Description

TCM SS17B, SS18B, SS19B, FS18B, HF18B Parts Catalog

You’ve got a TCM forklift with a busted side shift or fork clamp. You need a part. You pull up some aftermarket diagram and the numbers don’t match. Now you’re stuck with a dead lift, a customer staring at his watch, and a bin of wrong parts. That’s why this OEM Parts Catalog exists. It’s 242 pages of factory drawings and genuine part numbers for the SS17B, SS18B, SS19B, FS18B, HF18B attachments. Not a reprint. Not a scan from a third party. This is the original TCM document, sourced from the manufacturer’s own archive.

Look at the table of contents. You see sections for ATTACHMENT models like SIDE SHIFT, FORK SHIFT, HINGED FORK, and more. Each model gets its own FIG. number — you find the illustration, match the part number, and order with confidence. The manual also covers models like SCOOP, LOAD GRAB, FORK CLAMP, DRUM CLAMP, CARTON CLAMP, ROTATING CLAMP, and piping kits. If your machine has an attachment, chances are it’s in here.

What This Parts Catalog Covers

This isn’t a service manual. It’s a Parts Catalog — built for one job: getting you the right part number the first time. The models included are: TCM SS17B, SS18B, SS19B, FS18B, and HF18B. Also listed are piping kits for FG10C13, FG15C13, FD10C13, FHG15C3, FHD15C3, and similar chassis. Each FIG. number corresponds to an exploded view of the attachment assembly. You see the exact bolt, bushing, hose, or connector you need. No guesswork.

For larger TCM forklift models, check the TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages. That one covers bigger machines. Also worth having on the shelf: TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual and TCM 125B Parts Catalog – 244-Page OEM Factory Manual. All OEM, all factory specs.

How to Order Parts Correctly

The manual spells it out: “When ordering be sure to specify the model name, specification and serial number (machine number) of your machine, as well as the part number and desired quantity.” That’s the rule. If you skip the serial number, you might get a part that fits a different production run. The nameplate is on the truck. Write it down before you open the catalog. The book even shows you how to navigate: find the FIG. number from the contents, confirm the illustration, then look up the part number list.

Don’t trust aftermarket catalogs that re-draw parts. I’ve seen them swap bolts for wrong grades, or miss a seal entirely. This TCM original uses abbreviations like ASSY for assembled unit, RH and LH for sides, and * for kit parts. All defined on page 4. You get the real deal.

Abbreviations and Symbols You Need to Know

Page 4 lists them: ASSY = assembled unit, RH = right hand when facing forward, LH = left hand, AR = as required, * = set or kit, T = thickness, + = not illustrated, # = not sold separately. Pay attention to the asterisk — if your part has a *, you order the kit, not the individual piece. The manual also notes that materials and specifications are subject to change. You can’t rely on a five-year-old third-party PDF. This catalog is the current OEM document.

Why OEM Documentation Matters

Every time I see a shop using a generic parts list, I cringe. They miss updates, they mislabel threads, they show the wrong hydraulic port. With this TCM SS17B, SS18B, SS19B, FS18B, HF18B Parts Catalog, you are holding the same paper that TCM gives its own dealers. The illustrations are exact. The part numbers are current. The attachment section covers not only the models in the title but also related units like scoop, load grab, fork clamp, drum clamp, and carton clamp. There’s even a section for rotators, fork extensions, ram, crane arm, hook, and attachment piping.

For an overview of the broader industry context, see Automotive Industry Overview. The internal combustion engine forklifts covered here are common in warehouses — Internal Combustion Engine basics still apply, but the attachment hydraulics are unique. This catalog stays focused on the parts that make those attachments work.

Using the Parts Catalog: Illustration and FIG. Numbers

Open to any FIG. number. You’ll see a clean line drawing with reference letters. Next to it, a table lists the part number, description, quantity, and notes. The front pages include a “HOW TO USE” section. It’s a flowchart: if you know the part name, go to the list of contents; if you know the location, go to the same contents. Either way, you land on the FIG. number. Then confirm your machine serial number. That’s it.

One tip: always check the “AR” (as required) quantity. Some fasteners are listed as AR because the attachment may use a variable number depending on the chassis. Don’t order ten if you need six.

FAQ

Does this catalog include torque specs for bolts?

No. This is a parts catalog, not a service manual. It lists part numbers and illustrations for ordering.

How do I locate a part number for my TCM attachment?

First, find your attachment model (SS17B, SS18B, SS19B, FS18B, HF18B, etc.) in the table of contents. Note the FIG. number. Turn to that page and match the exploded view. The part number list next to the illustration gives you the exact OEM number. Always cross-check your machine serial number from the nameplate — the manual lists compatible chassis models like FG10C13, FD10C13, FHG15C3, etc. If your serial number falls within the range shown on the FIG., the part is correct. If you’re unsure, consult the index or call your TCM dealer with the FIG. and reference letter. This catalog covers not only the five main models but also a wide range of attachments including load grab, fork clamp, drum clamp, carton clamp, rotator, and more.

Every shop that works on TCM forklifts should have this on the bench. Not a photocopy. Not a compressed online snippet. Original OEM. Access the Factory Manual and keep it on your tablet or print it out. You’ll save yourself at least one return trip to the parts counter per job. That’s worth the price.