Description

SDLG LG930-1 2005 Parts Catalog

I’ve been turning wrenches long enough to know that chasing parts by guesswork costs you time and money. If you’re working on an SDLG LG930-1 wheel loader, you need the OEM parts breakdown, not aftermarket drawings that leave out critical dimensions. This 2005 Parts Catalog is the real deal – 139 pages of factory exploded diagrams and part numbers. The foreword (page 2) tells you the engine has its own separate parts list, so this book covers everything else: torque converter, transmission, steering, brakes, frame, fuel tank, and hydraulics. You get the exact part numbers and quantities from the factory that built the machine.

Page 4 of the catalog shows the full table of contents – sections A through L. Each section is broken into subsystems with individual drawings. For example, the diesel engine system (A1-A2) includes the mounting and governor control, but no engine internals. The torque converter section (B1-B6) covers the converter, drive shafts, and oil filter. This is the kind of reference that keeps you from ordering the wrong seal or bracket.

Diesel Engine System (A1-A2) – What’s Inside

Section A covers the diesel engine system as a whole – the mounting brackets, the governor control linkage, and the air intake components. The catalog gives exploded views of the assembly so you can see how each part fits. The name list on the same page provides the SDLG part number, description, and quantity. If you need a new throttle cable or a mounting bolt, you find it here. The engine itself (short block, head, etc.) is not included – that’s a separate engine manual. But for everything bolted to the engine, this is your source.

Torque Converter and Transmission – Sections B and C

Section B runs from B-1 to B-12: torque converter system, hydraulic torque converter, middle drive shaft, front/rear drive shaft, brackets, and oil filter. Each subsystem has its own drawing. Section C covers the transmission – three shafts (3rd, 4th, 5th) and the transmission assembly in two parts. If you’re rebuilding the transmission or replacing a shaft, the exploded view shows you the bearing arrangement and snap ring locations. The part numbers are factory-sourced, so you can order exactly what came off the line.

Steering, Brakes, and Frame – Sections H, I, J, K

Steering system (H1-H4) includes the steering gear, priority valve, and steering cylinder. The foot brake system (I1-I4) covers the disk brake, brake control valve, air reservoir, air dryer, and brake booster. The hand brake system (J1-J2) is separate. The frame sections (K1-K2) give the front and rear frame weldments – crucial when ordering pivot pins or mounting plates. Section L covers the fuel tank assembly. Every drawing is from the original SDLG engineering files, not a third-party recreation.

Why Factory Parts Catalog Beats Aftermarket Copies

Aftermarket parts catalogs often renumber parts or leave out revisions. This SDLG catalog prints the exact part numbers used at the factory in 2005. The foreword explicitly warns that specifications can change without notice, and to confirm the manufacturing date and batch number of your loader. That’s the kind of detail you don’t get from a generic PDF. When you order a part using this catalog, you’re ordering what the OEM designed. The loader industry follows standards from the Automotive Industry Overview and Automotive Industry Overview for part numbering.

If you also work on larger loaders, check the SDLG LG953 Wheel Loader Parts Catalog for similar exploded views. For the LG938L, see SDLG LG938L Wheel Loader Parts Catalog – Section: 发动机系统 (Diesel Engine System). For older equipment, the Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide covers fastener specs.

Who Needs This Catalog?

This is for anyone who owns or maintains an SDLG LG930-1 wheel loader. If you’re a shop mechanic, you’ll use it to look up part numbers for repairs. If you’re an owner-operator, it helps you order the right parts without relying on a dealer’s interpretation. The catalog is 139 pages – not a massive tome, but every page is useful. You don’t have to guess which bolt fits the steering cylinder; the drawing shows it.

One thing I appreciate: the book uses a consistent numbering system with callouts on the drawings. The name list is on the same page or facing page, so you don’t flip back and forth. That’s efficient when you’re covered in grease.

Does this catalog include engine parts?

No. The foreword states the engine has its own separate parts list.

How do I use this catalog to order a part?

To order a part, locate the assembly drawing for your machine’s component (e.g., transmission, steering cylinder). Each drawing has numbered callouts. Refer to the corresponding name list on the same page or facing page. The list provides the official SDLG part number, part name, and quantity. When ordering, provide the part number and the loader’s manufacturing date and batch number (found on the machine’s identification plate) to ensure correct revision. The catalog notes that specifications can change without notice, so always verify with the latest revision. This is especially important for critical fasteners and hydraulic components.

If you’ve been working without a factory parts catalog, you’re wasting time and risking wrong parts. Get the OEM reference for your SDLG LG930-1. Access the Factory Manual now.