Description

Dynapac CA302PD 2011 Parts Catalog – OEM Factory Spec

I have lost count of how many times a junior tech handed me a busted roller and said “the parts book had the wrong seal number.” That is what happens when you bet on aftermarket reprints. The Dynapac CA302PD 2011 Parts Catalog is not a reprint – it is the original PDF used by dealers in Sweden and shipped with the machine. 364 pages, serial number 10000116x0A000001 and up. If your CA302PD is within that range, this is the only document you should be touching when ordering parts.

You want to know why I walk across the shop for this manual? Because on page 2 it lists the exact six fields you must supply when ordering – type, serial number, quantity, part number, denomination, and dimensions. Miss one field and you get the wrong eccentric shaft kit (4700945657) and waste a week. That is not a risk I take with a machine that costs $200,000.

Engine and Transmission Breakdowns

The Cummins QSB 4.5C diesel gets its own section with part numbers for the cooling system, combustion air system, fuel system, and exhaust system. You need a fuel line? The part number is right there with the exploded view – no guessing. For the transmission, the rear axle comes in two variants: limited slip (4700383857) and No-Spin (4700383856). Each has its own differential housing, brakes, and planet gear parts. This catalog breaks them apart so you can order exactly what broke, not the whole assembly.

What This Catalog Covers

Every major system gets a dedicated chapter. Service kits for 50, 500, and 1000 hours – part numbers 4700945789, 4700950323, and 4700945791. Repair kits for the steering hitch, eccentric shaft, drum rotation, shock absorbers, and the F/R control button. Frame parts including scrapers, hitch, structure, and noise suppression options. Drum assembly with the vibration side cartridge and drive side cartridge – drum gear number 4700372987. Hydraulic system splits into front propulsion motor (4700371509), rear propulsion pump (4700380830), vibration pump (4700383958) with rotary group and valve block, steering cylinder (4700392002), and the brake system. Electrical equipment covers the instrument panels, emergency stop, driving lights, working lights, beacon, compaction meter, and GPS options. Driver platform includes cabs (4700383030 and 4700392479) with heater, wipers, mirrors, and radio options. Decals and standard equipment round it out.

If you do not see your specific option in that list, check the table of contents – this catalog is exhaustive.

OEM vs Aftermarket: Why This Wins

I have seen aftermarket parts catalogs that swap the nut and bolt positions because somebody scanned the book at 72 DPI and called it good. Then the mechanic reads the torque spec from that scan and trashes a $4000 vibration pump. The Dynapac CA302PD Parts Catalog comes from the same files that Dynapac prints from. The exploded views are sharp enough to read the reference numbers, and the table of contents mirrors the physical book. You get the exact same information a Dynapac dealer has.

Hydraulic and Vibration Systems: Assembly Data

When the dual speed drum drive option is installed, the parts catalog shows the exact hydraulic motor and pump configuration. The vibration system uses pump 4700383958 with rotary group 4700937167 and valve block 4700937168. If you are rebuilding the drum, the eccentric shaft kit includes every bearing and seal – no separate trips to the parts counter. The manual also covers the central test panel and the compaction analyzer option, so you can verify pressures with the correct fittings.

Electrical and Driver Platform Diagrams

Instrument panel wiring is shown for the main panel, upper left, upper right, lower left, and lower right – plus the emergency stop and parking brake panel. Option panels like the tachograph (platform and cab), back-up alarm, and GPS are included. The driver platform chapter even covers the steering column, turning controls, forward/reverse control, and the ROPS/FOPS structure. For the cab, interior panels, screens, doors, wipers, mirrors, and heater system are all broken into individual parts. Want to order a new heater core? The cab heater kit is 4700385434 – right there.

Ordering Parts by Serial Number

Page 2 of this book tells you exactly what to say when you call a dealer. Type of machine, roller serial number, quantity required, part number, parts denomination, and dimensions if ordering by length. I keep a copy of that page next to the shop phone. It keeps the conversation under two minutes and avoids the “we shipped the wrong seal” phone call a week later. If your CA302PD has serial number 10000116x0A000001 or higher, this catalog matches your machine.

FAQ

Does this parts catalog include torque specifications?

No. This is a parts catalog, not a service manual. It lists part numbers, exploded views, and ordering information. For torque specs you need the factory service manual.

Can I use this catalog to identify parts for a CA302PD with a different serial number range?

It is valid from serial number 10000116x0A000001 and up. If your machine is older, you will need the earlier edition (SCA302PD-4EN1 or -4EN2). The 2011 edition replaced the 2010 version. Check your serial number against the chart on page 1. If yours falls in the range, the part numbers are accurate. If not, you risk ordering a drum gear that does not fit – I have seen it happen. Stick with the correct edition.

This is not a generic aftermarket scan. It is the official Dynapac spare parts catalogue, in English, Swedish, German, Italian, Spanish, and French. 364 pages, indexed, with every option listed. If you are rebuilding a CA302PD or stocking parts for your maintenance trailer, you need this. Access the Factory Manual and start ordering the right parts tomorrow.

• Dynapac CA302PD Parts Catalog
• DYNAPAC CA302PD Spare Parts Catalogue
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Automotive Industry Overview