Description

CNH 580M Series 3 2008 Parts Catalog – Factory Part Numbers, Not Guessing

Look, I’ve been wrenching on heavy equipment for 28 years. Nothing burns my time faster than a parts guy reading an aftermarket catalog that lists a different gasket than what came off the machine. This CNH 580M Series 3 2008 Parts Catalog is the only book that tells you exactly what CNH bolted on at the factory. You want the correct radiator mounting bracket? It’s in section 02-01. Need the right water separator filter element? Section 03-01A. This isn’t a generic repair guide – it’s a parts bible for the loader backhoe that left the Racine plant in 2008.

Page 2 shows the revision history: first edition, issued 01Jul08. That means every part number in here matches the machines that rolled out that year. If you’re rebuilding a Cylinder head or replacing a Valve mechanism, the exploded diagram in section 02-18 is your map. Aftermarket catalogs skip sections like “DYNAMIC BALANCER, GEARS & SHAFTS” (02-26) because they don’t know it exists. This book covers it.

Cylinder Block and Valve Mechanism Coverage

Two full sections dedicated to the Cylinder block (02-09 and 02-10). That’s not a typo – CNH split them so you get separate views for block casting and block hardware. Section 02-16 covers the cylinder head itself, and 02-18 gets into the Valve mechanism – keepers, springs, retainers. If you’re ordering a valve stem seal for this Engine, you pull the diagram from 02-18 and hand the number to your dealer. No cross-referencing, no “this might fit.”

Fuel System Parts: Injection Pump to Water Separator

Sections 03-04 through 03-09 cover the fuel injection pump, injection system piping, and the fuel filter. The water separator filter is broken out into two sub-sections (03-01A and 03-01B) because CNH used different suppliers over the production run. This catalog gives you the exact filter head gasket and element – not a universal replacement that leaks on the third start. Page 3 lists the full table of contents so you know exactly where each subsystem lives.

3 Sections You Can’t Skip in a Parts Catalog

Most people flip straight to the engine and miss the small stuff that stops a job. Section 02-07A covers the block heater – critical if you’re working north of San Antonio in winter. Section 02-34 lists the heat exchanger parts, and 02-38 goes into water pump control components. Overlook any of those and you’ll be waiting a week for a $12 thermostat housing. This catalog has 792 pages – don’t treat it like a coffee table book.

Does This Catalog Cover the Engine Mounting?

Section 02-07 is the full engine mounting group – brackets, isolators, bolts. If you’re swapping a motor, you need the exact bolt length and grade. The catalog won’t give you torque specs (that’s what the service manual is for), but it will give you the part number so you can order the correct CNH fastener instead of grabbing something from the bin that strips out.

Why OEM Factory Documentation Matters

I’ve lost count of how many aftermarket catalogs show a part that “supersedes to” something that doesn’t bolt up. CNH America, LLC printed this in Racine, WI. The page 2 legal text says “all data subject to production variations” – they’re covering themselves, but the illustrations and numbers are factory-correct. Compare that to a third-party scan that re-compresses the images until you can’t read the reference numbers. This is the original OCR PDF, clear enough to zoom on a tablet next to the machine. For related equipment, see the CNH E30BSR 2007 Parts Catalog – Factory Specs for Compact Excavator or the CNH 580 SUPER M, 580 SUPER M+ 2005 Parts Catalog – Factory OEM Specs. For a smaller machine, the CNH 340 2006 Parts Catalog rounds out the line. Automotive Industry Overview doesn’t help you here – stick to the factory book.

Is this catalog specific to the 2008 model year?

Yes. Issued 01Jul08 for 580M Series 3. Earlier years use different part numbers.

Can I use this to order parts for a 580 Super M?

No – the 580 Super M and 580 Super M+ from 2005 have different cylinder head, valve train, and fuel injection pump assemblies. The 580M Series 3 introduced changes to the engine mounting, radiator, and deaeration system. Ordering from this catalog for an older machine will get you parts that don’t fit. Use the dedicated 2005 catalog for the Super M line.

You’ve got a machine that needs parts – don’t waste billable hours chasing wrong numbers. Access the Factory Manual and get the exact CNH part the first time.