Description

Dynapac CA262D Parts Catalog – OEM Spare Parts Reference

Too many parts catalogs out there are reprints of reprints, scanned at 72 DPI, with part numbers so blurred you cannot tell a 12mm bolt from a 14mm one. That is not what you get here. The Dynapac CA262D Parts Catalog is a 357-page factory document, published by Dynapac themselves. If you are ordering spares for a CA262D vibratory roller and you want the right piece without playing “will this fit?” with the parts counter, this is the book that will keep your machine running. No aftermarket compilation, no third-party redraw – this is the print used by Dynapac dealers around the world.

357 Pages of Factory Parts Data

Every page in this catalog comes from the Dynapac master files. The book covers the CA262D from the Cummins 6BTAA 5.9C diesel engine to the drum drive and vibration system. Each exploded view is keyed to a part number, and those numbers are verified against Dynapac’s own inventory system. You get 357 pages of nothing but OEM part listings – no service procedures, no wiring diagrams; this is a pure parts reference, built for ordering with confidence. If you have ever waited two weeks for a seal that turned out to be the wrong cross-section, you understand why having the factory parts catalog matters.

Ordering Spare Parts: The 6-Step Process

Page 4 of this catalog prints the exact six pieces of information Dynapac requires to fill an order: machine type, roller serial number, quantity, part number, part denomination, and dimensions for material sold by length. That is not a suggestion – it is the procedure. When you call your dealer, you hand them the serial number from your roller’s data plate, then read the part number straight from this catalog. No guesses, no “I think it’s the one near the hydraulic filter.” You give them the 6-digit number, they ship the correct item. The serial number range in this edition covers rollers from *67520262* upward, powered by the Cummins 6BTAA 5.9C.

What the CA262D Parts Catalog Covers

This catalog breaks down the CA262D vibratory roller into logical groups: engine, transmission, hydraulic system, drum assembly, frame, cab, and electrical. Each group contains multiple subgroups. For example, the engine section lists the complete Cummins 6BTAA 5.9C with all its external components – fuel system, cooling, air intake. The vibration drive is separate, with its own pump and motor parts. You can trace a part from the group index on the first page of each section to the exploded drawing, then to the part number table. The grouping is standard Dynapac: groups 1 through 30 plus service info pages. It is a system that works once you know the layout.

Why OEM Documentation Beats Aftermarket Reprints

Aftermarket parts catalogs often redraw the illustrations from photographs. Bearings get mislabeled, bolt lengths get rounded, and “as required” parts like seals or O-rings are omitted entirely. This catalog is an original Dynapac publication – printed in Sweden, with the actual part numbers assigned by the factory. The difference shows in the detail. When you order a hydraulic filter from this catalog, you get the Dynapac part number that matches the canister size and thread pitch. Aftermarket catalogs sometimes skip the thread dimensions, leaving you with a filter that fits but does not seal correctly. That is the difference between a job done and a job done right.

Verify Your Serial Number Before Ordering

Before you dive into the part diagrams, locate the serial number on your CA262D. It is stamped on the frame near the engine. The serial number determines which catalog issue you need. This edition (SCA262D-2EN4) was published in 2008/2009 and covers rollers from serial *67520262* and onward. If your machine is older, you may need the SCA262D-2EN3 or earlier. Check your serial against the table inside the front cover. Ordering parts for the wrong revision is a common mistake – this catalog eliminates that risk by listing which serial ranges each part applies to.

Does this catalog include torque specs or repair instructions?

No. This is a parts catalog, not a service manual. It lists components and part numbers only. You need the workshop manual for torque values and disassembly procedures.

How do I find the correct part for my CA262D roller?

Start with your roller serial number. Then open the catalog to the group that covers the assembly you are working on – for example, group 10 for the engine. Find the exploded drawing, identify the part you need by its location on the drawing, then locate the corresponding row in the parts table. Write down the part number, denomination, and quantity. Call your Dynapac dealer with your machine serial number and that part number. If you cannot identify the part from the drawing, check the index at the back of the catalog which lists part numbers alphabetically by description. This process takes five minutes and saves you from ordering the wrong component.

Related manuals you might need for your CA262D: Dynapac CA262D Spare Parts Catalogue covers the same roller with an earlier serial range. Dynapac CA262D 2009 Parts Catalog – Factory OEM Specs is a later edition with updated part numbers for newer rollers. Dynapac CA262D Parts Catalog – 357 Pages of Factory Specs gives you the complete exploded view set. For manufacturer support, visit Dynapac directly. If you want a broader view of the heavy equipment industry, check the Automotive Industry Overview.

Access the Factory Manual now to get the official part numbers for your CA262D vibratory roller. Stop guessing which seal or bearing fits – let the factory document decide.