Description

Terex PT-80CE 2010 Parts Catalog – Factory OEM Manual

If you have ever ordered a part for a Terex PT-80CE and gotten a box of wrong metal, you know the pain. Aftermarket parts catalogs are a gamble. They renumber things, skip revisions, and leave you holding a bolt that doesn’t fit a thread. This is the 2010 factory Parts Catalog from Terex — 32 pages of exploded views, part numbers, and serial number breaks. No guesswork. If the manual says 380-xxxxx, that is the part. Period.

Cab Assembly (R.O.P.S.) – Page 1-A Breakdown

Section 1 covers the Cab (R.O.P.S.) Assembly for serial numbers ETI 00101-Current. Each exploded diagram shows every bolt, seal, and latch. The part numbers are listed with the required prefix 380. You need a new cab door? Section 3-A covers the optional Cab Door Assembly. Don’t assume the standard cab uses the same parts — the catalog splits them. Check your serial number before ordering.

27 Sections Covering the Entire Machine

From the Chassis Assembly (Section 5-A) to the Road Safety items (Section 27-A), this catalog covers every major system. Sections include Hydraulic Reservoir Assembly (8-A), Lift Arm Control Valve (10-A), Engine Assembly (13-A), and even the optional Air Conditioning (25-A) and Cab Heater (26-A). The Undercarriage and Drive Table assemblies are separated into right and left – Sections 17-A through 20-A. That level of detail cuts down on returns.

What About the Hydraulic System?

Hydraulics are where most aftermarket catalogs fail. They lump all hoses and fittings into one drawing. This Terex catalog splits the Hydraulic Control Assembly (9-A), Hydraulic Drive/Auxiliary Pump (11-A), and Pilot Generation Block (12-A) into separate sections. Each has its own part numbers. There is also a separate section for Hydraulic Service Items & Lubricants at the back of the manual. If you need a cylinder seal kit, check the Cylinder Service Items PT-80 list. That is the difference between a machine that runs and one that leaks.

Get the Right Part Number the First Time

You will notice the manual says to add prefix 380 to all part numbers. That single step eliminates the confusion of cross-referencing. The General Service Items & Lubricants page lists filters, belts, and coolant by manufacturer and part number. For example, the engine oil filter, primary air filter, and diesel fuel filter are all specified. Using the wrong filter can starve the engine or clog the system. Stick to the factory numbers.

OEM Documentation vs. Aftermarket Reprints

We only carry original factory PDFs. This is not a scan of a scan. The Automotive Industry Overview might tell you about manufacturing standards, but it won’t tell you the torque on a lift arm pin. That is what this catalog is for. Aftermarket manual sellers often lift data from older editions and miss updates. This 2010 edition is the current version for all PT-80CE machines with serial numbers from ETI 00101 onward. If you own a machine within that range, this is the catalog.

Need related manuals for other Terex models? Check the Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual or the Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages. Also see the Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual.

For background on the industry, the Automotive Industry Overview provides broader context, but you need the factory numbers to get the job done.

FAQ: Common Questions About the PT-80CE Parts Catalog

Does this catalog include torque specifications?

No. This is a Parts Catalog, not a service manual. It lists part numbers, exploded views, and quantities. Torque specs are in the service manual. If you need torque values, you need the factory service manual, not this catalog.

What serial numbers does this cover?

Serial numbers from ETI 00101 to Current (the time of printing in 2010). Check your machine’s serial plate. If your machine is older, you may need an earlier edition.

Can I use this to rebuild the engine?

You can use it to order parts. The Engine Assembly section (13-A) shows every component with part numbers. But assembly instructions and clearances are not in this catalog. For that, get the service manual.

Is the PDF searchable?

Yes. The file is a high-quality PDF with OCR text. You can search for part numbers, section names, or keywords. It is 32 pages, so you can print specific sections for the workbench.

If you are tired of guessing part numbers and wasting time on returns, this is the fix. Access the Factory Manual now and keep it on your tablet or printed out. Every part number is verified by Terex. No reprints, no third-party numbers. Just the OEM data you need.