Description

Dynapac CA152D Parts Catalog – 324-Page OEM Spare Parts Manual

Nothing burns billable hours like ordering the wrong part. You pull a seal, find it’s the wrong size, then spend another day waiting on the right one. That’s why I keep the OEM parts catalog within arm’s reach—not some aftermarket PDF that renumbers everything. The Dynapac CA152D Parts Catalog is the factory-issued 324-page document that matches rollers starting from serial number 10000105x0A000001. It’s printed in Sweden by Dynapac themselves. No guessing, no cross-referencing third-party databases.

Service Kits and Repair Kits – Page Layout

The first section of this catalog breaks down all the scheduled maintenance kits. You’ll find part numbers for the 50-hour service kit (4700950399), the 250/750-hour kit (4700939076), 500-hour (4700950401), and 1000-hour (4700950402). Each kit listing includes every gasket, filter, and O-ring you need. Below that, the repair kits cover the steering hitch (4700938558), eccentric shaft (4700938898), drum rotation (4700938891), shock absorber kit for the drum (4700938876), and even the F/R control button kit (4700940663). If you’re rebuilding any of those assemblies, this page tells you exactly which parts to order.

Engine Cummins QSB3.3 – Fuel System and Cooling

Under the Engine section, the catalog splits into the Cummins QSB3.3, cooling system, combustion air system, fuel system, exhaust system, and an option for an extended exhaust pipe. Each subsystem gets its own exploded diagram with reference numbers. Need a fuel injector line? Look up the part number from the diagram, then cross-check it against the parts list. This is not a repair manual—it’s a parts identification tool. You don’t get torque specs here (that’s the service manual’s job), but you do get the exact factory designations that keep your parts counter from shipping the wrong injector.

Hydraulic System – Propulsion and Vibration

The hydraulic section covers front propulsion motor (4700372250), rear propulsion pump (4700380829), vibration pump (4700384751), and hydraulic motor for vibration (4700380144). Steering gets its own pilot valve (4700359139) and steering cylinder (4700392002). There’s also a brake system section and hydraulic oil tank. If you’re replacing a steering cylinder on a CA152D, this catalog gives you the OEM part number so you don’t end up with a generic cylinder that doesn’t match the mounting brackets. Options like the central test panel are listed too, so you know exactly which parts belong to the optional kits.

Electrical Equipment – Panels and Options

Electrical section starts with the main electric system, relay and fuses, instrument box, and then splits into six instrument panel sub-sections: Main, Upper left, Upper right, Lower left, Lower right, Emergency stop panel, and Emergency and parking brake panel. That level of detail matters when you’re chasing a short in the dash. Optional equipment includes driving lights, working lights, rotating beacon, compaction meter, speedometer/frequency meter, tachographs for platform/cab/simple cab, back-up alarm, headlight cover, field computer assembly, compaction analyzer, Geodynamic compaction indicator, and even GPS options. Every option has its own part number and diagram page reference. Page 73 lists the entire instrument panel layout for the main panel.

Does This Catalog Cover All CA152D Serial Numbers?

Yes—the catalog is valid for rollers with serial number 10000105x0A000001 and up. The catalogue issue SCA152D-4EN2 supersedes the earlier SCA152D-4EN1 (dated 2010-03). If your roller is older than that serial number range, you might need a different issue. Always verify your roller’s serial number against the catalogue’s validity range. Dynapac CA152D Parts Catalog covers the exact same part numbers as the factory binder. For a list of related spare parts catalogues, check Dynapac CA152D Spare Parts Catalogue and DYNAPAC CA152D Spare Parts Catalogue SCA152D-2EN4.

Frequently Asked Questions

Is this a repair manual or a parts catalog?

Parts catalog. It shows exploded views and part numbers. No torque specs, no step-by-step repairs.

Does this include the Cummins QSB3.3 engine parts?

Yes. The Engine section covers the Cummins QSB3.3, cooling, fuel, combustion air, and exhaust systems with full part breakdowns.

Can I use this to order parts for a CA152D with a serial number before 10000105x0A000001?

It’s validated for that range and newer. Older rollers may have different part numbers. Compare your existing parts against the diagrams before ordering.

Why do I need the OEM catalog instead of aftermarket listings?

Aftermarket catalogs often renumber parts or miss options like the Geodynamic compaction indicator. This factory document guarantees every part number matches Dynapac’s current supply chain. You won’t get a call from the parts distributor saying “that number doesn’t exist.”

Down to it: you need part numbers that work. Don’t waste time with reprinted or third-party lists. Access the Factory Manual from AutoRepairManuals and get the 324-page OEM Dynapac CA152D Parts Catalog on your screen today.