Description

Dynapac CA250D Parts Catalog – Factory Spare Parts Breakdown

If you’re ordering parts for a Dynapac CA250D and you don’t have the factory parts catalog in front of you, you’re burning money and downtime. I’ve seen guys guess at part numbers, order the wrong bearing, then wait a week for the right one while the roller sits. That’s not how you run a shop or a job site. This Parts Catalog is the original OEM document – not some aftermarket reprint with missing pages. It runs 222 pages and covers the vibratory roller CA250D with the CUMMINS 4BTAA 3.9C diesel engine. You get exploded diagrams, part numbers, and the exact ordering procedure Dynapac uses in Sweden. That’s what you need to get the right part the first time.

What the CA250D Parts Catalog Actually Contains

This isn’t a repair manual. It’s a parts catalog. That means every page is laid out to show you the assembly – group numbers, part numbers, quantities, and descriptions. The catalog is organized by machine groups, and each group has its own page range. You’ll find the vibratory roller CA250D with serial number ranges starting from *65820251* for the SCA250D-2EN3 edition. The book covers the CUMMINS 4BTAA 3.9C diesel engine, but note: the engine itself is covered by its own OEM manual – this catalog handles everything bolted to the machine. You get the frame, drum, hydrostatic drive, steering, and electrical subassemblies identified with factory part numbers. No generic cross-references. Dynapac CA250D Parts Catalog – OEM Factory Spare Parts Guide 222 Pages covers the same machine with the same level of detail.

Why Serial Numbers Matter When Ordering Parts

Dynapac is specific about serial number ranges. Page 3 of this catalog shows the valid from roller serial number: *65820251*- for the SCA250D-2EN3 catalogue issue. If you order a part without checking that number, you might get a component designed for an earlier revision that doesn’t fit. I’ve seen it happen with vibration dampers – wrong bolt pattern, wrong offset. The catalog clearly marks which serial numbers apply to each machine version. You need to have that number stamped on your roller before you open this book. Dynapac CA250D 2006 Parts Catalog – Factory Spare Parts Guide includes the same serial number validation for 2006 production runs.

Engine Specifics: CUMMINS 4BTAA 3.9C

The CA250D uses a CUMMINS 4BTAA 3.9C four-cylinder turbo diesel. The parts catalog includes the engine-related components mounted on the frame – fuel system brackets, air intake piping, exhaust manifold, and vibration isolators. But the internal engine parts (pistons, rings, injectors) are in the separate CUMMINS engine manual. What this catalog gives you are the Dynapac-specific part numbers for engine mounts, hoses, and interfaces. If you need a water pump for the engine itself, you go to CUMMINS. If you need the coolant hose that goes from the engine to the radiator – that’s in this catalog. Keep the two manuals on the same shelf. Dynapac also publishes service bulletins for updates, but this parts catalog is the baseline.

Order Parts Using the Factory Checklist

Page 4 of the catalog spells out exactly what you need when you call the dealer: 1) machine type (CA250D), 2) roller serial number, 3) quantity, 4) part number, 5) part denomination, 6) dimensions if ordering by length. That’s it. Six pieces of information. Every time I’ve seen a wrong part show up on a job site, it’s because somebody skipped one of those six. The parts guy can’t guess what you need if you haven’t pulled the exploded view and written down the number. Use page 4 as your checklist. Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec follows the same ordering protocol for another Dynapac model.

Three Reasons to Stick with OEM Documentation

First, the part numbers are verified by Dynapac. Aftermarket parts catalogs often substitute generic numbers that may or may not match the original thread and fit. Second, the diagrams are drawn from the actual production drawings – you see the assembly exactly as it came from Karlskrona. Third, the catalog includes revision updates. The SCA250D-2EN3 version supersedes earlier EN1 and EN2 editions. If you buy a reprint, you get whatever version the reprint house copied – might be obsolete. This is the genuine factory PDF, 222 pages, scanned from the original print. No missing pages, no guesswork. Automotive Industry Overview but for construction equipment, the same principle applies – factory documentation is the only reliable source.

Frequently Asked Questions

Does this catalog include torque specs for reassembly?

No. This is a parts catalog, not a service manual. Torque values are in the Dynapac service manual for the CA250D.

How do I find the right part number if the diagram shows multiple options?

Look at the remark column on the text pages (page 5 shows the layout). Each part entry has a notes column that indicates changes or serial number applicability. If you see a remark like “from serial 65820251”, that part applies only to rollers after that number. The catalog also lists which catalogue issue matches your machine serial – check page 3 for the valid from line. If you’re still unsure, call your Dynapac dealer with your serial number and the page number of the diagram. They can confirm the supersession chain. The 222-page catalog is designed to eliminate exactly this confusion.

If you’re working on a Dynapac CA250D and you want to order parts without the hassle of returns and wrong shipments, get this catalog on your workbench. It’s 222 pages of factory-correct part numbers and exploded views, organized exactly the way Dynapac intended. Access the Factory Manual now and keep it with the machine.