Description

Bantam TK-450 Parts Catalog

You’ve got a Bantam TK-450 telekrane that’s down. The counterweight bracket is cracked, the fuel tank strap is rusted through, or the brake linkage is binding. You pull up a generic parts diagram from some third-party site and get a part number that doesn’t match. Now you’ve wasted a day and still can’t get the machine running. I’ve been that guy. That’s why I only trust OEM documentation. This Bantam TK-450 Parts Catalog – 193 pages of factory-issued part breakdowns – gives you the exact part numbers, descriptions, and quantities straight from Schield Bantam Division. Accurate part numbers.

Engine and Electrical: Group 2 Coverage

Group 2 in Section A covers the engine, engine controls, and electrical system. The catalog lists components for GM, AC, Cummins, and Chrysler powerplants. You’ll find the part numbers for injection pumps, alternators, starter motors, and wiring harnesses. If you need the fuel shutoff solenoid or the ignition switch, this is where you find it. The electrical section includes grounding straps, battery cables, and instrument panel parts.

Fuel System Parts – Tanks, Straps, and Filters

Page 5 of the catalog shows the fuel tank assembly with part numbers for the tank itself, filler neck, cap, straps, and sending unit. The listing includes the fuel line routing and the correct gauge of line. Don’t order a tank from a generic supplier without matching the serial number – there are two versions shown. The catalog notes the serial number break. For the TK-450, fuel tank part numbers are listed under Group 4.

Brake System Parts – House Brake and Swing Clutch

For the house brake assembly, turn to Group 5 under swing shaft and swing clutch controls. You get the part numbers for brake bands, linings, adjustment screws, and return springs. The catalog also covers the vertical swing shaft components. If your telekrane won’t hold position on a slope, you likely need brake parts from this group.

Serial Number Breaks – Why They Matter

Always check serial numbers before ordering parts. The catalog uses serial number breaks to differentiate part changes. For example, on page 4, the main frame prior to serial 1527 uses part number 35446; beginning with serial 1527 uses 35621. Ordering the wrong part because you skipped the serial number check is a rookie mistake. The catalog lists these breaks clearly in the parts lists, often with a note like ‘PRIOR TO SER. 1527’ and ‘BEGIN. W/SER. 1527’. Verify your machine’s serial number against the chart on the inside cover or the first page. I’ve seen guys order a counterweight assembly for a later serial number and find the bolt holes don’t line up. That’s a wasted week. The TK-450 catalog covers all serial breaks from introduction through the 1968 revision date. Ignore this at your own risk.

3 Reasons to Buy the OEM Parts Catalog

First, the exploded views are drawn to scale from factory blueprints. Second, the part numbers are guaranteed to match the original Schield Bantam engineering. Third, you avoid the time wasted cross-referencing aftermarket catalogs that often supersede incorrectly. This catalog includes the full Section A for the basic machine and Section D for the telekrane attachment and accessories.

Frequently Asked Questions

Does the catalog include part numbers for the hydraulic system?

Yes, Group 12 covers the hydraulic system with pump, valve, cylinder part numbers.

How do I find the correct counterweight part for my TK-450?

Look in Group 1 – Main Frame. The catalog lists counterweight assemblies by weight: 4000 lb, 5000 lb, 5500 lb, 6000 lb. You need to know your machine’s serial number and which weight configuration you have. For example, the 4000 lb assembly includes items 2 through 6 on page 4. If you need a 500 lb left-hand counterweight, it’s part B15103. The catalog also includes bolt sizes and washers. Don’t try to mix and match – the bolts are specific to the assembly. If you have a serial number before 1527, the mainframe is different and may affect counterweight mounting. Check the notes carefully. This level of detail is why OEM catalogs are superior to aftermarket.

Is the electrical wiring diagram included?

No, this is a parts catalog, not a service manual. It lists electrical components but not wiring schematics.

How many pages is the catalog?

193 pages.

If you work on other Bantam cranes, check these related parts catalogs: Koehring Bantam S488 S588 S688 Parts Catalog, Koehring Bantam C-744 Parts Catalog, and Bantam Series 725 Teleskoop Parts Catalog.

For a broader context on equipment repair standards, see the Automotive Industry Overview article. The parts catalog reflects the precision expected in the Automotive Industry Overview.

Stop wasting time with wrong parts. Access the Factory Manual now and get your Bantam TK-450 back to work.