Description

Dynapac CA 252 D Parts Catalog

I’ve seen too many rollers sidelined because someone ordered a part number from a third-party catalog that didn’t match. If you’re working on a Dynapac CA 252 D Parts Catalog for your vibratory roller, you need the real thing. This factory-issued spare parts catalogue from Dynapac (Metso Dynapac AB) gives you 419 pages of OEM part numbers, exploded views, and ordering instructions. No guesswork.

That’s why this catalog exists.

Dynapac CA 252 D Parts Catalog: 419 Pages of OEM Spare Parts

Inside this catalog, every component of the CA 252 D is broken down. You get group numbers, part numbers, denominations, and quantities. The diesel engine section covers the Cummins 4BTA 3.9 Elite. Each part is linked to an exploded diagram so you see exactly where it goes. Having 419 pages means every nut, seal, and hydraulic fitting has its own entry. I’ve used these for years – the numbering system is consistent across Dynapac machines.

Ordering Spare Parts: Six Critical Details

Flip to page 4. The catalog lists six things you must provide when ordering: type of machine, roller serial number, quantity, part number, parts denomination, and dimensions for lengths. I’ve had dealers reject orders because the serial number was missing. That wastes time. Write it down before you pick up the phone.

What Does This Catalog Cover Beyond Part Numbers?

It includes the published catalogue issues and valid serial number ranges. The current issue SCA252D-1EN5 applies to serial numbers from 66220253 onward. Earlier issues are listed on page 3 with supersession dates. There’s also a notes section (group III) for service info updates. This isn’t just a parts list – it’s a revision-controlled document.

3 Reasons to Choose the Factory Parts Catalog Over Aftermarket

First, the part numbers are verified by Dynapac. Aftermarket catalogs often transpose digits or skip revisions, which means you get a seal that’s the wrong durometer or a filter with the wrong thread pitch. I’ve had to reorder parts three times because of that. Second, the exploded views show correct assembly orientation – critical for hydraulic and drive components. One wrong orientation on a hydraulic pump coupler and you’re replacing a shaft. Third, the serial number tracking prevents ordering parts for the wrong machine revision. The catalog lists specific serial number ranges for each issue, so you know exactly which revision of the roller you have. You don’t get that from generic listings.

Understand the Serial Number and Issue Date Before Ordering

On page 3, the catalog lists issue dates and serial number ranges for each issue. If your roller’s serial number falls between 66220253 and the next range, you need issue SCA252D-1EN5. Earlier rollers require the previous issue. Ignore this and you’ll get parts that don’t fit. I’ve seen guys order a final drive seal for the wrong serial range – then wonder why it leaks.

Can I use this catalog to service the roller?

No. This is a parts catalog, not a service manual. You need the service manual for repairs.

How do I find the right part number for my roller?

Go through the exploded diagrams, note the group number, find the part number. You must have the serial number of your roller to confirm the correct issue of the catalog. The catalog includes a table of valid serial numbers per issue. If your roller serial number falls within the range listed for issue SCA252D-1EN5, that issue is the correct one. Use the part number exactly as listed. Do not rely on aftermarket cross-references.

Does the catalog include torque specifications or assembly instructions?

No. This is strictly a parts catalog. You won’t find torque specs or repair steps. For that, get the factory service manual.

What if my roller serial number is earlier than the earliest listed?

The catalog only covers serial numbers from 66220253 onward for issue SCA252D-1EN5. For earlier machines, you need the previous issue. Check the supersession table on page 3.

If you need parts for other Dynapac models, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec, Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer, and Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

For background on Dynapac’s engineering, visit the Dynapac site or read the Automotive Industry Overview for context on heavy equipment manufacturing.

Stop wasting time on wrong parts. Access the Factory Manual from AutoRepairManuals and get the exact OEM data for your Dynapac CA 252 D.