Description

Dynapac CA134D Parts Catalog

If you have ever ordered a part for a Dynapac CA134D Parts Catalog and got a box of wrong hardware because someone grabbed a number off a worn tag, you understand why I push genuine factory documentation. This 75-page spare parts catalogue is the only way to match the exact casting and fastener revisions that Dynapac released from serial number *81270135*-. The roller uses a John Deere 5030TF270 diesel engine, and the hydraulic lines have changed across production runs. Without this catalogue, you are guessing dimensions and hoping the threads match. I have seen a shop blow a week on a water pump pulley that was two millimeters off because they used a third-party cross-reference. Do not be that shop.

75 Pages of Exploded Views and Part Numbers

Every section in this catalogue uses exploded line drawings that break the CA134D into functional groups. You get the exact part number, quantity required, and the official description in six languages. Page 4 gives you the ordering checklist: machine type, roller serial number, quantity, part number, denomination, and dimensions when ordering by length. If you skip any of those six items, expect delays. The notes section on page 5 explains how to read the group and page structure – pay attention to that because some components have superseded part numbers that are only flagged in the remarks column.

Groups cover the complete machine: engine assembly, drive train, vibratory system, steering, frame, and electrical. Each group starts with a title block that lists the applicable serial number range. If your roller falls outside that range, you need a different catalogue issue. This copy is SCA134D-1EN1, published 2006-10, valid from serial number *81270135*-. Verify your machine before you order.

Ordering Spare Parts: The Correct Procedure

Page 4 spells out the six fields required for every order. I have watched guys write down only a part number and then complain when the wrong seal arrives. Write the roller serial number first – that identifies the configuration. Then quantity, part number, part name, and if it is a hose or cable, the exact length. The catalogue lists dimensions in millimeters. Convert to inches if you need to, but do not round. A 12.7 mm hose is not a half-inch hose when the fitting calls for metric O-rings.

Dynapac uses a structured part numbering system. The first digits identify the component group; the last digits are the sequential item number. When you look at the exploded view, the balloon numbers correspond to the part number list below. Cross-reference the balloon number against the table, then verify the description matches what you see on the machine. If the description says “pump – hydraulic – 14 cc” and your pump has a different displacement, call your dealer before ordering.

Genuine OEM Documentation vs Third-Party Lists

Third-party parts sources often recompile numbers from old microfiche scans or from memory. They miss revision letters. This catalogue came directly from Dynapac Sweden – Box 504, SE-371 23 Karlskrona. The PDF is a direct scan of the printed catalogue, not a retyped list. Every part number has the same font, position, and revision that the factory used in 2006. If the factory updated a part, the remark column tells you. No guessing. No calling five dealers to see if a number is superseded.

This is the document you hand to your parts runner and say “order this exact number.” It is also the document you use when you want to confirm that the aftermarket hydraulic filter you bought has the same thread pitch. I have seen the aftermarket housing crack because the shoulder depth was 2 mm short. The exploded view shows the shoulder location. Check it.

Audience Fit: Who Needs This Document

If you own or maintain a Dynapac CA134D vibratory roller, you need this catalogue. Workshop owners who touch multiple rollers need a copy on the parts counter so technicians can identify components without disassembling half the machine. DIY owners who handle their own maintenance will save the markup that dealers add for research time – you look up the number yourself and order online or from a local dealer. The 75 pages cover every bolt, seal, hose, and bracket. No guesswork.

I also recommend this to anyone rebuilding a used CA134D bought at auction. The serial number on the machine plate might not match the engine serial. Use this catalogue to verify which group page applies. The engine section lists the John Deere 5030TF270 specific parts – injectors, turbo lines, gaskets. You can order those parts without pulling the engine first.

Frequently Asked Questions

Does this catalogue include torque specifications for assembly?

No. This is a parts catalog, not a service manual. Torque values are in the workshop manual. The catalogue only lists part numbers and views for ordering.

How do I find a part number if I only have the old number from a faded tag?

Look up the group that matches the component’s location (e.g., vibratory system, group 5). Find the exploded view. Match the shape of the part from the drawing. The balloon number will lead to the current part number. If the old number is listed in the remarks column as superseded, the new number is in the same row. You can also cross-reference the old number against the index page if your catalogue has one – page 5 explains the notes column where supersessions are documented.

Will this work for a CA134D built after 2007?

This catalogue is valid for serial numbers from *81270135*- onward. Later machines may have revised parts. Check the Dynapac website for updated catalogue issues. If your serial number is higher than the range listed on page 3, you need a later edition. Dynapac can confirm the latest part numbers for your specific VIN.

Are there electrical schematics in this catalogue?

Electrical components such as harnesses, relays, and switches appear in the electrical group, but full wiring diagrams are in the service manual. The parts catalog shows the physical layout and connectors – enough to identify the correct harness part number. For troubleshooting circuits, get the workshop manual.

I have used factory parts catalogs from Caterpillar, Deere, and Volvo for over twenty years. The Dynapac document is laid out the same way: clean drawings, logical grouping, and no ambiguity. If your shop touches compaction equipment, grab a copy of the Dynapac CA134D Parts Catalog now. Also check the Dynapac CA134D 2006 Parts Catalog – Factory Spare Parts Reference and the Dynapac CA134D 2007 Parts Catalog – OEM Factory Specs if your machine is a later build. For broader context on the construction equipment industry, see this Automotive Industry Overview. Access the Factory Manual and keep it on your shop tablet or print the exploded views for the wall. You will reference it every time a seal starts leaking or a hose rubs through.