Description

Dynapac CA 362 D 2002 Parts Catalog

You are tearing down a vibratory roller and you need a seal. You order one by guess. It doesn’t fit. Now you are down a day and a customer is waiting. That is why the Dynapac CA 362 D 2002 Parts Catalog exists. This is a 419-page OEM document from Metso Dynapac AB, printed in Sweden in 2002. It tells you exactly what part number to order for every nut, bolt, and hose on a CA 362 D with a Cummins 6BT 5.9C engine. No guesswork. No aftermarket approximations. Factory specs only.

Ordering Spare Parts: Six Things You Must Include

Page 4 of this catalog spells it out in six languages. When you call your dealer, you give: 1) machine type – CA 362 D, 2) roller serial number, 3) quantity, 4) part number, 5) part denomination, 6) dimensions if ordering by length. Miss one of those and you get the wrong part. I have seen it happen. The dealer sends a seal that fits a different revision, and the roller sits. This catalog lets you find the exact part number yourself from the exploded views. Then you read it off to the counterman. No back-and-forth. No excuses.

Cummins 6BT 5.9C Engine Coverage

That inline six-cylinder diesel is the heart of the CA 362 D. The parts catalog breaks down every engine component – block, head, injection pump, turbo, cooling system. Each assembly gets its own group number and illustration. You want the water pump gasket? Flip to the engine group, find the callout, read the part number. That number matches the Cummins OEM part. No aftermarket cross-reference. Factory spec all the way. If you also work on other Dynapac equipment, you might need a separate catalog for the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec. That one covers cold planer parts, a different animal.

Serial Number Range and Catalogue Updates

This catalog is issue SCA362D-1EN3, dated 2002-10. It supersedes SCA362D-1EN2 and SCA362D-1EN1. The valid serial number range starts at 72220362 and goes forward. If your roller is older than that, you need the previous issue. Do not assume a later catalog covers early machines. Dynapac changed parts over production. The catalog lists a “Valid from roller serial number” line – check it before you order. For an overview of how the automotive industry handles serialization in heavy equipment, see Automotive Industry Overview. The principle is the same: revisions matter.

Group Structure and Page Layout

Each group in the catalog covers a system. Group 3 is the engine, Group 4 is the transmission, and so on. The page header shows the group number and the page within that group. Below the illustration is a remarks section – notes about superseded parts, quantity changes, or special ordering instructions. The index at the front lists all groups and their page ranges. You want the vibratory system? Look up the group number, then flip to that page. The Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer uses a similar layout. Once you learn one Dynapac catalog, you can work any of them.

Who Needs This Parts Catalog?

If you own a 2002 Dynapac CA 362 D vibratory roller and do your own maintenance, you need this. If you run a shop that repairs these rollers, you need this. The DIY mechanic who wants to rebuild a roller engine without factory part numbers is going to waste time at the parts counter. This catalog eliminates that. It is not a repair manual – it does not tell you how to take it apart or what torque to use. It tells you what to order. Pair it with a service manual and you have the full picture. For the PL2000LS cold planer, the Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings serves the same purpose.

Frequently Asked Questions

What serial numbers does this catalog cover?

Valid from serial number 72220362 and above. If your roller is older, you need the earlier catalog issue (SCA362D-1EN2 or -1EN1).

Is this a repair manual or a parts catalog?

It is a parts catalog – 419 pages of exploded diagrams and part numbers. It does not contain step-by-step repair instructions. For that, you need the Dynapac service manual.

Can I use this for a CA 362 (non-D) model?

No. The CA 362 D has a different engine (Cummins 6BT 5.9C) and different driveline parts. Using the wrong catalog will give you wrong part numbers. Order the correct one for your model suffix.

How do I read the group numbers?

Each group number corresponds to a major system – engine, transmission, roller frame, etc. The group number appears at the top of every page. The index at the front of the catalog lists every group and its starting page. You can also search the PDF by group number if you have the digital version.

That catalog sits on a shelf in my shop. When I need a part for a CA 362 D, I pull it down, find the group, read the part number, and call the dealer. No confusion. No wrong shipments. Get the same result for your roller. For a broader look at how OEM documentation supports repair and maintenance, see Automotive Industry Overview. Then access the Factory Manual from this page and start ordering parts the right way.