Description

Case 580M 2008 Parts Catalog

Wrenching on a Case 580M loader backhoe and chasing a part number? If you’re using a third-party website or a greasy photocopy from the last guy, you’re wasting time and risking a comeback. Twenty-eight years in this trade taught me one thing: the aftermarket parts lists are fine for a ballpark, but when you need the exact piston ring for a cylinder head rebuild, you want the real document. This is the 2008 Case 580M Series 3 Parts Catalog – 2370 pages of factory part numbers, exploded diagrams, and assembly breakdowns. Published by CNH America, LLC, issued 01Mar08, book form number 87632283 NA. This is the same catalog the Case dealer pulls up when you call the parts counter. No aftermarket renumbering, no ambiguous cross-references.

Engine Section: Cylinder Block and Head Subassemblies

Section 2 of this catalog covers the engine from front to back. Cylinder block pages (02-09 through 02-10) show every bore, every plug, every dowel pin. Need a connecting rod? That’s 02-22. Piston? 02-23. Cylinder head assembly is 02-16 through 02-18, including valve mechanism. The exploded diagrams are indexed with reference numbers that tie directly to the parts list. No guessing which piston ring set fits the 580M – it’s all there, with the factory part number and quantity. There are also sections for the oil pump (02-31), oil filters (02-32), piping (02-33), heat exchanger (02-34), water pump (02-35), cooling system (02-36), thermostat (02-37), water pump control (02-38), fan drive (02-39), engine lift hook (02-41), and alternator mounting (02-42). If you’re rebuilding the entire engine, this catalog gives you every single fastener and seal part number. Don’t miss the dynamic balancer, gears, and shafts at 02-26, or the camshaft at 02-28. The turbocharger section (02-29) includes all the oil lines and mounting brackets. This level of detail is not available in any aftermarket printout. For the complete engine breakdown, see the 580M Series 3 Parts Catalog.

Does This Parts Catalog Include Wiring and Electrical Diagrams?

A parts catalog shows the physical components – starter (04-01), alternator (04-02), harness assemblies (04-04 for engine harness). You’ll see the mounting and connections in exploded view, but this is not a wiring schematic. If you need wire colors and pinouts, you want the service manual. What this gives you is the correct part number for the starter, the alternator, the battery cables, and the harness clips. Handy when you’re replacing a corroded harness on a 2008 machine. The electrical components are detailed in this 580M Series 3 Parts Catalog.

7 Major Sections Covered – From Engine to Chassis

The table of contents splits the machine into seven main groups: Engine (Section 2), Fuel System (3), Electrical System (4), Steering (5), Powertrain (6), Brakes (7), Hydraulics (8), and Chassis/Attachments (9). Over 2,300 pages of part breakdowns. Each section has its own subsections – for example, Section 6 Powertrain covers transmission assembly, axles, drive shafts, and planetary gears. Need a front axle ring and pinion? Subsection 06-08. Every component is broken down to the nut and bolt level.

Use the Right Part Number the First Time

When a customer brings in a 580M with a blown engine, you don’t have time to cross-reference aftermarket catalogs. This OEM parts catalog lists every single component in the engine assembly – cylinder block, oil pump, crankshaft, camshaft, turbocharger (02-29), water pump (02-35), and fan drive (02-39). The exploded views show you how it all goes together, even if you’re not the one reassembling it. Handy for ordering a short block or a long block. The part numbers are the ones Case stamped on the box. Fuel injection parts are listed in the 580M Series 3 Parts Catalog.

Fuel System: Injection Pump and Line Routing

Section 3 covers fuel system parts. Fuel injection pump (03-04), injection system components (03-05, 03-06), piping (03-07), fuel filter (03-08), and fuel pump (03-09). The diagrams show the routing of fuel lines from the reservoir (03-01) through the filters to the injection pump. If you’re replacing a leaky injection line on a 580M, this catalog shows you the exact part number for the pipe assembly, including the banjo fittings and washers. No more guessing at the parts store.

Aftermarket parts catalogs often renumber parts to their own system, or they use poor scans that are missing details. The Automotive Industry Overview includes discussion of parts documentation standards. This OEM document from Case has the original factory illustrations, printed in 2008 with book form number 87632283 NA. The part numbers haven’t been tampered with. You see exactly what Case intended. No ambiguity, no ‘equivalent’ parts that don’t fit. The Automotive Industry Overview also covers the importance of manufacturer-sourced documents in heavy equipment repair.

Whether you’re a shop owner stocking your parts room or a DIY farmer keeping a 580M in the field, this catalog saves you the headache of ordering the wrong water pump because the picture on the website was wrong. I’ve had more than one job where the aftermarket parts catalog showed the wrong cylinder head gasket. With this OEM catalog, you flip to the cylinder head section, see the gasket part number, and order it. That’s it. No second-guessing. The 580M Series 3 Parts Catalog is the tool you need on the bench.

This is the OEM document. Period.

Q: Can I use this parts catalog to find torque specifications?

A: No. A parts catalog lists part numbers and exploded views. Torque specs are in the factory service manual – different document.

Q: How does this OEM parts catalog differ from a third-party online parts list?

A: Third-party sites often compile data from multiple sources, sometimes mixing up model years or omitting crucial components. This manual is the official 2008 Case 580M Parts Catalog – the same document used by Case dealers. It has 2370 pages of factory drawings, reference numbers, and correct part numbers. If you need the correct part for the cylinder block oil plug or the exact alternator bracket, this is the definitive source. The illustrations are clear and show every hardware piece. No aftermarket renumbering. This is the document CNH America, LLC published for the 580M Series 3.

Stop wasting hours cross-referencing part numbers. Get the document that has them all. Access the Factory Manual for your 2008 Case 580M Series 3 today.