Description

Terex Schaeff SKL 835 1995 Parts Catalog – Factory OEM Parts List

You know the drill. You got a wheel loader down in the yard, need a hydraulic fitting, and the local parts guy hands you something that “should work.” Then you spend an afternoon chasing leaks because the thread pitch was off by half a millimeter. That’s money down the drain and a customer breathing down your neck. This Terex Schaeff SKL 835 1995 Parts Catalog is the factory-issued parts list, not a third-party reprint. It gives you the exact part numbers, exploded diagrams, and ordering references that Schaeff’s own service department used. If you’re working on an SKL 835, you stop guessing and start ordering the right piece the first time.

268 Pages of Exploded Views and Part Numbers

This catalog runs 268 pages. It’s organized by Hauptgruppen (main groups) – engine, drivetrain, hydraulics, chassis, electrical, and more. Each group breaks down into subgroups with labeled illustrations. For example, the hydraulic tank assembly is under main group 4.000 (Hintenwagen mit Aufbauten) and then subgroup 4.002. You find the part, note the reference number, look up the part number in the index, and place the order. No cross-referencing aftermarket databases. The manual includes a full alphabetic index and a contents-by-group table so you can get to the right section fast. Page 3 shows the preface and user guide. The German “Benutzerführung” explains how to read the diagrams – pay attention to the “n.B.” notation when a length must be specified on order.

Why Factory Parts Catalog Beats Aftermarket Copies

Aftermarket parts catalogs are often scanned from old paper, missing pages, or have part numbers that were superseded years ago. This one is a direct digital copy of the original Schaeff-Terex publication from 1995. It’s valid from serial number 835/0100 onward. The part numbers are original Schaeff OEM numbers, not renumbered by some third-party distributor. When you order a part using this catalog, you get the exact piece Schaeff designed for the SKL 835. The catalog also includes ordering instructions (Bestellhinweise) and contact info for the Schaeff service department in Rothenburg and Langenburg. If you need a part that’s been superseded, the manual won’t help – but at least you know the original number to cross-reference.

How to Use This Catalog: Finding the Right Part for Your SKL 835

The catalog is structured in a logical flow: first, identify the main group (e.g., 4.000 for rear chassis with attachments). Then drill down to the subgroup (e.g., 4.002 for hydraulic tank). The exploded view shows each part with a callout number. The corresponding part list gives the part number, description, quantity, and any notes like “n.B.” (length must be specified). The index at the back (alphabetical) lets you search by part name. This is a parts catalog, not a repair manual – it won’t tell you how to rebuild the hydraulic pump. But it will tell you the exact seal kit number you need. Pair it with the factory service manual for the SKL 835, and you’ve got a complete workbench setup.

Tech Tip: Always Check the Serial Number Range

This catalog is valid from machine serial number 835/0100 onward. If your loader is older than that, some parts may differ. The catalog states “Gültig ab FZ-ID-Nr. • Valid from serial no. • A partir du no. de série 835/0100>”. Ignore that and you’ll order a part that doesn’t fit. Also note that the catalog is trilingual – German, English, French. The English sections are clearly marked (e.g., “Preamble”, “Guide for user”, “Order references”). Don’t let the German headings scare you; the structure is the same in all three languages.

Does This Catalog Cover the Electrical System?

Yes, main groups include electrical components. You’ll find wiring harnesses, switches, sensors, and lighting parts listed with factory numbers. But again – this is a parts catalog, not a wiring diagram manual. The exploded views show the physical layout of components, not the circuit paths. For electrical troubleshooting, you’ll need the service manual’s wiring diagrams. However, if you need a replacement alternator or starter, the part number is right here.

Related Manuals for the Schaeff-Terex Line

• Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual
• Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages
• Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual

For a broader look at how parts catalogs are used in heavy equipment, see Automotive Industry Overview. Automotive Industry Overview also provides context on OEM parts numbering standards.

Does this parts catalog include torque specifications?

No. This is a parts catalog, not a service manual. It lists part numbers and exploded views. Torque values are in the factory service manual for the SKL 835.

Can I use this catalog for a Terex Schaeff SKL 853?

No. The SKL 835 is a different model with different components. The part numbers in this catalog are specific to the SKL 835 serial range 835/0100 and above. Ordering parts for a different model using this catalog will result in incorrect fitment. Use the correct parts catalog for your model – see the related manuals listed above.

If you’re tired of wasting time on wrong parts and want the factory-issued list that Schaeff’s own parts department uses, this is it. Access the Factory Manual and get the right numbers on your workbench.