Description

Terex 860Elite 2010 Parts Catalog

You’ve got a Terex 860Elite 2010 Parts Catalog down for a digger stabilizer leak. The cylinder seal kit you ordered doesn’t match. Sound familiar? That’s what happens when you work off aftermarket parts catalogs. They guess. This OEM parts catalog doesn’t. 2451 pages of factory part numbers, exploded diagrams, and assembly breakdowns straight out of the Terex plant in Coventry. After 28 years in the shop, I’ve learned that buying a part off a generic number costs you more in return trips than the manual does up front. This document is your insurance against wrong parts.

Digger Stabilisers: Cylinder Part Numbers on Page 16

Every time I tear into a backhoe stabilizer cylinder, I need the exact seal kit or piston assembly. Page 16 of this catalog shows the “Digger Stabilisers – Sideshift Stabilizer Cylinder” with all its components. Not a generic drawing—Terex’s own exploded view with the factory part numbers you’d get at the dealer counter. That cylinder assembly page saves you from cross-referencing aftermarket sites that leave out critical O-ring sizes.

Terex 860Elite 2010 Parts Catalog: What You Get

2451 pages means you’re not flipping between supplements. Chassis, digger stabilisers, engine covers (yellow and white sections on pages 22 and 26), front axle installations with 4WD/2WS variants, steering system, wheels. The catalog breaks the machine into systems so you can find the right part fast. There’s even a mechanical installation section for the sideshift mechanism starting page 14—that alone saved me a Saturday when I had to rebuild a digger frame mount.

3 Systems Covered in This Parts Catalog

• Chassis & Stabilisers: sideshift short and centremount short chassis, mechanical and cylinder assemblies for stabilisers
• Engine Covers: yellow and white versions with hinge pins and latch hardware
• Front Axle & Steering: over 20 pages of axle installation diagrams for 4WD/2WS configurations plus the 2-wheel steer steering system

Each system uses the same numbering structure as the Terex dealer network. If you need to order a part, you read the callout number, look up the reference, and hand it to your parts counter. No ambiguity.

Why Use OEM Documentation?

I’ve watched guys burn a whole morning trying to fit a cylinder rod from a different series because a third-party catalog said “fits 860Elite.” Factory documentation doesn’t do that. This 2010 Parts Catalog was printed by Terex themselves—not a scan, not a reprint from a manual library. The images are crisp, the part numbers match the latest revision at the time of publication, and the assembly sequence is the same one the factory uses. For context, check the Automotive Industry Overview to see how OEM traceability became the standard. If you work on any Terex backhoe loader, this is the reference you want under the bench.

Front Axle Installation: Where the Detail Lives

Front axle pages in this catalog run from 30 through 60, covering every permutation—4 wheel drive, 2 wheel steer. Need the kingpin repair kit? The exploded view shows the shim stack and bearing part numbers. Need the steering cylinder mount? It’s there. The same logic applies to the chassis and digger sections. That level of detail makes the difference between a one-day job and a three-day headache. And for related equipment, look at the Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual or the Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages if you work on the smaller skid steers.

Don’t trust aftermarket documentation on principle. I’ve seen too many mislabeled parts. This catalog is the real deal. Automotive Industry Overview backs up the shift toward certified factory data, and I’d rather spend money on a proper manual than on a wrong return.

Does this catalog include exploded views of the cylinder?

Yes, page 16 shows the digger stabilizer cylinder assembly.

Is this the same manual Terex dealers use?

Dealers use a digital subscription, but this paper catalog contains the identical part numbers and diagrams that Terex published for the 2010 860Elite. It’s the same OEM data, just printed on pages instead of a screen.

Can I use this if I have a different model?

This catalog is specific to the 860Elite model. For other Terex backhoe loaders you would need the corresponding factory parts catalog for that year. The 860Elite shares some chassis components with the 760, but the part numbers differ. Do not assume cross-compatibility without verifying.

How many pages cover the front axle?

Over 30 pages.

Stop ordering wrong parts and wasting billable hours. Access the Factory Manual from AutoRepairManuals today.