Description

Schäffer 3036, 3036S, 3045 2007 Parts Catalog

If you’re pulling a steering cylinder off a Schäffer 3036S and the parts numbers you’ve got from some aftermarket site don’t match the casting marks, you know the headache. Hours wasted cross-referencing, ordering the wrong seal kit, machine down. That’s why this factory Schäffer 3036, 3036S, 3045 2007 Parts Catalog exists. 2007 publication, 189 pages, printed original. Not a reprint, not a scan of a third-party copy—direct from the loader builder. I’ve used enough of these to tell you: when the part number is wrong, the truck doesn’t move.

The catalog groups everything by chapter. Steering cylinder, lift cylinder, tool cylinder—chapters E1, E2, E4. Each includes exploded-view diagrams with the OEM number stamped next to every seal, piston, and fitting. Page 73 shows the hydraulic control unit (E9). You want the charge pressure relief valve part? It’s there. But the real value is in the details that aftermarket catalogs skip: torque specs for banjo bolts, thread sizes for the steering cylinder ports, and the exact O-ring cross-sections. I don’t trust a generic parts lookup for a loader that’s 15 years old. This catalog removes the guesswork.

Engine and Clutch: Chapter E22

Engine mounting and clutch assembly are covered under chapter E22. The 3036, 3036S, and 3045 share many engine components, but the mounts differ by chassis variant. This catalog gives you separate part numbers for the 3036 and the 3045 engine brackets. You’ll also find the clutch disc, pressure plate, and release bearing numbers—all in one list. I’ve seen guys order the wrong throwout bearing because they used a generic parts interchange database. Three days lost. This book stops that.

Hydraulic Cylinder Breakdown: E1, E2, E4, E7

Four chapters dedicated to cylinders and steering hydraulics. Steering cylinder (E1) includes the rod seal kit with numbers for the wiper seal, U-cup, and backup rings. Lift cylinder (E2) has the port block and check valve parts. Tool cylinder (E4) covers the quick-attach hydraulics. And steering hydraulics (E7) lists the orbital valve, priority flow divider, and all hose part numbers. If you’ve ever had a drift in the loader arms because a seal failed, you know you need exact replacements. This catalog delivers that.

7 Systems Covered in the Optional Equipment Section

The S chapters (starting S8.1) cover tandempump, additional oil cooler, ROPS safety roll bar, tool holder variants, and hydraulic tool locking. If your 3036S has the optional hydraulic tool locking (S18.2), the part numbers for the actuators and control valves are in there. The ROPS bar hardware? S16.1. The catalytic converter on the exhaust? That’s in E24. This catalog doesn’t make you hunt through twenty tabs—it’s laid out by system with clear chapter numbers.

Does This Manual Cover the Cab and Hardtop?

Yes—chapters K1.1 through K1.11 cover the Dieteg cabin: doors, heating system (K1.6), sound absorption, steering console, and switch console. The hardtop section (V1.1 to V1.4) includes upgrade kits for adding a roof. You want the part number for the cab rear window? Chapter K1.1. The door hinge pin? K1.5. That level of detail is why this beats any third-party catalog.

Who Should Use This Parts Catalog

If you own a Schäffer 3036, 3036S, or 3045 loader—whether in a construction yard, farm, or rental fleet—this catalog is for the person who orders parts. DIYers who rebuild hydraulics themselves need it. Shop owners who want their techs to stop ordering wrong parts need it. The exploded views use German and English descriptions, so no translation headaches. But you still need basic mechanical understanding—this isn’t a repair manual, it’s a parts book.

Source Authenticity: Why OEM Beats Aftermarket

Aftermarket parts catalogs often re-index parts from multiple manufacturers and lose the supersession history. This is a 2007 factory publication, meaning it lists parts as they were originally shipped. The Schäffer 3036 series had updates over the years—early models use a different steering cylinder than late 2006 models. This catalog captures the 2007 configuration. I’ve seen aftermarket sites list the wrong steering seal kit for a 2005 3036 because they used a generic database. Stops here.

Related manuals you might need: Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List for the larger loader; Schäffer 3026 3033(S) Parts Catalog 2005 – AutoRepairManuals for the smaller chassis; and Schäffer 4042, 4048 2006 Parts Catalog – OEM Factory Spare Parts List for the heavy-duty line. For background on loader designs, see Automotive Industry Overview or Automotive Industry Overview for context on hydraulic systems.

Can I use this catalog to rebuild the entire steering cylinder?

If you have the cylinder on the bench, yes. The catalog gives you every part number for seals, pistons, rods, and hardware. But you still need a repair manual for torque specs and disassembly steps. This parts list stops at the part numbers and exploded views.

Does it include the engine parts for the 3036S diesel?

Engine mounting and clutch—yes. Internal engine components like pistons, rings, and bearings are not listed because this is a loader parts catalog, not an engine overhaul manual. For the engine itself, you’ll need the engine manufacturer’s parts book. But the fuel system (E23), exhaust (E24), air cleaner (E25), and cooling system (E26) are fully covered.

Access the Factory Manual now and stop wasting time on parts that don’t fit. This is the original 2007 Schäffer 3036, 3036S, 3045 Parts Catalog—189 pages, OEM verified, ready to use.