Description

Dieci Agri Plus 2010 Operators Manual

I’ve seen too many guys in the shop try to wing it with a third-party booklet that misses the critical safety warnings and torque tables. That’s how you snap a bolt or drop a load. The Dieci Agri Plus 2010 Operators Manual is the real deal – printed by Dieci themselves, 300 pages of factory data that tells you exactly how to operate and maintain that telehandler. None of that “generic fit” nonsense. You get the actual OEM chapter layout, the same one the dealer techs use.

Chapter A – Introduction, Guarantee, Vehicle Identification

Before you even think about starting the engine, you need to know your machine’s serial number. This manual devotes the first chapter (pages A/3–A/7) to vehicle identification, including the telehandler identification plate location and warranty terms. If you’re buying a used Agri Plus and the plate is missing, this manual tells you what to look for on the frame. That alone saves you from buying a machine with swapped components.

Safety Regulations – Do Not Skip This Section

Chapter B runs from page B/2 to B/19, covering protective clothing, emergency preparation, driving authorisations, and load handling procedures. The manual flat-out says: “A COPY OF THIS MANUAL MUST BE KEPT ON THE MACHINE WHERE IT CAN BE CONSULTED BY THE OPERATOR.” That’s not lawyer fluff – that’s liability protection. You want to know the correct way to park the vehicle or handle electromagnetic interference? It’s in there. Ignore this section and you’re asking for an OSHA visit or worse.

Torque Specs and Fluid Capacities – Where to Find Them

You need the charge pressure for the hydraulic system or the oil capacity for the transmission? The manual lists these in metric units (Dieci is Italian, after all). If your torque wrench reads in ft-lbs, you’ll need to convert, but the factory numbers are right there – no guessing. Page references for each subsystem are given in the TOC. I’ve seen aftermarket manuals round these specs; this one doesn’t.

One more thing: the manual includes the engine OEM supplement from the engine manufacturer. That means you get the specific filter part numbers and service intervals for the power unit, not generic “use any brand” advice.

What This Manual Covers – Real-World Use Cases

If you’re a home-garage enthusiast who bought a used Agri Plus for farm work, you need this to understand the daily inspection checklist (page B/4) and the correct lifting procedure (B/12). Professional mechanics will use the road travel instructions (B/14) and the prolonged inactivity storage prep (B/19). The manual also warns against unauthorised modifications – “It is also forbidden to carry out any modifications that could alter the structure or function of the machine.” That keeps you legal if you ever sell the unit.

300 Pages of Factory Data – No Reprints, No Abridgements

This is the full PDF scan of the original 2010 document, 300 pages, including the covers and the blank pages. The original file name is Dieci_Agri_Plus_2010_Operators_Manual_en-24631015774.pdf. You get the CE declaration, the warning about non-original parts, and the complete table of contents. No one has cut out the boring parts – every page is there.

OEM vs Aftermarket – Why This One Wins

Aftermarket manuals often skip the safety chapter entirely. This one has 19 pages of safety regulations. Aftermarket manuals guess the torque values. This one comes from Dieci S.r.l. directly. The service and spare parts department contact info is printed on page 3 – you can call Italy if you need a part number. That’s the level of detail you pay for.

Related manuals for other Dieci models: Dieci Pegasus 40.25 2011 Operators Manual – Factory Specs & Safety, Dieci AXH 1107 Operators Manual – Factory Specs & Safety Guide, Dieci AXH1149 Operators Manual – Factory Specs & Safety. For background on how a manual transmission works in these telehandlers, check Manual Transmission on Wikipedia. Same for the driveline basics Manual Transmission.

Is this manual in Imperial or Metric units?

Metric. The Agri Plus is built in Italy, so all torque specs and fluid capacities are in Nm and liters. You will need a metric torque wrench or a conversion table.

Can I use this manual for maintenance on other Dieci telehandlers like the Pegasus or AXH series?

Some general safety and operation principles are similar, but each model has its own unique hydraulic schematics, load charts, and identification data. The Agri Plus manual only covers the Agri Plus specifically. For the Pegasus 40.25, you need the Pegasus manual; for the AXH 1107, the AXH manual. Using the wrong manual can lead to incorrect torque values or missing safety warnings. That is why we carry separate operators manuals for each model.

You’re not here to guess your way through a machine that could kill someone if a fork drops. You’re here to get the factory document that every operator should have strapped to the cab. Access the Factory Manual now and put the real specs on your workbench.