Description

Tong Yang Moolsan T254NH 2014 Parts Catalog

Trying to order parts for a Tong Yang Moolsan T254NH 2014 Parts Catalog without the factory breakdown? You’ll end up with the wrong bolt, waste a week waiting for a replacement, and hold up the whole job. I’ve seen too many guys buy an aftermarket parts list that shows a generic picture and leaves out the LH/RH distinction. That’s how you get a hydraulic line that doesn’t reach. This is the real deal. 93 pages of factory-fresh exploded diagrams, part numbers, and ordering instructions. Printed 2014 by Tong Yang Moolsan in Korea. This is what the dealer uses.

Before you touch the phone to call a supplier, you need the serial number of your tractor. Page 3 lays out the ordering checklist: model, serial number (starting H00001), part number, description, quantity. Without this catalog, you’re guessing. The catalog even has its own part number – 11119120030 – so you can order another copy if you drop this one in the grease pit.

Group Indication and Figure Numbers: Navigating the Catalog

The catalog uses a group symbol and figure number system. Each major assembly gets a FIG number – you’ll see FIG 101 for engine front, FIG 601 for cylinder case, all the way up to FIG 901. The group indication tells you where on the tractor the part lives. Page 4 explains exactly how to read the table: group symbol, figure number, section name, page number, and the revision year. This isn’t guesswork. You look at the symbol illustration, find the right FIG, and flip to that page. That’s it.

FIG 101 to FIG 901: Exploded Diagrams You Can Trust

Each FIG page shows an exploded view of the assembly with numbered callouts. The parts list next to the diagram includes description, quantity, type (like bolt, nut), and LH/RH designations. This catalog covers both engine and chassis. The table of contents runs through 20 slide numbers, then jumps into figures: 101 through 116 for engine, 201 and 203 for transmission, 301-309 for hydraulic, 401-415 for steering/front axle, 501-505 for brakes, 601-607 for PTO and rear axle, 701-705 for wheels and tires, 801-805 for electrical, and 901 for cab. Every exploded diagram is factory-original, not redrawn by someone who’s never held a wrench.

Ordering Parts: What You Need From Page 3

Page 3 gives you the exact procedure for ordering spare parts. You need the tractor model T254NH, the serial number (reference H00001, but yours is different), the part number, description, and quantity. The catalog warns you to use original spare parts for performance and longer life. I’ve seen aftermarket seals fail in a season. This catalog lets you order the exact part, not a “universal” that almost fits. Getting the right part the first time means the tractor stays running, not sitting.

Why Factory Parts Catalog Beats Aftermarket Lists

Aftermarket parts catalogs often combine multiple models, redraw diagrams to save space, or omit the LH/RH notes. This one is model-specific – only T254NH. The exploded views are taken from actual production drawings. The part numbers match what Tong Yang Moolsan ships. If you’re rebuilding the cylinder case, FIG 601 shows every bolt and gasket. You can cross-reference with the part number listed. No generic line drawings. This is the same source document used by factory service centers and dealerships for the agricultural industry overall – you can read more about that at Automotive Industry Overview. For a broader view of how these machines fit into global farming, check Automotive Industry Overview.

Related Manuals for Your Tractor Fleet

If you own multiple models, you’ll want the Tong Yang Moolsan T293HST 2009 Parts Catalog and the Tong Yang Moolsan T254NC 2014 Parts Catalog for the NC variant. For a different brand, the Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide covers classic fastening specs.

Does this catalog include torque specifications?

No. This is a parts catalog, not a service manual. It shows part numbers and exploded views, not torque values or repair procedures.

Can I use this to order parts for my T254NH?

Yes, it contains the factory part numbers and exploded diagrams. You need the tractor serial number. The catalog lists serial number H00001 as a reference, so you’ll need to provide your tractor’s serial number when ordering. The ordering section on page 3 explains exactly what information you need to give the dealer: tractor model T254NH, serial number, part number, description, quantity. Without this catalog, you’re guessing at part numbers, and that leads to returns and downtime. This is the same document the dealer uses.

How many pages does the catalog have?

93 pages total, covering engine and chassis assemblies with full exploded views and part numbers.

Is this a service repair manual?

No, this is a parts catalog. It shows exploded views and part numbers for ordering. For repair procedures, you need the service manual. Using this catalog with the service manual gives you both the how and the what.

Stop wasting time with wrong parts. Access the Factory Manual and get back to working on the tractor instead of searching for the right bolt.