Sale!

Terex PT-30 2010 Parts Catalog – OEM Exploded-View Diagrams

(4 customer reviews)

Original price was: $44.10.Current price is: $35.00.

Factory parts catalog for Terex PT-30 (2010): 25 pages of OEM exploded-view diagrams, part numbers, and lubricant specs.

SKU: 28914008019 Categories: , , Brand:

Description

Terex PT-30 2010 Parts Catalog – OEM Factory Manual

If you’re ordering parts for a Terex PT-30 without the factory parts catalog, you’re gambling. One wrong part number and you’re stuck waiting a week for a return. This Terex PT-30 2010 Parts Catalog is the OEM document from Terex, printed June 2010. 25 pages, serial number PTA 00501-Current. It covers everything from the cab to the undercarriage.

Terex PT-30 2010 Parts Catalog cover page showing factory manual

21 Assemblies – From Cab to Undercarriage

The catalog breaks the machine into 21 numbered assemblies. Each section covers a specific system: Cab (R.O.P.S.) Assembly on page 1-A, Light Bar on 2-A, Chassis on 4-A, Radiator/Oil Cooler on 6-A, Hydraulic Reservoir on 7-A, Drive/Auxiliary Pump on 9-A, Engine Assembly on 10-A, Fuse Panel on 11-A, Torsion Axle on 12-A, and both left and right undercarriage assemblies. The serial number range PTA 00501-Current means this applies to machines built after that break point. If your machine is older, check the serial plate before ordering.

Engine and Hydraulic Assemblies: Exact Part Numbers

Engine section (page 10-A) lists the Perkins engine, including oil filter part number 0200-377, fuel filter 0200-213, and fan belt 2045-793. Hydraulic control assembly on page 8-A includes pump and valve parts. For each assembly, the manual shows an exploded view diagram with callouts matching the part number list. You need the diagram to verify orientation and quantity. For the hydraulic reservoir assembly (page 7-A), the part numbers cover the tank, cap, and return filter.

Add the 380 Prefix Before Ordering

Inside the manual, page 2 has a note: “When ordering parts, always add the prefix 380 to part numbers listed.” That means if a part number is 0200-377, you order 380-0200-377. Miss that and you’ll get the wrong item. I’ve seen guys bypass this step and end up with a box of wrong parts. The Automotive Industry Overview confirms that original equipment documentation reduces ordering errors. For more background on part numbering conventions, check the Automotive Industry Overview.

What Filters and Fluids Are Listed?

After the assembly sections, the manual includes a General Service Items & Lubricants table. It lists the exact manufacturer part numbers: Engine Oil Filter from Perkins (140517050), Primary Air Filter from Donaldson (P821575), Secondary Air Filter from Donaldson (P822858), Antifreeze/Coolant part numbers, engine oil in quarts and gallons, grease in tubes. This is critical because using a cross-reference aftermarket filter might not fit the PT-30’s tight engine bay. Stick with the OEM numbers as printed. Need the service manual for repair procedures? Check the TEREX PT-30 Service Manual. For another related machine, refer to the Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual.

Frequently Asked Questions About This Terex PT-30 Parts Catalog

Does this catalog include torque specs?
No. It is a parts catalog, not a service manual.
What serial numbers does this manual cover?
It covers serial number PTA 00501-Current. “Current” means machines produced at the time the manual was printed (June 2010). Check your machine’s serial plate.
How do I order parts using this catalog?
Find the part number in the diagram, then add the prefix 380 before the number. For example, part number 0200-377 becomes 380-0200-377. Call your Terex dealer or order online with that number.
Can I use this catalog for a PT-30 with a serial number lower than 00501?
This manual specifically covers serial # PTA 00501-Current. For earlier machines, you need the previous revision. The assembly designs changed. Using this catalog for older units will likely result in wrong parts. Terex made significant changes to the lift arm and undercarriage assemblies after serial 00501. Without the correct catalog, you’ll be guessing on every nut and bolt. Get the matching manual for your serial number.

This factory document is the only source you should trust for part numbers. Don’t rely on aftermarket lists or memory. Access the Factory Manual from AutoRepairManuals and keep a copy in your shop. The TEREX PT-30 Parts Catalog is the same manual you see here – get the official PDF now.

Additional information

Brand

Terex

Language

English

4 reviews for Terex PT-30 2010 Parts Catalog – OEM Exploded-View Diagrams

  1. Charles W.

    Great workshop guide. Immediate link after payment. A must-have for any Terex PT30 owner doing repairs. I will definitely buy again.

  2. workshop_guy

    This is just what I needed. The PDF looks clean. Every spec sheet is included for Terex PT30. Worth every penny.

  3. David K.

    Great buy! Instant access after checkout. Contains clear schematics for Terex. Saved my repair job! Thank you.

  4. diy_master

    Perfect OEM spec sheet. It is very easy to read on my tablet without losing quality. Contains precise schematics for Terex. I will definitely buy again.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…