Description

TCM FG30c6H, FD30c6H, FG30T6H, FD30T6H Parts Catalog

If you’ve ever waited three days for a part only to find out it’s the wrong one because the parts counter guy used a third-party catalog, you know why this book matters. I’ve been turning wrenches since before some of you were born, and I’ve seen more misordered parts than I’ve had hot meals. The TCM FG30c6H, FD30c6H, FG30T6H, FD30T6H Parts Catalog is 224 pages of factory-issued part numbers, illustrations, and assembly breakdowns for these forklifts. No guesswork. No aftermarket translations that drop a bolt in the list. Page 3 tells you exactly how to order: model name, spec, serial number, part number, quantity. That’s it. This is the same book TCM dealerships use.

224 Pages of OEM Part Data

Page 4 lists the complete contents — from ENGINE MOUNT and AIR CLEANER (G-TYPE and D-TYPE) to STEERING AXLE and DRIVE UNIT MOUNT. Each section has its own FIG number so you can cross-reference the illustration and parts list. The INDEX at the back lets you look up a part by name when you don’t know the number. Every page is laid out the same way: illustration on the left, parts table on the right, with column headers for REF NO, PART NO, DESCRIPTION, QTY, and REMARK. No fluff, no ads, just data. You get the same information a TCM dealer parts counter sees.

Find the Right Part Number Using the FIG System

Open the Contents, find the section you need — say CLUTCH(C-TYPE). The FIG number points you to the correct page. Confirm the illustration matches your truck’s serial number range. Then read the table for the part number. The manual uses abbreviations like ASSY for assembled unit, RH/LH for orientation, AR for quantity as required. If the illustration shows a bolt with a dot, that means it’s not sold separately. You don’t have to guess. This system has been standard in OEM parts catalogs for decades. Stick to it and you won’t order the wrong pilot bearing or seal.

Why Use Genuine TCM Parts?

Page 2 prints it in bold: “Always use TCM’s Genuine Parts. We cannot guarantee any loss or trouble attributable to other parts than ours.” That’s not a marketing line — it’s a liability statement. The gas models run an internal combustion engine (Internal Combustion Engine), and the diesel models have different fuel system components. Gaskets, filters, hydraulic seals — aftermarket parts often use subgrade rubber or wrong hardness. I’ve seen a $40 aftermarket O-ring blow out a $2,000 torque converter. This catalog lists only OEM part numbers. Use those numbers when you call your TCM dealer.

TCM FG30c6H, FD30c6H, FG30T6H, FD30T6H Parts Catalog: Factory Data Only

This manual covers four models: FG30c6H (gas, C-type drivetrain), FD30c6H (diesel, C-type), FG30T6H (gas, T-type), and FD30T6H (diesel, T-type). The C-type and T-type differ in the drive unit mount, mission case, and clutch pack. The T-type uses a torque converter and charging pump, which are separate sections in the catalog. If you work on mixed fleets, having the right catalog for each model saves you from ordering a C-type clutch part for a T-type machine. The forklift industry sits inside the broader automotive industry (Automotive Industry Overview), but forklift parts are niche. You can’t rely on generic engine part numbers.

Avoid Aftermarket Parts Catalogs

I’ve seen techs pull up a third-party PDF that lists a part number that doesn’t match any TCM label. Then they order it, it shows up wrong, and the customer’s machine sits dead for a week. This catalog is an original factory file — not a photocopy, not a recompiled list. The OCR excerpt you see on the site is from the actual manual: right-hand orientation (RH), left-hand (LH), assembled unit (ASSY). That level of detail is missing in generic catalogs. For related wiring, check out TCM Forklift Parts Catalog – Section: Engine Wire Harness (Diesel-To. If you need heavier models, see TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages or TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual.

Frequently Asked Questions

Does this manual include repair procedures?

No. This is a parts catalog, not a service manual. It lists parts and their numbers only.

Can I use this to order parts online?

Yes. All part numbers are OEM factory numbers. Make sure to cross-check with your serial number and specification.

What models are covered?

The manual covers four models: FG30c6H, FD30c6H, FG30T6H, and FD30T6H. These are gas (G-type) and diesel (D-type) forklifts with either C-type or T-type drivetrain. The manual includes sections for engine mount, air cleaner, cooling, fuel, exhaust, clutch, mission, drive axle, steering, and more. Each section has a FIG number and parts list. The INDEX at the back helps you locate part numbers by part name. The manual also specifies RH/LH orientation and abbreviations like ASSY, AR, etc. This is essential for ordering the right parts the first time.

Is this a digital access?

Yes, you will receive a PDF file. Access the Factory Manual now.

If you’re working on one of these TCM forklifts and need to order parts without the headache, this catalog is what you need. Access the Factory Manual.