Description

Dynapac CA250D 2010 Parts Catalog – Factory OEM Spare Parts Diagrams

I’ve spent over half my career watching guys order the wrong bearing because they trusted an online cross-reference instead of the factory book. You end up with a machine down for three days waiting for the right part. The Dynapac CA250D 2010 Parts Catalog kills that guesswork. This is the same 214-page document Dynapac dealers use. It’s not a reprint or a scan of a scan – it’s the original factory PDF from 2010, covering serial numbers 10000108x0D0007649 through 0D007658.

What Makes This Parts Catalog Different from Aftermarket?

Aftermarket parts catalogs are compiled by people who never touched a CA250D. They take a grainy diagram from a third-party source, slap generic numbers on it, and call it a day. This manual came straight from Dynapac. Every part number, every exploded view, every revision note is exactly what the factory issued. The table of contents alone shows 23 major groups – from service kits (50h, 500h, 1000h) to the drum, engine, transmission, hydraulic system, electric system, and driver’s platform. Each group breaks down into sub-assemblies with part numbers that match the real hardware. If you’re working on a CA250D, you need factory-accurate data or you’re gambling with downtime.

7 Major Systems Covered in This 214-Page Catalog

The catalog organizes everything by system. Here are the seven main ones you’ll use most:

• Frame – includes frames, scraper and beam, scrapers (urethane rubber option and spring steel option), hitch, structure, side covers, noise suppression.
• Drum – drum assembly, drum cartridge drive side and vibration side, drum gears (part numbers 4700380462 and 4700372987).
• Engine – Cummins QSB 4.5 C with cooling, combustion air, fuel, and exhaust systems.
• Transmission – rear axle options (limited slip, No-Spin), differential housing and brakes, planet gears. Three rear axle part numbers are listed.
• Hydraulic system – propulsion front and rear (motor and pump), vibration system (motor and pump with rotary group and valve block), steering system (valve and cylinder), brake system, central test panel.
• Electric system – complete wiring, control panel, working lights, rotating beacon, back-up alarm, compaction meter options.
• Driver’s platform – platform, control panel, forward/reverse control handle, steering column, canopy, ROPS/FOPS, cab (including screens, door, interior rear mirror, wiper, and cab electric).

Plus, you get decals, standard equipment, and optional equipment sections including air conditioner, heater, Dy-Mic, and pad shell. That’s the whole machine in one book.

How to Use the Numerical Index to Find Any Part

The catalog ends with a numerical index that lists every part number in alphanumeric order. Need a specific gear? Look up 4700380462 in the index, and it tells you which page and which exploded view shows that gear. Before you fire up your computer, though, take a minute to read page 3 – the ordering instructions. Dynapac gives you six pieces of info you must provide to get the right part: machine type, roller serial number, quantity, part number, part denomination, and dimensions if ordering by length. I’ve seen orders get held up because a guy skipped the serial number. Don’t be that guy.

Engine Coverage: Cummins QSB 4.5 C

The CA250D runs a Cummins QSB 4.5 C diesel. This catalog dedicates a full section to that engine: cooling system, combustion air system, fuel system, exhaust system. Each component – water pump, turbocharger lines, injectors, filters – gets its own exploded diagram with the factory part number. If you need a fuel line for that engine, you’re not guessing which generic line fits. You take the part number from this catalog and order it. That’s how you keep a job moving instead of sitting on the phone with parts suppliers who read the same cross-reference you’re trying to avoid.

Does This Catalog Cover Your Specific Serial Number Range?

This manual is valid only for serial numbers 10000108x0D0007649 through 0D007658. If your CA250D falls outside that range, you need the correct issue. Dynapac updates part numbers and supersessions over time. Using the wrong catalog means you might order a part that was superseded five years ago. Check the serial number plate on your machine before you purchase. The catalog issue date is 2010-11, and the part numbers match the machine build for that range. For machines outside, you’ll want the corresponding catalog – and yes, we have those too.

Frequently Asked Questions

Is this a repair manual or a parts catalog?

Parts catalog only. It contains exploded views and part numbers, not step-by-step repair instructions.

How do I order parts using this catalog?

Page 3 lists the 6 required pieces of info: machine type, serial number, quantity, part number, denomination, dimensions if by length. Always provide the serial number.

Does it include torque specifications?

No. This is a parts catalog, not a service manual. It does not contain assembly torque values, fluid capacities, or adjustment specs. You need the separate service manual for those. However, the parts catalog is essential for ordering the correct seals, bearings, and gaskets, which are often mismatched when using aftermarket cross-references. Once you have the right part number, you can look up torque specs in the service manual.

Can I use this for a CA250 with a different serial number?

Only if your machine falls within the serial range listed: 10000108x0D0007649 to 0D007658. Dynapac updates part numbers frequently. Using the wrong catalog leads to wrong parts.

If you’re tired of chasing parts and want the exact factory diagrams that Dynapac dealers use, access the factory manual from AutoRepairManuals right now. You’ll have the PDF on your tablet or workstation in minutes – no waiting for a physical book to ship. Every part number is verified from the original 2010 release. Do you want to waste another afternoon cross-referencing numbers from a third-party site? Or do you want to get that roller back to work? The choice is yours.

Related Manuals

• Dynapac CA250D Parts Catalog
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer
• External reference: Dynapac – manufacturer site
• External reference: Automotive Industry Overview – context on documentation standards