Description

Soosan SCS1015LSuper 2010 Parts Catalog

If you’re ordering parts for a Soosan SCS1015LSuper 2010 Parts Catalog hydraulic crane without the factory parts breakdown, you’re gambling with your customer’s machine and your own time. Aftermarket diagrams will leave you staring at a wrong seal or a mis-identified boom section. This is the actual 2010 Parts Catalog from Soosan Heavy Industries – 261 pages of assembly drawings and part numbers that match the crane as built.

Boom Assembly Revisions: 2006 through 2009

The BOOM ASS’Y section runs from page 7 through 7-3, covering four separate revisions: June 2006, September 2008, July 2009 (two updates). Each revision gets its own exploded view, so you can match the part number to the exact boom configuration on the machine. Miss one revision and you order the wrong roller or pin. That’s downtime you don’t own.

2-Speed Winch and Planetary Gear Reduction

Section 2-1 covers the 2 SPEED WINCH ASS’Y, and 2-1-1 breaks down the PLANETARY R/G ASS’Y. If you’re replacing a winch motor or rebuilding the planetary set, this is where you find the actual OEM part numbers. The BRAKE ASS’Y is on page 33 – separate from the winch gear, so make sure you reference both when ordering a brake overhaul kit.

Overwinding Alarm and Piping Layouts

Page 73 documents the OVERWINDING ALARM PIPING ASS’Y – added in September 2009. If your crane has that system, you need that page. The PIPING ASS’Y sections (pages 57 through 67-2) cover every hydraulic line: distributor, swing, derrick, telescopic, main winch. Get the wrong pipe or fitting because you used a generic diagram, and you’ll be waiting another week for the right part.

Source Authenticity: OEM Korean Print vs Aftermarket Reprints

This is the factory catalog from Soosan Heavy Industries, printed for the Korean domestic market with English headers. The foreword explicitly states: “Use our company’s product. There is no compensation, if you use another part which is not a our company’s part.” That’s the kind of language you get from an OEM. Aftermarket reprints often crop out revision dates or re-number callouts. This PDF preserves the original page layout including the safety certification mark (F19 111 9) and the 2010.3. revision stamp. For context on why factory documentation matters, see the Automotive Industry Overview and also check the Automotive Industry Overview.

Soosan SCS1015LSuper 2010 Parts Catalog: How to Use It for Ordering

Each assembly is divided into exploded views with numbered callouts. The list below each view gives the part number, description, and quantity per crane. Ordering is straightforward: you give the model name, part name, part serial number, quantity, and upper assembly name. If you skip any of those, the dealer will likely send the wrong part. This catalog eliminates that guess.

Does this catalog include torque specs?

It does not. This is a Parts Catalog, not a service manual. You need the factory service manual for torque values.

How many revision dates are covered in the Boom Assembly?

Four separate revision entries: June 2006, September 2008, and two from July 2009. If your crane was built after a revision cut-in, you must use the corresponding page. Mixing revisions can lead to ordering boom sections that don’t index correctly. The catalog clearly labels each revision with the month and year of change.

Can I use this for a 2011 model year SCS1015LSuper?

This catalog covers revisions up to March 2010. A 2011 model may have further updates. Check the manufacturer’s site for later editions.

I need the service repair manual for this crane. Where do I find it?

Look for the factory service manual separately. Related parts books for similar models are listed below.

For other Soosan crane models, check these factory parts books: SOOSAN SCS876 SCS877 Hydraulic Crane Parts Book, SOOSAN Hydraulic Crane Parts Book SCS736 Series, and SOOSAN Hydraulic Crane Parts Book SAC-2501.

Stop wasting shop time on wrong parts. Access the Factory Manual and get the right numbers on the first order.