Description

CASE IH 527 1999 Parts Catalog

If you’ve ever spent an afternoon trying to match a part number from a third-party catalog to your 527 combine, you know the frustration. I’ve seen techs order the wrong finger bar because the aftermarket drawing looked close but wasn’t. This 1999 Parts Catalog from CASE IH 527 1999 Parts Catalog fixes that—it’s the same book the dealer parts counter uses. 337 pages, three languages, and every part number verified by the factory.

What This Parts Catalog Covers for the 527 Combine

This catalog is specific to the 527 model built from January 1999 through December 1999. It breaks down the entire machine into sections: header, feeder house, threshing, cleaning, engine, electrical, and more. Each section uses exploded-view drawings with reference numbers that point directly to the part number, quantity, and description. The catalog is organized by assembly—so if you need the trough, finger bar, and knife assembly, you turn to section 005. Page 4 in that section lists every component from double guide fingers to slide soles, with quantities for the 5.4m, 6.0m, and 6.6m header widths. That means you don’t guess which bolt goes where. The part number is right there.

Page 4: Trough, Finger Bar, Knife – HLS Section

I want you to see the level of detail. On page 4 you’ve got part numbers like 060531001 for a double guide finger, 4260714174 for the double finger (available in three lengths), 061035517 for slide soles, even the specific screws and locking washers. The catalog lists not just the part number but the exact quantity per machine configuration. If you’re rebuilding a 6.0m header, you know you need 16 fillister-head screws (060528754) and 16 locking washers (9999853117). No assumptions. No “this looks close.” That’s the difference between a factory OEM catalog and a generic aftermarket list.

Why Factory Part Numbers Beat Aftermarket Guesswork

Aftermarket parts catalogs love to group multiple supersessions into one line. They’ll tell you a part “fits” 527 combines when it may only fit one production run. This book comes straight from CASE IH’s 1999 database. Every number was current the day the manual was printed. If a part was superseded later, you still have the original reference to cross-check with your dealer. I’ve seen shops tie up a combine for three days because the wrong ledger plate showed up. Spend the hour looking up the right number here, and you’re done. That’s real time saved.

Using the Exploded Views and Part Number Index

Each drawing includes reference numbers that correspond to a table. The table gives you: reference, part number, quantity, description, and often a note for specific header width or option. The index at the back (if present) lets you search by part number to find where it appears. But most of the time you drill in by assembly. Start with your machine’s manual, identify the assembly (e.g., header), find the drawing, and read the part numbers. The catalog also lists nuts, bolts, and washers that are easy to overlook. If you order a finger bar without the correct locking plate, you’re going back to the dealer.

Audience Fit: Farmers, Mechanics, and Equipment Owners

This book is for anyone who keeps a 527 combine running. If you’re a DIY owner-operator, you need this catalog to order parts from your local CNH dealer without getting talked into expensive assemblies. If you run a shop, this catalog goes on the shelf alongside CASE IH 7210, 7220 Parts Catalog – Factory Specs and CASE IH JX 70U, MX 80C, 90C, 100C, MX 100 Parts Catalog so your techs don’t waste billable hours chasing the wrong part. And if you’re restoring a 527, this is the only book that tells you what was originally installed.

Source Validity: OEM Case Corporation Print, 1999

This is not a scanned photocopy of a dog-eared copy. The PDF was produced from the original Case Corporation print, issued July 1999, with copyright by Case Corporation. It includes the same content as the dealer network used in 1999. The file name is CaseIH_527_1999_Parts_Catalog_en-ru-de-18114013813.pdf. Three languages (English, Russian, German) are included because CASE IH sold these machines globally, but the English section is what matters for North America. I trust this because it has the factory layout—section numbers, reference numbers, no guesswork. Compare that to a third-party catalog that lists “Finger, double” without telling you the 5.4m uses 35 pieces while the 6.0m uses 40. The difference is in the details.

For broader context on why OEM documentation matters in heavy equipment, see the Automotive Industry Overview. The engineering behind these part numbers follows design principles discussed in Internal Combustion Engine standards. But for the 527 combine, this manual is the only reference you need.

Frequently Asked Questions

How many pages is this Parts Catalog?

337 pages.

Does this catalog include service procedures or only parts?

Only parts. This is strictly a parts catalog with exploded diagrams and part numbers. For repair procedures, you need the service manual. But if you are ordering replacements, this is the only book that guarantees you get the right part the first time without cross-referencing. I keep both on my shelf: the service manual for how to take it apart, and this catalog for what to put back in.

Are the part numbers still current for a 1999 model?

Part numbers are original 1999. Case may have supersessions, but this gives you the base number to verify with a dealer.

What languages is the catalog in?

English, Russian, German.

Also check out CASE IH STEIGER 385, STEIGER 435 Parts Catalog – Factory OEM Manual if you work on larger tractors. For the 527 combine, this 337-page Parts Catalog is your one reference. Stop ordering the wrong parts because an aftermarket catalog didn’t list the variant. Access the Factory Manual and get the numbers that match your machine.