Description

B7410d B7410D Parts Catalog

If you have ever ordered a part for a B7410d B7410D and gotten the wrong thing because some aftermarket catalog listed a number that looked close but wasn’t, you know the pain. That is money down the drain and a machine sitting dead while you wait for the return. This Parts Catalog – all 338 pages of it – is the factory book. The one the parts counter uses. The one with the exploded drawings and the exact part numbers that landed that engine in your shop. I have torqued enough head bolts to know that when the part number does not match, the part does not fit. Period.

Crankcase to Cylinder Head: What Is Covered

Open this catalog and you get the whole powertrain. Starting with CRANKCASE (page 1 of the index), then OIL PAN, CYLINDER HEAD, GEAR CASE, HEAD COVER, OIL FILTER, DIPSTICK, OIL PUMP, MAIN BEARING CASE, CAMSHAFT AND IDLE GEAR SHAFT, PISTON AND CRANKSHAFT, FLYWHEEL, FUEL CAMSHAFT AND GOVERNOR SHAFT – it is all there. I counted over eighty sections from ENGINE right through to LABELS and ACCESSORIES. Every exploded view shows exactly how the Valve and rocker arm assembly goes together, and the part numbers are listed in a table right below the picture.

How to Read the REF. No and Part No.

The manual starts with a page titled “Instructions for Parts Books” that lays out the column headings. REF. No. is the callout number on the picture – you look at the drawing, find the circle with the number, then go to the table. Part No. is the factory number you order by. Q’ty tells you how many you need. S.No. gives the serial number range that part fits. The right-pointing arrow means the part works for older and later serial numbers. The hash mark means it does not interchange. If you ignore this, you will order a piston that does not match your block. I have seen it happen.

7 Major Systems Indexed

The product index on page 2 lists seven major systems: ENGINE, FUEL SYSTEM, COOLING WATER SYSTEM, ELECTRICAL SYSTEM, CLUTCH TRANSMISSION, REAR AXLE, BRAKE, STEERING, and more. Each system is broken down into sub-sections like INJECTION PUMP, GOVERNOR, SPEED CONTROL PLATE, NOZZLE HOLDER AND GLOW PLUG. If you need a part for the Fuel system, you turn to that section and find the exact assembly drawing with part numbers for the mechanical fuel pump, fuel tank, fuel pipe, and fuel filter with component parts.

Country Codes: Why They Matter

The remarks column sometimes says “EXCEPT [AU]” or “EXCEPT [FR]”. That means the part works in all countries except Australia or France. The manual includes a table of country codes: A = United States, CA = Canada, FR = France, AU = Australia, NZ = New Zealand, and others. If you order a radiator listed for “EXCEPT [AU]” and your tractor came from Australia, you get the wrong one. The catalog even has separate radiator sections for [AU] [NZ] and [EXCEPT [AU] [NZ]]. This is the kind of detail you only get in an OEM document.

Source Authenticity – Not a Third-Party Reprint

This is a factory PDF from the original publisher. The page count is 338, the part numbers are the ones stamped into the metal. Third-party aftermarket catalogs sometimes swap in generic numbers that look right but do not cross-reference. I have had a junior tech order a camshaft based on an aftermarket list and it was one tooth off in the gear timing. That cost two days of labor. This catalog uses the original B7410d part numbering scheme. When the book says “100K0768” for the CRANKCASE group, that is the actual book number the factory assigned.

FAQ

What does the REF. No. mean in the parts table?

It is the callout number on the exploded view drawing. You match it to the picture.

How do I know if a part will fit my tractor’s serial number?

Check the S.No. column. It shows a range like >= serial number or <= serial number. The manual uses arrows and hash marks to indicate interchangeability. For example, if the part shows a right-left arrow, it works across older and newer serial numbers. If it shows a hash mark (#), it does not interchange. You must compare your tractor’s serial number against that column. If you skip this step, you will waste money on parts that do not fit.

Does this catalog include wiring diagrams or torque specs?

No. This is a parts catalog only. It shows exploded assembly views and part numbers for ordering. For service procedures and torque values, you need a separate service manual. But for ordering the correct bearing, seal, or gasket, this is the only book you should trust.

Are there options like upper gasket kit and piston kit listed?

Yes. Look for sections labeled UPPER GASKET KIT [OPTION], LOWER GASKET KIT [OPTION], and PISTON KIT [OPTION]. These give you the factory-assembled kit part numbers rather than buying individual seals and rings.

If you are tired of chasing wrong parts and wasting weekends, get the factory data. Automotive Industry Overview aside, this catalog is built for one thing: telling you exactly what part number to order. Automotive Industry Overview Not generic, not approximated. Access the Factory Manual and put the right part on the bench the first time.

• Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide
• Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs
• Longagribusiness 410 DTC, 450, 450 DTC, 470 DTC, 530 DTC 2002 Parts Catalog