Takeuchi TL230 Parts Catalog – 379-Page OEM Exploded-View Index

Description

Takeuchi TL230 Parts Catalog – if you’re hunting for the right part number on a crawler loader, aftermarket lists cost you time and money. I’ve seen guys order a track roller three times because some online database guessed wrong. This is the factory document – 379 pages, direct from Takeuchi, covering S/N 223000001 and up. You don’t guess. You look it up.

Every exploded view, every part number, every quantity and remark. Need a seal for the track roller? The manual shows the part – 1432500560 for the floating seal, plus the O-ring and snap ring. That level of detail runs through the whole machine: engine, undercarriage, hydraulics, cab, attachments. You’re not flipping through generic diagrams that leave out the washer count.

Takeuchi TL230 Parts Catalog: What You Get

Eight major sections indexed from page 0-1. Undercarriage, main frame and control lever, engine and electrical system, hydraulic piping and tank, cover and cab, attachment, decal and tool, hydraulic device. Plus the engine section dedicated to the 4TNV98-ZNTBL. Each section has its own reference numbers – for example, track roller A is U1A010, page 1-1. That layout saves you flipping blind. You find the assembly, you find the parts.

Engine System Breakdown: 4TNV98-ZNTBL

The engine chapter (section 10) lists every component for the 4TNV98-ZNTBL diesel. If you need a bolt or a gasket for the block, the part number is in there. Takeuchi doesn’t renumber generic parts – they keep the OEM supplier IDs. That matters when you’re cross-referencing. Pair this catalog with the Takeuchi TL230 Workshop Manual for torque specs on cylinder head bolts or injection pump timing. The catalog gives you the parts, the workshop manual gives you the procedure.

379 Pages of OEM Part Number Data

That’s 379 pages of indexed parts, none of that “may fit” nonsense. Each page is from the factory press – not a scan of a scan. The track roller sub-assembly shows 0880130010 for the roller, plus the shaft, covers, bushings, seals. Quantities are listed: 8 rollers per machine. Service remarks tell you if the part was superseded. You can order exactly what you need the first time.

This catalog is built for the TL230 crawler loader only. It’s not a generic “compact track loader” manual. The index starts at serial number 223000001. If your machine falls outside that range, check the Takeuchi TL230 Parts Catalog for the correct serial break. For the smaller TL26, see the Takeuchi TL26 Parts Catalog – 288 Page OEM Factory Manual.

What Does the Undercarriage Section Include?

Undercarriage – track frame, rollers, sprockets, idlers, track assembly. The exploded view for track roller A (U1A010) gives you 16 bolts per roller, part number 1100041645, with 16 washers 1141550016. You need the floating seal kit: 1432500560. That’s the kind of detail that keeps a track system together. No guessing which O-ring fits.

Other sections: Main Frame & Control Lever covers the chassis and joystick assemblies. Hydraulic Piping & Tank lists every hose, fitting, and reservoir component. Cover & Cab includes glass, seals, and door hardware. Attachment section covers buckets and couplers – part numbers for the quick coupler pins and bushings. Decal & Tool gives you decal sets and the tool kit contents.

Read the Track Roller A Exploded View Correctly

Page 1-1 shows a typical exploded view. The parts list is keyed to item numbers. Item 1 is the roller sub-assembly, items 2-11 are individual components. The “Chan.” column tells you if a part has been changed – the manual is dated 2010.09.12 for the engine section. Hard to get more current on a TL230. If you’re rebuilding a track roller, you look at the seal set, the snap ring, the plug. The catalog even shows the washer count – 16 per roller. That kind of specificity keeps a rebuild from turning into a leaky mess.

The original equipment manufacturer’s data versus aftermarket? Factory manuals from Takeuchi use their own part number schema – not a re-labeled generic. Aftermarket catalogs often compress multiple variants into one listing. This one separates by serial number and includes service remarks for supersessions. That’s the difference between ordering a part that fits and ordering a part that “might” fit. For the broader context of why OEM documentation matters, see the Automotive Industry Overview on how original equipment specifications prevent assembly errors. Automotive Industry Overview covers standards that aftermarket suppliers don’t always follow.

Does this catalog include torque specs?

No. This is a parts catalog – it lists part numbers, quantities, and exploded views. For torque values and service procedures, get the workshop manual.

Will it work for a TL230 with serial number 223000100?

Yes, the manual covers S/N 223000001 and up – you’re inside that range.

How are the part numbers organized?

Each section has its own reference (e.g., U1A010 for track roller A). The index at the front lists item numbers, part numbers, descriptions, quantities, channel (change) codes, serial number applicability, service remarks, and remarks like “99 Kits, Attachments and Quick Reference.” You read left to right, find the part, order it.

Is this a reprint or a digital copy?

It’s the original file from Takeuchi – same pages the dealer uses, in searchable PDF form.

That’s what a genuine parts catalog should be. 379 pages of factory-correct data for the TL230 crawler loader. If you want to stop cross-checking three different sources and start ordering the right part, this is your document. Access the Factory Manual.