Cub Cadet 1210 Parts Catalog – OEM Part Numbers & Exploded Views
Original price was: $19.65.$15.00Current price is: $15.00.
86-page OEM parts catalog for Cub Cadet 1210. Exploded views, factory part numbers, and hardware identification. Eliminates cross-referencing errors.
Description
Cub Cadet 1210 Parts Catalog – 86 Pages of Factory Parts Breakdown

If you own a Cub Cadet 1210, the biggest waste of time is ordering a gasket, a screw, or a bracket that doesn’t fit. Then you’re waiting another week for the right part while the mower sits. That’s the kind of idiocy this catalog stops. 86 pages of OEM exploded views and factory part numbers – not reprints, not aftermarket guesswork. Every part listed matches the serial number range 756,300 through 799,999. I’ve been wrenching since before some of you were born, and I can tell you: if you don’t have the factory parts breakdown, you’re gambling with your money and your downtime.
Air Intake Assembly – Page 2 Breakdown
Page 2 shows the air intake system with nine numbered items. You’ll see part numbers like KH-X-276-7 (wing nut, 1/4-20) and KH-47-082-01 (air cleaner cover). That cover seal (KH-47-032-03) is a common failure point – dirt bypasses it and scores the cylinder. The catalog lists the seal as a service part (S/P flag). You order it by that number, not by eyeballing a diagram on some generic site. The element (KH-47-083-01) is also flagged as service – replace it every season or after heavy dust. Without this catalog, you’d be guessing at filter dimensions.
Baffles & Shroud – Cooling System Parts
Overheating a 12-horse Kohler? Usually a missing baffle or a shredded shroud. Pages 3–4 cover the Baffles & Shroud section. Thirteen parts including the blower housing (KH-47-027-40) and a duct kit (KH-47-755-33) that includes three screws. That side air baffle (KH-47-063-06) directs airflow across the cylinder – leave it off and you’ll warp a valve seat. The catalog lists plain washers (KH-X-25-53) and Pozidriv screws (KH-47-086-08) with exact thread – 1/4-20 x 1/2. You don’t have to measure anything. You call 606-678-9623 (the number printed on every page) and read the part number.
Brakes & Connections – What You Need
Page 5 opens the Brakes & Connections section. Twenty-two reference numbers on a single exploded view. That’s your brake linkage, cables, springs, and mounting hardware. The catalog doesn’t show torque values – it’s a parts catalog, not a service manual – but it does show every bracket, pin, and retaining ring. If your 1210 won’t stop or pulls hard to one side, you pull this page, identify the broken piece by its reference number, and order the factory number. No cross-referencing to aftermarket junk that’s close enough to fail. Close enough gets people hurt.
Serial Number Range: Why It Matters
This catalog is explicitly for Cub Cadet 1210 tractors with serial numbers 756,300 through 799,999. Cub Cadet changed parts mid-production. A 1985 1210 might use a different air cleaner base than a 1987. The catalog header on every page repeats the S/N range. If your 1210 falls outside that range, you need the later catalog. That’s why we stock the full lineup – Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs and Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns cover different production batches. Also check Cub Cadet 81, 21121C290248 Parts Catalog – OEM Factory Breakdown if you have an 81-series. Never order parts without matching your serial number.
Factory Parts Numbers vs Aftermarket Cross-Reference
I’ve seen aftermarket catalogs swap a 10-32 screw for a 1/4-20 because they think it’s close enough. That air horn gasket (KH-45-041-07) on page 2 is an example – aftermarket lists show a generic gasket that doesn’t seal the intake runner. The OEM part costs a few bucks more and lasts ten years. This catalog gives you the KH- prefix Kohler numbers. You can verify them against Kohler’s own database. That’s factory accountability. No third-party rewrites. For more on why OEM documentation matters across the industry, read the Automotive Industry Overview – the same principle applies to lawn equipment.
How to Use This Catalog on the Bench
Lay the exploded view next to your disassembled tractor. Match the reference numbers to the parts in front of you. Circle the ones that are worn or missing. Write the part numbers on a sticky note. Call your dealer or look them up online. That’s it. The catalog has 86 pages of these assemblies – from the air intake to the brakes. Every page from 1 to 86 is the same format: reference number, part number, description, quantity, and a service/parts/factory flag. If the part is marked S (service) or /P (parts), it’s available individually. The flags tell you whether you’re buying a screw or an entire kit. No confusion.
FAQ
- Does this catalog include torque specs or repair instructions?
- No. This is a parts catalog, not a service manual. It gives you exploded views and part numbers so you can order the correct pieces. For torque values and assembly procedures, you need the factory service manual for the Kohler engine and the Cub Cadet chassis.
- My 1210 serial number is 800,100 – will this catalog work?
- No. This catalog covers 756,300 through 799,999. Cub Cadet changed parts at the 800,000 break. Order the catalog for your S/N range to avoid buying the wrong brake linkage or intake tube.
- Is this a reprint or a copy?
- It is a direct scan of the original factory parts catalog. The pages show the original part numbers, the original diagram quality, and the dealer contact numbers printed at the bottom (606-678-9623). No retypes, no redrawn diagrams.
- Can I use this to fix a different Cub Cadet model?
- Maybe a few parts cross – like generic hardware or common filters – but the specific engine shrouds, baffles, and brake parts are unique to the 1210. Buy the catalog for your exact model. Using the wrong diagram wastes time and money.
You’ve got a Cub Cadet 1210 sitting in your shop with a torn air filter base, a missing baffle, or a brake cable that snapped. You can call around and hope someone has the right part, or you can open this catalog, find the exact factory number, and order it in five minutes. Access the Factory Manual now – it’s an 86-page PDF you can print or keep on your tablet. No fluff, no reprints, just the factory breakdowns that keep your equipment running.
Additional information
| Brand | Cub Cadet |
|---|---|
| Language | English |
2 reviews for Cub Cadet 1210 Parts Catalog – OEM Part Numbers & Exploded Views
You may also like…
-
Sale!

Cub Cadet 364 Parts Catalog – 43 Pages of OEM Exploded Views and Part Numbers
Original price was: $33.88.$28.00Current price is: $28.00. -
Sale!

Cub Cadet 7200 Parts Catalog – OEM Exploded Views & Part Numbers
Original price was: $36.75.$25.00Current price is: $25.00. -
Sale!

Cub Cadet 76 Parts Catalog – 60 Pages of OEM Part Numbers
Original price was: $39.42.$27.00Current price is: $27.00. -
Sale!

Cub Cadet 1912, 2112 1912 Parts Catalog – OEM Exploded Views
Original price was: $35.09.$29.00Current price is: $29.00.




Robert M. –
I am very pleased with this purchase. The document quality is excellent. Contains detailed wiring diagrams for Cub Cadet. Worth every penny.
Charles W. –
Great buy! The scan is high-quality and easy to navigate. Contains detailed schematics for Cub Cadet. Saves me so much money.