Description

Dynapac CA182D Parts Catalog – 292 Pages of Factory Parts Data

If you’re wrenching on a Dynapac CA182D vibratory roller and need to order replacement parts, you already know the headache of guessing part numbers. I’ve seen guys pull a seal, eyeball it, and order the wrong one three times before calling the dealer. That’s billable time down the drain. This factory Parts Catalog cuts that crap out. It gives you the exploded diagrams, the exact part numbers, and the ordering specs straight from Dynapac themselves.

Let me be blunt: aftermarket parts lists are garbage for construction equipment. They use generic numbers that don’t cross-reference. You end up with a part that almost fits. This OEM catalog has 292 pages of drawings and part callouts that match the roller on your shop floor. No guesswork. You get the factory numbering system, the supersession notes, and the correct denominations. Page 4 lays out the six pieces of information you need to give when ordering: machine type, roller serial number, quantity, part number, denomination, and dimensions. Miss one of those and you’re waiting another week for the wrong part.

Ordering Spare Parts: The 6-Point System

The manual includes a full multilingual ordering guide on page 4. English, Swedish, German, Italian, Spanish, French – they all list the same six data fields. DYNAPAC CA182D Parts Catalog shows you exactly how to fill out a parts request so your dealer sends the right box. For example, if you need a hydraulic hose cut to length, you must give the dimension in meters. Skip that and you get a straight piece you can’t use. I’ve seen it happen. The catalog also notes that serial numbers matter. This edition (SCA182D-2EN3) covers rollers from 64720182 to 64722399 with the CUMMINS B4.5T engine. If your roller falls outside that range, you need a different issue. The front matter tells you exactly which edition matches your serial number.

292 Pages of Exploded Views and Part Numbers

292 pages sounds like a lot, but every page is used. Group numbers organize sections: engine, drum, frame, hydraulic system. Each group has its own table of contents. The drawings show each component in exploded view with a part number balloon. You don’t have to decipher some generic picture of a roller. These are the same prints the assembly line used. I’ve used this catalog to find a specific bearing in the vibratory system – took me three minutes. Compare that to crawling under the machine with a micrometer.

Why Factory OEM Documentation Beats Aftermarket

I’ve said it a hundred times: aftermarket parts catalogs for heavy equipment are a liability. They often omit superseded part numbers, use wrong thread pitches, or skip the “valid for serial number” range. This is OEM from Automotive Industry Overview (not a direct comparison, but the principle applies – factory documentation is the gold standard). The Dynapac Part Catalog includes change notes and group pages that track revisions. Page 5 has a “Changes” section where you can see which parts were updated. That’s stuff aftermarket reprints don’t bother to reproduce. You pay for accuracy, and that’s what you get here.

Serial Number Verification: The First Step

Before you order anything, check your roller’s serial number against the range listed on page 3. This catalog is valid for CA182D rollers with serial numbers between 64720182 and 64722399. If your machine falls outside that window, you need the earlier edition (SCA182D-2EN2) or a later one. I can’t stress enough: ordering a part from the wrong catalog issue sends you down a rabbit hole of returns and downtime. The manual makes it clear. It says “Valid from roller serial number:” and gives the range. Respect that.

Does This Catalog Cover All CA182D Models?

No. This specific Parts Catalog covers the CA182D with CUMMINS B4.5T engine for the serial number range noted. There are multiple editions: SCA182D-2EN1 (2004-10), SCA182D-2EN2 (2006-01), and this one SCA182D-2EN3 (2008-10). Each supersedes the previous. The catalog lists the exact replacement history. If you have a CA182D with a different engine or older serial number, you need the matching edition. DYNAPAC CA182D Spare Parts Catalogue SCA182D-3EN2 – Section: Spare Parts Catalog might cover a later production run. Always match the edition to your machine’s serial number.

What information do I need to order parts from this catalog?

You need the roller serial number, part number from the diagram, denomination, quantity, and dimensions if ordering by length. Page 4 lists all six fields.

How many pages does the Dynapac CA182D Parts Catalog have?

292 pages of OEM data including exploded views, part tables, and ordering information.

Is this an OEM manual or a reprint?

This is the original factory spare parts catalogue from Dynapac (part of Atlas Copco Group). Not a copy or aftermarket compilation. The PDF is direct from the factory print.

Will this catalog work for a CA182D with a serial number outside the range 64720182-64722399?

No. The manual is valid only for that range and engine configuration. You need the edition that matches your serial number. Check the front matter for supersession info.

If you’re rebuilding a Dynapac CA182D and need the correct part numbers without the runaround, this is the file to have in your shop. DYNAPAC CA182D Vibratory Roller Spare Parts Catalogue gives you the factory drawings and part data. Access the Factory Manual from AutoRepairManuals and get the right parts the first time.