Description

Cub Cadet 431 Parts Catalog – 74 Pages of Factory OEM Parts Breakdown

I’ve seen too many Saturday afternoons wasted because a guy ordered a “close enough” part from an online listing that didn’t match. You pull the old air cleaner base off your Cub Cadet 431, and the new one has a different bolt pattern. That’s not a parts problem – that’s a documentation problem. This Cub Cadet 431 Parts Catalog is 74 pages of factory-sourced exploded views and OEM part numbers. No reprints, no generic cross-references. You get the same diagrams the dealer uses to pull parts off the shelf.

Air Intake/Filtration System Breakdown (Page 1–2)

Your 431 4×2 Utility Vehicle (Camo) (37AB431D710) has a Kohler engine, and the intake tract is specific. Page 2 lists every component from the air cleaner cover kit (KH-24-743-08, includes knob, seal, and cover) down to the intake manifold gasket (KH-24-041-53-S). The diagram shows the precleaner (KH-24-083-02) and element (KH-47-083-03) as separate service items – because you don’t replace the whole housing when the element gets dirty. I’ve seen guys buy a complete intake assembly when all they needed was a $4 seal. That stops with this catalog.

Cables Assembly for SN 1A107B & After (Page 3–4)

Throttle, choke, and brake cables – if you’re chasing a sticky throttle or a brake that won’t release, the exploded view on page 4 is your map. Note the footnote: this section applies to units with serial number 1A107B and after. The part numbers are exact: control cable brake (746-04072A), choke cable (746-04201), throttle cable (746-04202). Each reference includes quantity and whether it’s a serviceable item (S), a part (P), or a fast-moving item (/P). You can see the clevis pins, cotter pins, and jam nuts – all with thread sizes. No guesswork.

Why 74 Pages of Factory Data Beats Aftermarket Diagrams

Aftermarket parts catalogs are often scanned from worn-out originals, with missing revision notes or blurred callouts. This PDF came from the same print run the dealerships used. The part numbers start with prefix codes (KH- for Kohler, 7xx- for Cub Cadet chassis components) so you know the source. Every fastener is listed: hex flange screws M6x1.0x16, M5x0.8×10, and the shoulder screw 710-04027 for the brake arm plate. When you call the phone number on page 1 (606-678-9623) for a part, you can read them the exact reference number from the page – not a description you made up.

If you own a similar machine, check the Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs if your model needs different diagrams. For larger utility vehicles, the Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns might be what you need.

Who Needs This Catalog – and Who Should Pass

If you’re rebuilding a Cub Cadet 431 that’s missing half its hardware or has been parked in a barn for ten years, this catalog is the difference between matching bolts on the second trip to the supply house and ordering once. The air cleaner base gasket (KH-24-041-06) and the intake manifold O-ring (KH-24-153-27-S) are both listed – two cheap parts that cause lean-running conditions if they’re torn. Beginners: you don’t need to know the Kohler engine serial number; the catalog is keyed to the Cub Cadet model and serial break. Professionals: you can quote repair estimates straight from the exploded views. The only people who don’t need this are those who like buying the same part twice.

How to Verify Your Cub Cadet 431 Model and Serial Number

The camo version (37AB431D710) is covered, along with other 431 variants. Your serial number tells you which cable revision you have (page 3 is for SN 1A107B & after). If your machine is older, some part numbers may differ – but the air intake section is universal for all 431 Kohler-powered units. The Cub Cadet 431 Parts Catalog is the reference you want for that machine.

Does this catalog include exploded views for every system?

The PDF covers air intake/filtration and cables sections in full detail – 74 pages with part number callouts. Other systems (like the drivetrain or body panels) are not in this specific catalog; it focuses on the engine-related parts and control cables. If you need a complete chassis breakdown, you’ll want the full service manual. For the parts you see here, every nut, bolt, and seal is diagrammed.

Are the Kohler parts listed with genuine OEM numbers?

Yes. All Kohler items have the KH- prefix. For example, the air cleaner element is KH-47-083-03. You can order that directly from any Kohler dealer. The catalog also shows the Cub Cadet chassis parts (7xx- numbers) for components like the brake cable bracket. No cross-references – these are the numbers cast into the parts.

Can I find the brake cable assembly parts for my 431?

Page 4 lists the brake cable for 4×2 (746-04124), the control cable brake (746-04072A), and every clevis pin, cotter pin, and spring. If your serial number is 1A107B or later, this is your diagram. Older units may differ – check the plate on your firewall.

What if my serial number is older than 1A107B?

The cables section specifically states SN 1A107B & after. If your machine is older, call Cub Cadet with the serial – they can tell you if the earlier cable set is still available or if superseded to this revision. The rest of the catalog (air intake) applies regardless of serial.

You’re not guessing anymore. You’re ordering the exact screw (KH-24-086-53-S, M6x1.0x16, hex flange) that holds the air cleaner bracket, not a bin full of bolts that sort-of fit. Factory parts catalogs don’t waste your time. Automotive Industry Overview shows why OEM documentation matters in any mechanical field – precision eliminates rework. Access the Factory Manual and put the right part number in your hand the first time.