Description

Terex TX760B 2010 Parts Catalog

If you’re holding a Terex TX760B 2010 Parts Catalog that weighs about as much as a spare tire, you’re in the right place. I’ve been turning wrenches for 28 years, and I’ve seen more aftermarket parts diagrams that look like a kindergartner’s crayon drawing than I care to count. This is the real deal – a factory OEM document, 2449 pages thick, direct from Terex. No reprints, no third-party guesswork. Every part number, every exploded view, every seal and cylinder assembly is right there. You want to order a stabilizer cylinder rebuild kit? This catalog tells you exactly which revision you need. That saves you from buying the wrong part and having the machine sit another week while you wait for the return.

Engine Cover and Cylinder Assemblies

The manual breaks down the Engine Cover Yellow and Engine Cover White sections (pages 36 and 40) into individual panels, hinges, and latches. But the real meat is the digger stabiliser cylinder. The Digger Stabilisers – Sideshift Stabilizer Cylinder chapters (pages 16, 18, 28, 30) show you the complete cylinder in cross-section – piston, rod, seals, and all the O-rings. If you’ve ever had a stabiliser cylinder leak down on a grade, you know the value of having the exact seal kit number. This catalog gives you the part number, not a “compatible” guess.

Chassis Sections – Sideshift and Centremount

Four separate chassis sections cover Chassis – Sideshift Long, Chassis – Centremount Short, and Chassis – Centremount Long. Each page shows the frame weldment with all brackets, pins, and bushings called out individually. Need the bushings for the sideshift carriage? The exploded view on page 22 will show you exactly which bushing goes where, with the OEM part number. No cross-referencing with a micrometer required.

Front Axle – 2WD and 4WD Variants

The front axle section runs from page 44 to page 68, covering everything from Front Axle – Installation 2 Wheel Drive/2 Wheel Steer to multiple 4WD/2WS installation variants. If you’re swapping a hub or rebuilding the steering pivot, the catalog includes the housing, pivot, and wheel hub breakdowns. Each subassembly lists the bolts, seals, and bearings. For a 4WD machine, the different installation sections account for the driveshaft and differential interfaces. You’ll see exactly which parts differ between 2WD and 4WD – saves you from ordering a part that won’t fit the axle housing.

Who Needs This Manual (And Who Doesn’t)

This parts catalog is for anyone who owns, maintains, or repairs a Terex TX760B backhoe loader. If you’re a home-garage guy who likes to dig in and order your own parts, this is your ticket to getting the right parts the first time. If you run a shop that sees these machines, having this on the bench means your parts guy can look up the exact number while the machine is still in the bay. Beginners? Yes – because the exploded diagrams are clear, and every part is labeled. But you need to know your way around a wrench. This isn’t a service manual with torque specs; it’s a parts catalog. You still need the service manual for assembly procedures. That said, if you’re ordering parts for a stabilizer cylinder or a front axle, having the catalog open saves you hours of calling the dealer with vague descriptions.

Factory OEM vs Aftermarket Catalogs

I’ve had parts arrive that were supposedly “direct replacements” for a Terex machine, only to find the bolt pattern was off by a quarter-inch. That doesn’t happen with this catalog because it’s the factory print. The part numbers are Terex numbers, not some aftermarket house’s re-label. Every page comes from the original 2010 publication, not a scanned copy that lost the fine lines. If you’re used to cheap online catalogs that list a single generic part for multiple models, this will feel like a breath of fresh air. It’s specific to the TX760B. Automotive Industry Overview might tell you about heavy equipment manufacturing, but it won’t tell you the part number for the digger stabiliser cylinder seal kit. This manual will.

FAQ

Will this parts catalog work for a Terex TX760B built after 2010?

This catalog covers the 2010 model year. For later revisions, there may be superseded part numbers – but this gives you the base OEM numbers to start from. Always check with your dealer for the latest revision.

Does it include exploded views for the hydraulic cylinder?

Yes. The Digger Stabilisers – Sideshift Stabilizer Cylinder sections (pages 16, 18, 28, 30) show the complete cylinder assembly with all internal components and seal kit part numbers.

Don’t waste time chasing parts with guesswork. Access the Factory Manual from AutoRepairManuals today. It’s the same document Terex dealers use. You’ll get 2449 pages of OEM part numbers, exploded views, and the confidence that what you order will fit.

Related manuals you might need: Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual”>Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual, Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages”>Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages, Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual”>Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual.