Description

CNH 340 2006 Parts Catalog – Factory Specs for Tier 3 Articulated Dump Trucks

You’ve got a 340 in the bay with a blown cooling line, and the parts counter hands you a part that looks right but won’t seat. Or worse, you order online from a generic catalog and get a bearing that’s 0.010” off. That’s the difference between OEM data and aftermarket copies. The CNH 340 2006 Parts Catalog is the only document that gives you factory part numbers, exploded views, and revision history straight from CNH America, LLC. 606 pages of stuff that actually matches the machine in your shop.

606 Pages of Factory Part Numbers

This catalog runs 606 pages. That’s not padding — that’s every fastener, gasket, hose, and sensor broken down by system. The table of contents starts with a COMPONENT INDEX at section 00A00000000, then jumps straight into ENGINE. Under engine alone you get movers, crankcase, lubrication, air compressor, wirings, cooling, covers, injector, electronic injection, timing, engine brake, starting, generator, alternator, heat — 29 subsections. Each one has a CNH part number and illustration. No fluff, no third-party guesses.

What Does the Engine Section Actually Cover?

Open to section 01A0000096 and you’re inside the engine. Specific subsections include ENGINE – CRANKCASE (01A0000246), ENGINE – LUBRIFICATION SYSTEM (01A0000247), and ENGINE – COOLING SYSTEM (01A0000253). The cooling system is covered again under 01A10000162, 01A17000162, 01A20000162, 01A21010162. You also get ENGINE – FUEL INJECTION (01A11000160), ENGINE – TURBOCHARGER (01A07010167), and ENGINE – CYLINDER HEAD (01A06010155). If you’re chasing an oil leak on a 340, you need the crankcase seal part number — it’s in there. Need an injector? Look under 01A0000290 ENGINE – INJECTOR or 01A12010160 ENGINE – FUEL INJECTION. Everything ties back to the 2006 Tier 3 build.

Cooling System Breakdown

Cooling on these trucks gets abused — sand, mud, high ambient heat in San Antonio. The catalog lists every component: radiator installation (04A00000634), pipelines (04A00000635), and all the related engine cooling parts. Page references aren’t printed on every line, but the section codes guide you to the exact illustration. You won’t be guessing which fan belt or water pump fits. These are the same parts CNH used at the factory in Racine, WI. No aftermarket catalog can match that accuracy.

Why OEM Parts Data Matters More Than Aftermarket Copies

I’ve seen a kid try to fit a Chinese-sourced water pump off a generic site because “it looks the same.” Then the truck overheats at 2,000 ft-lb load. The CNH 340 2006 Parts Catalog is the original issue from CNH America, LLC — copyright 2006, first edition, printed in U.S.A., book number 87560085 NA. The revision history tells you exactly when it was issued and for which machines. This isn’t a reprint or a scan from a third party. Automotive Industry Overview is a broad subject, but for specific parts data, you need a factory document.

Real-World Use: Ordering the Right Injector for a 340

You’re in the field with a 340 that has a dead cylinder. You pull the injector, but the numbers are rubbed off. Your phone can’t find a match. With this parts catalog, you cross-reference the engine serial to the ENGINE – INJECTOR section (01A0000290). You get the original CNH part number. You call your dealer, read it off, and the part arrives the next day. That’s what 606 pages of verified data does for you. Also check CNH E30BSR 2007 Parts Catalog – Factory Specs for Compact Excavator if you run a mixed fleet, or CNH 580 SUPER M, 580 SUPER M+ 2005 Parts Catalog – Factory OEM Specs for backhoes. CNH 580M Series 3 2008 Parts Catalog – Factory OEM Specs is another solid reference.

Does this catalog include torque specs or repair procedures?

No. This is a parts catalog only – no torque values, no step-by-step disassembly. You need the separate service manual for that.

Can I use this to order parts for a 340 with a different engine variant?

Check the revision history on page 2. The catalog applies to 340 Tier 3 machines built through 09-2006. If your truck has a later engine serial or aftermarket modifications, cross-reference the component index section 00A00000000 to verify the part group. The catalog lists every CNH factory configuration for that production window, but aftermarket mods won’t appear. Always verify with your dealer if the serial number range doesn’t match. This is the same document dealers pulled from in 2006 — no updates for later field changes.

Stop losing billable hours on wrong parts. The CNH 340 2006 Parts Catalog puts factory illustrations and part numbers in your hands. Access the Factory Manual from AutoRepairManuals and get back to turning wrenches.