Description

Stavostroj VV2010, VV2510 2002 Operators Manual

If you’re turning wrenches or running the controls on a Stavostroj VV2010 or VV2510, you need the real deal. Aftermarket manuals skip sections, leave out torque values, and guess at fluid capacities. This Operators Manual from 2002 is the original factory document – 158 pages of what the engineers wrote. I’ve seen too many guys snap bolts on a vibratory drum because they used a generic spec. That doesn’t happen with this book.

Specification Manual: Engine and Cooling Data

Section 1 is the Specification Manual. Page 25 gives you the full engine technical data – displacement, power ratings, and the firing order. The cooling system of hydraulic oil is covered in 1.3.13, including the recommended coolant type and capacity. You get the weights, travel parameters, vibration frequencies, and axle specs. Everything is in Imperial units where applicable – pressures in psi, torques in ft-lbs. No metric-to-Imperial conversion guesswork.

Operation Manual: Starting, Riding, Emergency Stops

Chapter 2 is the Operation Manual. It walks you through starting the engine (section 2.7.1.1), riding the machine, and using the vibration control. There’s a dedicated subsection on emergency stopping and machine travel in difficult terrain. The safety regulations section (2.2) is thorough – it covers driver obligations, prohibited activities, and exactly where the safety labels are mounted. If you’re training a new operator, this is the textbook.

Lubrication and Maintenance Manual: Fluid Specs That Matter

Section 4 is the Lubrication and Maintenance Manual. It lists engine oil grades, fuel requirements, hydraulic oil, gear-box oil, and the correct coolant for the cooling system. The lubrication chart on page 78 (approximate) shows every grease point with intervals. You also get the individual maintenance operations – everything from every-20-hour checks to long-term storage. I trust factory fluid specs because they come from the people who built the hydrostatic drive and the vibratory drum.

Air-Conditioning System: Factory Troubleshooting

Section 3 covers the air-conditioning system – basic parts, operation, maintenance, and a troubleshooting table. This isn’t a generic HVAC guide. It’s specific to the VV2010/VV2510 cabin setup. If the AC stops blowing cold, you turn to section 3.4 for the common failures. No guessing which relay or pressure switch is bad.

OEM Source Authenticity – Why Aftermarket Manuals Fall Short

This is a genuine Stavostroj factory publication, 2002 edition. The bookmarks match the printed TOC exactly. Aftermarket reprints often omit the specification tables or mix up the torque values. With this manual, you have the original PDF – clean, searchable, and certified by the manufacturer. Compare that to a scanned copy with missing pages. If you’re also working on other rollers, check out the Operation Manual Vibratory Rollers VV 700 VV 910 or the STAVOSTROJ VV 1100 VV 1500 Vibratory Rollers Operation Manual. For their smaller tandem models, see STAVOSTROJ VH 850 and VH 950 Operating Manual. And if you deal with other drivetrains, the Manual Transmission principles still apply – but this roller uses hydrostatic drive, so don’t confuse the two. Another useful reference is the Manual Transmission for comparing gear ratios, though this machine doesn’t have one.

7 Systems Covered in One Document

The manual is divided into four parts: Specification, Operation, Air-Conditioning, and Lubrication & Maintenance. That includes engine, cooling, hydraulic oil cooling, brakes, steering, vibratory drum, and electrical installation. Each section has its own subsections – example: 1.3.4 Engine gives you the exact make and model, 1.3.13 Cooling System of Hydraulic Oil tells you the oil cooler capacity. You can find the part numbers for filters in the fluid specifications. This is the only source that matches the machine’s VIN.

FAQ – Common Questions About This Manual

Does this manual cover the VV2010 and VV2510 both?

Yes. The title says VV2010/VV2510. The specification tables list both models side by side. One PDF, two machines.

Is this the same as the service/repair manual?

No. This is the Operators Manual – it covers operation, lubrication, and basic maintenance. For major repairs you need the Shop Manual (sold separately). The manual itself states that on page 3.

What torque values are included?

The specification section includes torques for wheel nuts, vibratory drum fasteners, and engine mounting bolts. Exact values are in section 1.3. Exact page numbers vary by print, but look in the Technical Data subsection. I won’t list them here because you need the manual open on your bench.

Can I print or copy the PDF?

The manual states “Re-printing and copying of any kind … is allowed only with our prior written consent.” You can view it on screen and print one copy for your personal shop use. Do not distribute digital copies.

I’ve been torquing head bolts for twenty-eight years. I don’t trust aftermarket paper. This manual is the real factory document – correct coolant capacity, correct grease intervals, correct safety procedures. Access the Factory Manual and keep it in your tablet or your toolbox. Your machine will last longer, and you won’t waste time looking up wrong specs.