Description

Deutz Fahr HMW 1132 Parts Catalog – What You Need on the Bench

I’ve spent enough years chasing the wrong part number because some aftermarket drawing had the bolt in the wrong hole. If you’re working on a Deutz Fahr HMW 1132 and need to order parts for the cutting table or feeding elevator, you want the factory Parts Catalog, not a third-party approximation. This is the real thing – 75 pages of exploded views, reference numbers, and OEM part callouts that match what Deutz Fahr stamped on the casting. No guessing allowed.

What’s Inside the HMW 1132 Parts Catalog

This catalog breaks down the entire cutting table and feeding elevator assembly. You get the AUTOCONTROL system, table trolley, safety labels, V-belts and chains, guards, main drive with P.T.O. shaft, and the cutting table chassis. There’s coverage for the double bottom type 1124 = W, regulating disc gearbox knife drive, gearbox knife drive, cutter bar with knife guard, conveyor screw, and multiple intake auger configurations from 3.00 m up to 9.00 m. Every section lists the exact part numbers – no generic descriptions.

Cutting Table and Feeding Elevator Breakdown

The reel section covers reel support, bearings (part numbers -36052 and +36053), reel friction clutch, speed variator, and the automatic adaptation of reel revolutions to driving speed. For the hydraulic side, you get vertical and horizontal adjustment diagrams, hydraulic cylinder positions left and right, and the quick-coupling device TOPLINER. If you’ve ever tried to order a reel cylinder without knowing the exact left-hand vs right-hand variant, you’ll appreciate that this catalog separates them. Page references in the PDF match the original factory layout – look for 4P.31.30 for the intake auger friction clutch, and 4P.33.2 for reel bearing -36052.

How This Manual Saves You Time

Instead of pulling a part, measuring it, and hoping the aftermarket book has it right, you open this catalog, find the exploded view for your specific machine variant, and order the factory number. The HMW 1132 has multiple configurations – intake augers differ by length, cutter bar options change with serial numbers. This catalog cross-references them so you don’t waste a day on the wrong gasket or belt. For a DIY mechanic or a shop owner, that means the job goes faster and you don’t have the customer’s combine sitting dead while you wait for a return.

OEM vs Aftermarket Parts Catalogs

I’ve seen aftermarket parts lists that swap two similar-looking bearings and call it a day. That kind of shortcut costs you downtime when the bearing fails at 1,500 rpm. This catalog is a direct scan of the original Deutz Fahr documentation – same part numbers, same exploded views, same layout. No reprints, no third-party editing. If you need to cross-reference with other models, check the FAHR HD 300 Parts List or the Deutz Fahr Raps Parts Catalog (Cutting Table). For a broader look at the M2680 series, see the Deutz Fahr M2680 Parts Catalog Index.

Why 75 Pages Matter

75 pages of organized part data covers everything from the table trolley to the reel hydraulic cylinders. That’s not fluff – it’s the difference between having a drawing that shows the exact orientation of a bearing retainer versus a vague line drawing. The catalog uses the factory’s own numbering system (like 4P.30.1 for autocontrol) so you can talk to a Deutz Fahr dealer and give them the right reference the first time. For the broader context of agricultural machinery documentation, you can also read the Automotive Industry Overview for background on OEM standards, or the Automotive Industry Overview for general manufacturing practices – but for this combine, the factory catalog is the only source that matters.

FAQ – Common Questions About the HMW 1132 Parts Catalog

Does this catalog cover the engine or transmission?

No. This Parts Catalog only covers the cutting table and feeding elevator assemblies.

Are torque specifications included in this manual?

This is a parts catalog, not a service manual. It contains exploded views and part numbers but does not list torque specs, fluid capacities, or repair procedures. You need the separate service manual for those values.

Can I find part numbers for the reel hydraulic cylinders in here?

Yes. The reel hydraulic equipment section (4P.34.1 through 4P.34.6) includes vertical and horizontal adjustment diagrams, hydraulic cylinder part numbers for left and right sides, and the quick-coupling device. All part numbers are factory-original.

Is the manual in English?

Yes. The original factory document is in English, with clear part descriptions and index references. No translation errors.

Access the Factory Manual now and keep it in your tablet or print it for the workbench. You’ll save hours sourcing the exact part the first time.