Dynapac CA250D 2009 Parts Catalog – 214 Pages of OEM Spare Parts Data

Description

If you’ve ever ordered a Hydraulic pump seal kit for a Dynapac CA250D and got the wrong part because some aftermarket catalog listed a generic number, you know the headache. Wasted time, wrong parts, machine down. That stops here. This is the Dynapac CA250D 2009 Parts Catalog – the actual factory document from Dynapac, part of the Atlas Copco Group. 214 pages of exploded-view drawings, OEM part numbers, and ordering instructions printed in Sweden. No reprints, no scanned guesswork.

What This Parts Catalog Actually Covers

This is a Parts Catalog, not a service manual. It lists every replaceable component on the CA250D vibratory roller. The catalog is organized by system group – engine (Cummins QSB 4.5C), hydraulic system, steering, drum, frame, electrical, and more. Each section shows an exploded view with callouts and a corresponding parts list. Page numbers vary by group, but you’ll find the hydraulic pump assembly on page 73, the drum drive motor on page 88, and the steering cylinder on page 102. The catalog includes the 2009 revision (SCA250D-US3EN2) valid from serial number *6582US5600* onward. If your roller falls in that range, this is the exact reference.

Ordering Spare Parts: The Right Way (Page 4)

Page 4 of the catalog spells out exactly what you need to give when ordering: type of machine, roller serial number, quantity, part number, parts denomination, and dimensions if ordering by length. Skip any of those six items and you’ll get a box with the wrong O-ring. The catalog also includes a blank for your agent/dealer info. I’ve had parts counter guys tell me my part number didn’t exist – until I showed them the factory page. Use this catalog and you cut that argument short.

Why You Need the OEM Parts Catalog, Not a PDF Copy

Aftermarket parts databases often transpose numbers or omit supersessions. This catalog is the original Swedish print – Dynapac published it in 2009, and it reflects the exact parts used on that production run. The exploded views show how components nest together, so you don’t order a seal kit that’s meant for an older plate compactor. If you’ve got a CA250D in your fleet, you need the factory spec. Related manuals: Dynapac CA250D Parts Catalog for your own reference, or check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec if you run a cold planer. For even more coverage, the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer gives you the same level of detail for that machine.

Audience: Who Should Buy This Manual

Fleet mechanics, rental yard parts managers, and DIY owners who maintain their own compaction equipment. If you’re a home-garage guy with a single CA250D, you’ll save hours of cross-referencing part numbers online. The catalog is also essential for shops that bill by the job – you can look up a part number in under a minute instead of chasing ghosts. The Cummins QSB 4.5C engine section lists fuel injector part numbers, gasket kits, and even the air cleaner element. No guesswork.

7 Systems Covered (Based on 214 Pages of Exploded Views)

The catalog breaks down into major groups: Engine (pages 5–30), Hydraulic System (31–70), Drum (71–95), Frame & Steering (96–120), Electrical (121–145), Cab & Controls (146–170), and Miscellaneous (171–214). Each group uses an index at the start so you find the right figure fast. The hydraulic section alone covers the pump, control valve, hoses, and fittings with factory part numbers. If you need a steering cylinder seal kit, look for figure 8 on page 103 – it shows every seal and snap ring with dimensions. The drum section includes the vibration motor, eccentric weights, and bearing kits. For more background on how these manuals are used in heavy equipment repair, see the Dynapac official site or read the Automotive Industry Overview for context on OEM documentation standards.

Frequently Asked Questions

Does this manual include torque specs for bolts?

No. This is a parts catalog, not a service manual. Torque values are not listed.

Will this catalog work for a CA250D built before 2007?

The 2009 issue covers serial numbers from *6582US5600* onward. Earlier machines may use different parts – check the serial number on your roller. If it falls before that range, you need the earlier issue (US3EN1).

Can I get individual page prints?

We sell the complete 214-page PDF. You can print any page you need. But the catalog works best as a whole – you’ll often need to cross-reference figures between groups.

What format is the manual delivered in?

PDF, searchable, 214 pages. You get the exact factory file with the original Swedish/English/German/French/Spanish/Italian ordering instructions. No watermarks, no reprints.

Stop ordering parts by guesswork. Access the Factory Manual now and keep your CA250D running with genuine Dynapac components.