Description

TCM FTB16-7, FTB18-7 Parts Catalog

If you’ve ever tried to find a part number for a TCM FTB16-7 or FTB18-7 forklift using a third-party list, you already know the frustration. Blurry scans, missing updates, wrong numbers. That headache ends here. This 226-page TCM FTB16-7, FTB18-7 Parts Catalog is the genuine factory document – the same one dealers pull from. Each FIG number corresponds to a specific assembly, from the drive motor mount to the fire extinguisher bracket. You get exploded diagrams, part numbers, and quantity info printed straight from TCM’s engineering files. Need parts for a larger TCM model? Check the TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages for heavy-duty forklifts.

Look at the contents. The catalog is split into three CHASSIS sections. The first section covers FIG. 1 through 22: drive motor, pump motor, electrical parts, battery case, meter panel, steering axle, wheels. The second section (FIG. 23-44) includes the drive unit, overhead guard, pedals, brakes, frame, bonnet, seat, and hydraulic valve groups. The third section (FIG. 45-56) wraps up with control valves, oil tank, hydraulic lines, tilt cylinder, decals, service tools, and fire extinguisher options. That’s every subsystem you need to order parts for.

226 Pages of Factory-Sourced Diagrams

Each page is a numbered illustration with a corresponding parts list. For example, the DRIVE MOTOR MOUNT (FIG. 1) shows the motor bracket, bolts, washers, and dampeners with their unique TCM part numbers. The catalog includes both FTB16-7 and FTB18-7 variants – columns A and B in the table indicate which model uses each part. You don’t guess; you match your machine’s serial number to the correct illustration.

Electrical Parts: Tracing the Exact Component

Electrical problems on a forklift can be a nightmare if you don’t have the right reference. This catalog dedicates three FIG numbers to ELECTRICAL PARTS. FIG. 5 covers the standard layout, FIG. 6 adds EXA export specifications, and FIG. 7 covers FIT variants. You’ll find the controller (inner parts) in FIG. 14, the VTM unit in FIG. 12, and the fan & controller in FIG. 13. Every connector, relay, and sensor is listed with its part number. No hunting through aftermarket wiring diagrams – it’s all here. The drive motor in these forklifts is electric, unlike an Internal Combustion Engine model. For a different TCM engine forklift, see the TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual.

3 Reasons to Stick with OEM Documentation

First: part number accuracy. Aftermarket catalogs often mix up revisions. TCM’s own catalog includes supersession notes and genuine-only parts. Second: illustration clarity. The exploded views show exactly how each component fits, preventing ordering the wrong seal or bracket. Third: safety. The catalog warns: “Always use TCM’s Genuine Parts. We cannot guarantee any loss or trouble attributable to other parts.” That’s page 2. If you care about the forklift holding a load overhead, that matters. Understanding how industrial vehicles fit into the broader Automotive Industry Overview can help with compliance.

Steering Axle and Hydraulic Line Coverage

Steering issues? Check FIG. 18 (STEERING HANDLE), FIG. 19 (STEERING AXLE MOUNT), FIG. 20 (STEERING AXLE). Need wheel and tire assemblies? FIG. 21 and 22 cover standard and EXA/TRSF. Hydraulic lines for steering and tilt cylinders are covered in FIG. 47-50, with separate illustrations for FIT variants. The tilt cylinder mount and cylinder itself are FIG. 51 and 52. Having the correct part number for a seal or hose saves you a second trip to the dealer. If you need a smaller TCM parts catalog, the TCM 125B Parts Catalog – 244-Page OEM Factory Manual covers a different model.

How to Order Genuine TCM Parts

Page 2 of the catalog spells it out: “When ordering, be sure to specify the model name, specification and serial number (machine number) of your machine, as well as the part number and desired quantity for each part.” That serial number is on the machine name plate. Write it down before you call. With this catalog open to the right FIG number, you can read off the part number directly. No more “Is this the right one?”

FAQ

Does this parts catalog cover both FTB16-7 and FTB18-7 models?

Yes. The contents table shows columns A for FTB16-7 and B for FTB18-7 under each FIG number.

Can I use this catalog to find electrical components?

Absolutely. Three FIG numbers (5,6,7) cover ELECTRICAL PARTS, plus additional figures for the controller, VTM unit, and fan. Each component is listed with its TCM part number.

Is this the same manual the dealer uses?

Yes, it’s an OEM factory parts catalog. The introduction states it contains the component parts of your TCM FORKLIFT TRUCK. Dealers rely on this exact document to look up part numbers. It includes genuine part numbers, supersession data, and the warning to use only TCM genuine parts. Aftermarket catalogs cannot match this accuracy because they often combine multiple models or miss revision changes. With this manual, you have the same reference as the factory service center.

What information do I need when ordering parts using this catalog?

Model, spec, serial number, part number, quantity. Check page 2 for details.

That’s the difference between a correct part and a return trip.

If you work on TCM electric forklifts, this parts catalog belongs on your workbench. You’ll spend less time cross-checking part numbers and more time actually making the repair. Skip the photocopied aftermarket lists. Access the Factory Manual from AutoRepairManuals and get the real OEM data.