Description

Stavostroj VV 2500 Operators Manual – Factory Specs for Your Roller

I see it all the time—someone jumps on a Stavostroj VV 2500 Operators Manual without reading the specs, overstresses the drum, and I get a call. This 19-page Operators Manual from Stavostroj is what keeps that from happening. It’s not a repair guide; it’s the operation bible. If you run heavy machinery, you need the numbers in front of you. Engine data, cooling capacities, electrical ratings—it’s all here. Don’t be the guy who guesses.

Engine Specs and Cooling System Data

Page 14 lists the CUMMINS engine model, displacement, and power ratings at specific RPMs. The Cooling System of Hydraulic Oil section (1.3.14) details the oil cooler capacity and flow rates. Overheat the hydraulic circuit because you ignored those numbers? That’s a $2,000 repair. Know your cooling limits before you push the machine.

What Does the 19-Page Operators Manual Cover?

Contents include Basic Data (1.1), Dimension Chart (1.2), and twenty sub-sections under Technical Data (1.3). Weights, main dimensions, travel parameters, vibration data, axle specs, brakes, steering, vibratory drum, hydrostatic drives for travel and vibration, hydraulic oil tank, tilting of hood and cabin, cooling system of hydraulic oil, capacities, electrical installation, safety devices, hygienical data, traffic regulation requirements, and accessories. Every spec you need to run the VV 2500 correctly.

3 Sections Every Operator Should Check Before First Start

First, the Safety Devices section (1.3.17) lists all the mandatory safety equipment—horn, backup alarm, seat belt, and emergency stop. If any are missing, you’re not legal to operate. Second, the Capacities section (1.3.15) tells you exactly how much hydraulic oil, engine oil, coolant, and fuel the machine holds. Overfill the hydraulic tank and you’ll blow seals. Underfill and you’ll starve the pump. Third, the Electrical Installation data (1.3.16) gives you the battery voltage, alternator rating, and fuse sizes. That knowledge alone can keep you from frying a controller when you jump-start it wrong.

Operators who skip the manual cost me billable hours.

VV 2500: Technical Data Breakdown

Each subsection under 1.3 is a specific system. Vibration parameters (1.3.4) give frequency and centrifugal force. Hydrostatic Drive of Travel (1.3.10) and Vibration (1.3.11) are completely separate circuits. If you need charge pressure for the hydrostatic drive, cross-reference with the Hydraulic Oil Tank (1.3.12) capacities. The manual is laid out so you find exactly what you need without flipping through irrelevant pages. For related models, check the Stavostroj VV 700, VV 910 2003 Operators Manual – 184 Pages OEM Factory Specs”>Stavostroj VV 700, VV 910 2003 Operators Manual or the Stavostroj VV2010 VV2510 2002 Operators Manual – Factory Specs”>Stavostroj VV2010 VV2510 2002 Operators Manual and Stavostroj VV 1100, VV 1500 2002 Operators Manual – Factory Specs”>Stavostroj VV 1100, VV 1500 2002 Operators Manual.

Electrical Installation: What the Manual Tells You

Section 1.3.16 covers fuse ratings, wire color codes, battery voltage, alternator output, and component locations. This is not a wiring diagram—that’s in the service manual. But for verifying a blown fuse or checking alternator output, it’s all here. The manual also references safety devices and traffic regulation requirements that affect the electrical system. If you need to understand how a Manual Transmission”>Manual Transmission works on other equipment, that’s separate; this machine uses hydrostatic drive. For further reading on manual transmissions, the Manual Transmission”>Manual Transmission article at Wikipedia gives you the basics.

Is this manual for the VV 2500 only?

Yes. Model-specific to the VV 2500 with CUMMINS engine.

Does it include repair procedures?

No. This is the Operators Manual, covering operation, specs, and daily checks. For repairs, you need the service manual.

What kind of electrical data is in section 1.3.16?

Section 1.3.16 Electrical Installation lists fuse ratings, wire color codes, battery voltage, alternator output, and the locations of the main components. It doesn’t include full wiring schematics or troubleshooting flowcharts. For that, you’ll need the separate service manual. However, if you need to check a fuse rating or identify a wire, this page gives you the exact numbers. Combined with the Safety Devices section (1.3.17), you can verify that the roll-over protection and lights are within spec.

How many pages?

19 pages, including the specification manual and operation manual content.

Running a Stavostroj VV 2500 without the factory numbers is a gamble. Don’t gamble. Access the Factory Manual and have the specs where you can see them—on your bench or in your cab.