Description

Terex TL210 2013 Parts Catalog – Factory Parts Identification for the TL210 Wheel Loader

I’ve spent more years than I care to count under heavy equipment, and nothing kills a day faster than bolting on a part that doesn’t fit because someone used an aftermarket cross-reference. This Terex TL210 2013 Parts Catalog is the original factory documentation – the same binder the dealer parts counter uses. 540 pages of exploded views, exact part numbers, and ordering information. No guessing, no mismatches.

Terex TL210 2013 Parts Catalog: What’s Inside the 540 Pages

This catalog starts with Inspection Parts on page 23, then runs through every major assembly on the machine. Front Chassis (page 27), Articulation section that splits at serial TL0210 0219 (page 30), Rear Chassis with Equipment (page 41), Hydraulic Oil Tank (page 50), Fuel Tank (page 54), Engine Hood (page 56), Steering Unit (page 68), and even the Stickers section with Terex decals – both standard and USA-specific variants (pages 70-74). Each chapter gives you an illustrated breakdown with callout numbers keyed to the parts list.

Why Factory Parts Catalogs Beat Aftermarket Lists

Aftermarket parts catalogs are often scanned from old copies, with blurry illustrations and missing supersessions. This one is a direct OEM release from Terex, dated 27-August-2013, revision 2.00, reference number 5780290020. The part numbers are verified against the factory database. When you’re ordering a hydraulic fitting or a steering column seal, the difference between a genuine Terex part and a generic substitute can mean the rig stays running or sits deadlined. I trust factory data because I’ve seen what happens when you don’t.

3 Common Parts Lookup Errors This Catalog Eliminates

1. Wrong serial number cutoffs. The Articulation section splits into two variants – one for machines up to TL0210 0219, one for after. This catalog shows the exact break point.
2. Sticker and decal mismatches. USA-spec machines had different warning labels. Pages 74 and onward show the specific Terex-USA decals.
3. Alphanumeric index confusion. Starting at page 511, the alphanumeric parts list cross-references every part number in the book. No flipping through 500 pages hunting for a bolt you can see in the diagram.

Use the Alphanumeric Index to Speed Up Ordering

Skip the chapter hunting. Go straight to page 511 where the alphanumeric list covers every part referenced in the catalog. Each entry gives the reference number and the page where the illustration lives. If you know the part number – even a partial match – this index gets you to the right exploded view in seconds. For DIY shop owners who bill by the hour, that’s the difference between a five-minute lookup and a half-hour headache.

Audience Fit: Who Actually Needs This Catalog

Home garage guys who maintain their own TL210 wheel loaders will find the exploded diagrams far clearer than any third-party website. Professional shop foremen can hand this to a junior tech and say “find the part, order it, done.” Even equipment brokers use these catalogs to verify original components before resale. If you’re chasing a hydraulic leak on a TL210 and need to identify a fitting seal, the picture on page 50 of the Hydraulic Oil Tank section saves you from pulling the wrong part off the shelf.

Source Validity: OEM Print, Not a PDF Guess

This is a direct digital copy of the factory-issued Illustrated Parts Catalog from Terex Compact Germany GmbH, Crailsheim. It covers serial numbers TL0210 0101 through XXXX. The file is in English, German, French, and Spanish – the multilingual table of contents starts on page 3. The “Important notes: Catalog, Ordering, Repair” section (page 14) explains how to interpret the exploded views and how to order parts from your Terex dealer. No reprints, no aftermarket translations. Automotive Industry Overview tells you why OEM documentation matters in heavy equipment. Automotive Industry Overview further emphasizes the importance of factory data.

FAQ – Common Questions

Does this catalog include repair procedures or torque specs?

No. This is a parts identification manual – exploded views and part numbers only. You need the service manual for torque values and overhaul steps. See the TEREX TL210 2008 Service Manual for that.

What years and serial numbers are covered?

2013 edition, serial number range TL0210 0101 to XXXX. If your machine falls outside that range, check the TEREX TL210 2009 Parts Catalog or earlier editions.

Can I use this to order parts from a dealer?

Yes. The part numbers are factory-original. Hand the dealer the reference number and they can pull the correct Terex part.

Is the index really 30 pages?

The alphanumeric parts list runs from page 511 to around 540 – about 29 pages of tiny type. It’s thorough enough to cover every bolt and hose in the book.

Related Manuals

• TEREX TL210 2008 Service Manual
• TEREX TL210 2009 Parts Catalog
• Schaeff-Terex SKL 863 2003 Parts Catalog

If you need the right part for your TL210 and you’re tired of chasing dead ends, Access the Factory Manual and get the same data your dealer uses. No wasted trips to the parts store, no returns on wrong seals. Factory specs, 540 pages, sorted and indexed.