Description

TCM FG30c3, FHG30c3, FD30c3, FHD30c3, FD30t3 Parts Catalog

If you have ever ordered a side shift bracket for a TCM FG30c3 and ended up with something that didn’t fit, you know the pain. That wasted time, the return shipping, the downtime on a forklift that should be moving pallets. This is the cure. The TCM FG30c3, FHG30c3, FD30c3, FHD30c3, FD30t3 Parts Catalog runs 535 pages of nothing but attachment component breakdowns. No fluff, no aftermarket guesswork. Straight OEM drawings with part numbers cross-referenced to the exact machine serial number range.

How to Use This Parts Catalog

Open the front cover. Inside you get a “How to Use” section that explains the abbreviations and symbols. ASSY means assembled unit. RH is right-hand when facing forward. AR means quantity as required. Every symbol is defined on page 3. You don’t need to wonder if a star (*) means something different from a hash (#). The manual tells you: * indicates a marketable set or kit, # means not illustrated. These details matter when you are figuring out if the fork clamp comes with the mounting bolts or if you have to order them separate.

What the Index Covers: Side Shifts, Fork Clamps, and More

The list of contents is broken out by attachment type. Side shift units (SS28C, SS29C, SS31C, SS32B, SS3A9). Load stabilizers with side shift (SSS3AA through SSS3HA). Fork shift assemblies (FS28B, FS29B, FS31B, FSM31B). Hinged forks, extension forks, load grabs. Rotating clamps, rotating forks, rotating load grabs. Even the less common stuff like block clamps, crane arms, hooks, and the scoop attachments. Every one of those has its own FIG number in the catalog. You find the FIG number in the index, flip to that page, and there is the exploded drawing and the parts list. No need to hunt through 500 pages blind.

Why OEM Parts Documentation Matters

Aftermarket parts catalogs often consolidate multiple years into one vague drawing. That is how you end up with a part that is close but not right. This TCM catalog is factory-issued. The drawings match the actual production parts for the FG30c3, FHG30c3, FD30c3, FHD30c3, and FD30t3 models. The part numbers are the ones TCM stamped on the components. If the catalog says part number 123456-7890, that is what you order. No guessing. No cross-referencing third-party databases that might be wrong.

3 Things to Check Before You Order

First, confirm your machine serial number. The serial number is on the nameplate. This catalog covers specific model variants – FG30c3, FHG30c3, FD30c3, FHD30c3, FD30t3 – plus some related designations like FG30t3 and FD30tZ. Second, use the index to find the correct FIG number for your attachment. Third, read the “How to Order Parts” section on page 2. It tells you exactly what information to provide: model, specification, serial number, part number, quantity. Follow that and you get the right parts the first time.

Verify Your Serial Number

On page 2 of the catalog, the introduction explicitly states: “The machine serial number (machine number) is indicated on the machine name plate.” Do not skip this. If you order a side shift bracket for a FD30c3 but your machine is actually a FD30cZ, the part might not fit. The catalog lists multiple sub-variants – FG30c3, FG30t3, FG30w3, FD30c3, FD30t3, FD30w3, and the Z-suffix versions. Your serial number tells you which column of the parts list applies. Use it.

FAQ

Does this catalog cover the engine or transmission parts?

No. This is a parts catalog for attachments only. Side shifts, fork clamps, load grabs, rotating devices, etc. For engine or drivetrain parts, you need the separate chassis parts catalog.

Can I use this to repair a hydraulic cylinder on a fork clamp?

No. This is a parts catalog, not a service manual. It shows the exploded view and part numbers. It does not contain repair procedures, torque specs, or troubleshooting. You need the service manual for that.

What attachments are included for the FD30t3 model?

The FD30t3 is listed in the model compatibility section. The attachment coverage includes all the same units – side shift, load stabilizer, fork shift, hinged fork, extension fork, load grab, fork clamp, block clamp, rotating clamp, rotating fork, rotating load grab, rotating device, fork extension sleeve, scoop, ram, crane arm, and hook. Check the index for the specific FIG number that matches your attachment type.

How many pages does this manual have?

535 pages. That includes the front cover, how-to-use instructions, the index, and the illustrated parts breakdowns for each attachment group.

Related Manuals

• TCM FG30c3/FD30c3/FD30t3/FG30T3/FG30W3 Parts Catalog – 556 Pages
• TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages
• TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual

For more background on forklift classification standards, see Automotive Industry Overview. For understanding the difference between gasoline and diesel TCM models, see Internal Combustion Engine.

Stop burning time on wrong parts. Access the Factory Manual and get the exact OEM part numbers for your TCM FG30c3, FHG30c3, FD30c3, FHD30c3, or FD30t3 attachment. 535 pages of factory drawings, indexed, ready to print or view on your tablet in the shop. No more returns, no more second-guessing.