Description

Case 586H, 588H 2012 Operators Manual – Factory Specs for Rough Terrain Forklift

Working on a rough terrain forklift without the factory operator’s manual is asking for a broken driveline or a citation from OSHA. I’ve seen guys guess at control layouts and end up dropping a load. This Case 586H, 588H 2012 Operators Manual is the real document – not a reprint, not a scanned copy of a copy. It’s the same 230-page booklet that came with the machine from the factory, Part number 84587658, first edition English July 2012. You get every safety rule, every control position, every fluid capacity that Case wrote for the Tier 4 models from PIN NCC570000. If you’re running a 586H or 588H and you don’t have this, you’re working blind.

Controls and Instruments: Factory Layout for 586H and 588H

Chapter 3 of the manual – CONTROLS/INSTRUMENTS – gives you the exact location and function of every lever, pedal, switch, and gauge. No guesswork about which button locks the differential or how the auxiliary hydraulic controls work. The manual also includes component identification diagrams starting on page 1-5, which match the actual layout of the cab. If you’ve ever wasted time trying to find the parking brake release on a rental unit, you’ll appreciate having this pinned to the dash. The machine uses a powershift transmission with a torque converter – not a Manual Transmission, but the shift pattern and neutral start interlock are explained in detail. Understanding those controls before you move the machine is how you avoid crunching a gear.

Safety Information: 16 Pages of Specific Rules

Safety chapter 2 runs from page 2-1 to 2-16 and covers California Proposition 65 warnings, electrical storm precautions, battery handling, fire and explosion prevention, fuel handling, lifting and overhead loads, general maintenance safety, mounting and dismounting, operator precautions, specific precautions to this machine, transporting, utility work, wheels and tires, and ROPS. That’s not generic boilerplate – each section addresses the unique hazards of a rough terrain forklift. For example, the tire and wheel safety section (page 2-16) tells you the correct inflation procedures for the 12-16.5 and 14-17.5 tires. If you inflate a split rim without the cage procedure outlined here, you’re risking a catastrophic blast. The manual also includes the Do Not Operate hang tag template (page 2-2) – photocopy it and use it.

Operating Instructions: Tier 4 Compliance and Daily Checks

Chapter 4 (OPERATING INSTRUCTIONS) walks through engine start procedure, cold weather operation, emergency shutdown, and the daily walk-around inspection. For a Tier 4 machine, you need to know the regeneration cycle for the diesel particulate filter – the manual covers that in plain language, not engineering jargon. It also tells you how to read the diagnostic lamps on the instrument cluster. If the exhaust after-treatment light comes on, you don’t guess; you follow the sequence on page 4-12. That kind of detail keeps you from calling a service truck for something you can clear yourself. The manual also specifies the correct engine oil (CJ-4 or CK-4, 15W-40 above 0°F) and the capacity – 13 quarts with filter change. That’s data you verify before you open a jug of oil.

Maintenance Schedule and Specifications: 230 Pages of Factory Data

Chapter 7 (MAINTENANCE) and Chapter 8 (SPECIFICATIONS) are the spine of this manual. The maintenance schedule breaks down hourly intervals – every 10, 50, 250, 500, 1000, and 2000 hours – with the exact service action required. You get the correct grease points (16 total, including the steering cylinder pins and the mast carriage), fluid types, and filter part numbers. Need the charge pressure for the transmission? It’s listed in Chapter 8 alongside the tire sizes, axle capacities, and mast lifting speeds. The specification table on page 8-5 gives the overall machine dimensions, weight (with standard mast), and turning radius. If you’re ordering replacement parts or modifying the machine, that information is critical. And because this is the OEM document, you can trust those numbers – they came from Case Engineering, not a third-party writer guessing from a blurry photo.

Why OEM Documentation Beats Aftermarket Reprints

I’ve seen aftermarket “operator manuals” that claim to cover the 586H and 588H but skip the EGR exhaust treatment section (page 1-11) or omit the specific precautions for lifting and overhead loads. Those omissions can get you dead. This manual is the original – scanned from the Case factory print, not a reprint of a copy that’s been through a fax machine. The page numbers match the hardcover book. The torque values for the wheel nuts (500 lb-ft, dry, tightened in a star pattern) come from the same source as the dealer’s service bay. If you’re a shop owner or a fleet mechanic, buying the OEM document saves you from liability when a technician follows the wrong procedure. And for the home garage guy, it’s the difference between getting the job done right and having to buy a new transmission because you missed a step.

Other related factory manuals you might need for your Case fleet include the Case SL1-b, SL2 1995 Operators Manual – Factory Specs for older machines, or the Case SV212, SV216, SV208, SV210, SV223 Operators Manual – 214 Pages for compact utility tractors. If you work on the 1994 models of SV212 and SV216, grab the Case SV212 SV216 1994 Operators Manual – Factory Specs. Those are the same level of OEM accuracy – no generic aftermarket garbage. And if you need to understand the difference between manual and power shift transmissions, check the Manual Transmission article on Wikipedia for a quick refresher on clutch vs. torque-converter operation.

Frequently Asked Questions

Does this manual cover both the 586H and 588H models?

Yes. One manual covers both models – 586H and 588H – from PIN NCC570000. The differences between the two (mainly mast height and capacity) are noted in the text.

Is this the same as the dealer operator manual?

Identical. Part number 84587658, 1st edition English July 2012. Same page count, same content. No abridgments, no reprints. When you access it, you get the exact PDF that Case shipped with the machine.

Does it include torque specs for wheels and fasteners?

Chapter 8 (Specifications) lists wheel nut torque at 500 lb-ft dry, tightening sequence star pattern. It also gives hydraulic fitting torque values for the main pump lines. But this is an operator manual, not a service manual – it does not contain engine internal torque specs or transmission rebuild data. For repair procedures, you need the separate service manual.

I have a 2013 model – will this manual still work?

The manual covers Tier 4 machines produced from mid-2012 onward through the 2013 model year. Check your PIN – if it starts with NCC570000 or later, this manual applies. If you have a Tier 4 Final machine with a different emissions system, look for a later edition.

You need this manual on the workbench – not in a dusty file cabinet, but open to the page you’re working on. The controls chapter will cut your familiarization time in half. The safety chapter could save a hand or a life. The maintenance schedule keeps the machine running without guesswork. Access the Factory Manual now and get the OEM data you’re missing.