Description

Dynapac CA152AD Parts Catalog

If you’re wrenching on a Dynapac CA152AD and you don’t have the factory Parts Catalog on the bench, you’re going to waste time on wrong parts and backorders. I’ve seen guys order a final drive seal by eyeball and end up with a transmission gasket. That’s money down the drain. This is the genuine Automotive Industry Overview doesn’t apply here – this is heavy compaction gear, but the principle is the same: use the right document.

298 Pages of Exploded View Diagrams

Every assembly in the CA152AD is drawn out – engine, hydraulic system, vibratory mechanism, frame, cab. Each exploded view has callouts with part numbers. You don’t guess. You point at the diagram, read the number, and order. Dynapac CA152AD Parts Catalog matches the same layout as the service manual for the same machine. The catalog covers serial number range starting at *64521620* and lists the Cummins 4B 4.5T diesel as the power plant. Page numbers? Not important here – the sections are grouped by function, and each group has its own page index printed at the beginning.

How to Order Parts Correctly

The first few pages of this catalog spell out exactly what information you need to give your dealer: machine type, roller serial number, quantity, part number, part name, and dimensions if ordering by length. Six items. Miss one and you get the wrong part. I’ve seen guys skip the serial number and receive a set of bolts that don’t fit because Dynapac changed the frame mount in 2006. This manual saves you that headache. DYNAPAC CA152AD Spare Parts Catalogue includes the multilingual ordering form (English, Swedish, German, Italian, Spanish, French) so you can hand the sheet to your parts guy and walk away confident.

3 Reasons You Need the Factory Parts List

First, aftermarket databases often swap part numbers for similar-but-not-identical components. Second, the OEM diagram shows exact fastener locations – bolt grades, torque specs aren’t in a parts catalog, but knowing which bolt goes where prevents cross-threading. Third, the catalog lists superseded numbers. If Dynapac updated a bearing in 2005, the old number is crossed out and the new one is noted. Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec follows the same philosophy, but you’re here for the CA152AD.

Identify the Right Cummins 4B 4.5T Components

Fuel system, cooling, starter, alternator – the engine section is separate from the roller chassis. The catalog shows the engine as a complete subassembly with its own exploded pages. You can order a water pump without guessing which side the inlet faces. Dynapac engineering set up these diagrams so that each part is shown in the orientation it mounts. The Dynapac CA152AD uses a specific fan belt that doesn’t interchange with other Cummins 4B applications – the catalog catches that.

Safety First: Verify Part Numbers Before Installation

Hydraulic hoses on a roller operate at pressures that can kill. If you install a hose with a wrong fitting, you get a blowout. The parts catalog cross‑references hose lengths and end fittings. One time a tech ordered a 24‑inch hose for the propel pump because he measured with a tape from memory. The part number from this catalog was for a 20‑inch hose with a 45° end. He caught it because the diagram showed the routing. That’s the value of the OEM source.

All 298 pages are scanned from the original printed Spare Parts Catalogue issue SCA152AD-2EN3 (published 2006-01). No aftermarket copy, no reprint. The PDF is searchable – type in a part number and you jump to the page.

Does this catalog include torque specifications?

No, this is a parts catalog, not a service manual.

How do I find the serial number on my CA152AD?

It’s stamped on the frame rail near the left rear wheel – a seven‑digit number starting with *645…* The catalog lists valid serial numbers starting from *64521620*. If your roller is older than that, you need the previous catalog issue (SCA152AD-2EN2). The order page at the front of the PDF shows which serial numbers are covered. You can also find the number on the engine data plate – the Cummins tag is on the valve cover. Write it down before ordering any engine internals because the 4B 4.5T had two different injection pump configurations depending on build date. The parts catalog uses the roller serial number to filter the correct engine parts, so always check both numbers against the tables at the back of the engine section.

When you need to order a single bolt or a complete hydraulic pump for your Dynapac CA152AD, this is the document that keeps you from buying the wrong part twice. Access the Factory Manual and get the exact part numbers from the source that built the machine.

• Dynapac CA152AD Parts Catalog
• DYNAPAC CA152AD Spare Parts Catalogue
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec