Description

Schäffer 550 2001 Parts Catalog – OEM Factory Spare Parts List

If you’re wrenching on a Schäffer 550 telescopic loader from the 2001 model run, you’ve already burned time chasing mismatched aftermarket parts. The 550 uses a mix of hydraulics, drivetrain, and cab components that look interchangeable but aren’t. That’s where this factory Parts Catalog comes in – 64 pages of OEM exploded views and exact part numbers, straight from Schäffer’s 2001 release. No guesswork, no cross-reference headaches.

64 Pages of Exploded Views and Part Numbers

This is a factory parts catalog, not a repair manual. You won’t find torque specs or step-by-step overhaul procedures here – what you do get are clear, scaled drawings with each component labeled by part number. The TOC lists 27 separate sections covering every major system on the 550. For the steering system alone, there are two variants: Lenkhydraulik 550T and Lenkhydraulik 550TS. The catalog gives you the correct part for each chassis code.

Hydraulikfilter and Steering – What You Can Look Up

Section 6 covers the Hydraulikfilter. Section 7-1 and 7-3 split the steering hydraulics between the 550T and 550TS models. If you need the filter element for the hydraulic return line or the complete steering cylinder, the drawing shows the exploded assembly and the corresponding part number. Same for the Arbeitshydraulik (working hydraulics) in section 8 and the Fahrpedale (drive pedals) in section 15.

Why an OEM Parts Catalog Beats Aftermarket Cross-Reference Lists

Aftermarket parts lists rely on generic dimensions and hope. This catalog was published in 2001 by Schäffer themselves. Every part number is verified against the factory drawings. The PDF includes three languages – German, English, French – so you can cross-check terms. Page 5 shows the full Inhaltsverzeichnis (table of contents) with all 27 chapter headings. Automotive Industry Overview I’ve seen aftermarket catalogs bundle parts from multiple model years into one list and sell it as “fits all.” That’s a waste of your time and money. This is the one printed for the 2001 model year production.

Audience Fit: Who Needs This 2001 Parts Catalog

Home garage owners who rebuild their own equipment will get the most out of this. If you own a Schäffer 550 and need to order a new hydraulic filter, a steering column assembly (Lenksäule, section 21), or a cab window seal (K 1.3 Frontscheibe), the exploded drawing shows you exactly which bolt, gasket, or bracket to order. Professional mechanics working on a customer’s 550 can use this to pull part numbers without flipping through a dozen online forums. Beginners: do not expect repair instructions. This is strictly a parts identification tool. Pair it with a factory service manual for assembly steps.

3 Systems Covered in This Catalog

The TOC shows deep coverage: Hydraulics (sections 6, 7, 8, 9, 10), Engine bay and fuel (Motorhaube 16, Motorlager 22, Kraftstoffanlage 23, Schalldämpferanlage 24, Luftfilteranlage 25), and Drivetrain/frame (Rahmen 17, Teleskoparm 18, Achsen 27-1, 27-2, 27-3). The cab section (Kabine Dieteg) runs from K 1.1 Rahmen to K 1.9 Schalldämmung – that includes doors, front and rear windows, the seat pan, heater, and sound insulation. If you need to replace a cab part, the drawing shows the exploded view with reference numbers.

Wiring and Electrical: Batterie/Leuchten and More

Section 19 covers Batterie/Leuchten – battery and lights. For the 550, the battery tray, hold-down clamp, and light assemblies are shown with part numbers. The electrical system is minimal on these loaders, but having the correct bulb or starter cable part number saves a trip to the dealer. Aftermarket catalogs often substitute a generic battery clamp that doesn’t fit the 550’s frame bracket. The factory drawing eliminates that issue.

Related Manuals

• Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List
• Schäffer 3026 3033(S) Parts Catalog 2005 – AutoRepairManuals
• Schäffer 4042, 4048 2006 Parts Catalog – OEM Factory Spare Parts List

Frequently Asked Questions

Is this a repair manual or a parts catalog?

Parts catalog. Exploded views and part numbers only – no torque specs.

What models are covered?

The 2001 Schäffer 550, including both 550T and 550TS variants, as shown in sections 7-1/7-3, 10-1/10-3, 17-1/17-2, 22-1/22-2, 23-1/23-3, 24-1/24-2, and 25-1/25-2.

Can I use this to look up torque specs?

No. This catalog does not contain any torque values or service procedures.

How do I find the exact part number for my machine?

Look at the exploded drawing in the relevant section. Each component has a reference number that corresponds to a part number in the list below the drawing. Match the reference number to the part number. Then check your machine’s model variant – 550T or 550TS – because some parts differ between the two. The catalog clearly separates these variants in sections like Lenkhydraulik (7-1 vs 7-3) and Fahrhydraulik (10-1 vs 10-3). If you have the serial number plate on your loader, compare it to the model designations shown on page 1. The PDF is searchable, so you can also type a keyword like “Hydraulikfilter” and jump to section 6.

If you’re tired of ordering wrong parts for your Schäffer 550 telescopic loader, this 2001 factory parts catalog gives you the correct part numbers on the first try. 64 pages of drawings, every system from hydraulics to cab trim. Stop guessing and start ordering what actually fits. Access the Factory Manual from AutoRepairManuals today.