Description

Schäffer 5090Z, 5070Z 2007 Parts Catalog

You’ve spent two hours matching a hydraulic cylinder by eye because the aftermarket parts list you obtained had the wrong bore size. That wasted time adds up – and so do the return shipping fees. A parts catalog is not a repair manual, but without accurate factory diagrams you’re guessing. This Schäffer 5090Z, 5070Z 2007 Parts Catalog gives you the exact OEM exploded views and part numbers so you order once.

Parts Catalog, Not a Service Manual – Know the Difference

This is a spare parts list, not a step-by-step repair guide. It covers every replaceable component on the Schäffer 5070Z and 5090Z loaders built through 12/2007. Each chapter groups related parts – from the steering cylinder (Lenkzylinder) all the way to the hardtop upgrade kits. If you need torque specs or removal procedures, you want the service manual. But if you’re trying to figure out why the new lift cylinder doesn’t match the mounting tabs, this catalog is what you need.

What the 117 Pages Cover – From Lenkzylinder to Verdeck

Chapters are numbered E1 through E35 for standard equipment, plus S18 for optional tool holders, K1 for the Dieteg cabin, and V1 for the hardtop. Every hydraulic component has its own section: E1 Lenkzylinder (steering cylinder), E2 Hubzylinder (lift cylinder), E4 Werkzeugzylinder (tool cylinder). You also get the steering hydraulics (E7), drive hydraulics (E10), and the brake system (E30). The last chapters cover adhesive labels and optional upgrades. See the full table of contents on the product page.

Steering Cylinder and Hydraulics – Chapter E1 to E10

That steering cylinder you need to rebuild? Chapter E1 shows the exploded view with every seal, piston, and gland part numbered. Same for the lift cylinder in E2. I’ve seen guys order a whole steering cylinder assembly when all they needed was a $6 wiper seal – because the third-party diagram had the wrong breakdown. This catalog labels each subcomponent with its Schäffer part number. For hydraulic filter elements, check E6; the part number there matches the original Donaldson or Mann filter cross-references.

Engine Components and Mounting – Chapter E22

Chapter E22 covers engine mounting and clutch parts. Whether your 5090Z needs motor mounts or a clutch release bearing, the factory diagram shows exactly how everything bolts together. The catalog also lists the clutch disc and pressure plate part numbers. Don’t rely on memory – verify the part number against your engine serial number range. Schäffer sometimes updated parts mid-production; the 2007 revision includes supersession notes.

Why OEM Beats Aftermarket for Parts Identification

I’ve torn my hair out over aftermarket parts catalogs that lump several years together and leave out critical details like thread pitch, o-ring sizes, or bolt lengths. This is an original Schäffer factory document, printed in 2007, scanned from the OEM binder. Every part number was verified by the manufacturer. When you compare the steering cylinder seal kit part number here against a generic kit, you’ll see the difference. The automotive industry has moved toward standardized part numbering, but Schäffer uses their own system – and this catalog gives you that system raw.

Audience Fit – Who Needs This Catalog

If you own a Schäffer 5070Z or 5090Z loader, and you’re tired of cross-referencing part numbers from worn-out parts, this is for you. It’s also useful for equipment dealers and rental yards that need to stock the right rebuild kits. Beginners should note: this is not a repair manual. You need to know how to read an exploded view and find part numbers. Advanced DIYers will appreciate the cable harness diagrams in chapter E20 and the axle sections E27.1 through E27.4.

Source Validity – Factory Print, Not a Reprint

This is the exact PDF of the original Schäffer binder dated 12/2007. No third-party compilation, no generic diagrams. The 117 pages match the OEM page numbering. If you’ve bought aftermarket catalogs that cut off part numbers at the fold line, you know why the original matters. The Automotive Industry Overview covers how OEM documentation ensures traceability – same principle here.

Does this catalog include part numbers for the engine?

Yes, Chapter E22 covers engine mounting and clutch parts.

How do I verify part numbers from this catalog against my machine?

Cross-reference the diagram number with the machine’s serial number. Schäffer often revised components mid-production. The 2007 catalog covers both 5070Z and 5090Z models up to that year. If your loader’s serial number falls outside the range listed in the intro notes, you’ll need the next revision. I’ve seen technicians order the wrong hydraulic cylinder because they used a third-party parts list. This OEM catalog gives you the exact old and new part numbers, plus supersession notes. Always check the ‘Ersatz’ column for replacement part numbers.

Related manuals you may need: Schäffer 690T 5090Z Spare Parts List, Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List, and Schäffer 3026 3033(S) Parts Catalog 2005 – AutoRepairManuals.

Stop hoping your local parts house guesses the right seal kit. Access the Factory Manual and start ordering parts that fit the first time.