Description

Schäffer 2033(S) 2007 Parts Catalog – OEM Factory Spare Parts List

If you are ordering parts for a Schäffer 2033(S) loader and the dealer keeps sending the wrong seal kit or steering cylinder, it is because the aftermarket catalogs are garbage. I have seen it a hundred times in my shop – a guy buys a “replacement” part from a third-party list, and it does not fit because the part number was approximated. This Schäffer 2033(S) 2007 Parts Catalog is the exact OEM factory print that Schäffer mechanics used in 2007. 85 pages of exploded diagrams, Schäffer part numbers, and cross-references to the actual hydraulic and mechanical components. No reprints, no aftermarket guesswork.

7 Major Hydraulic Systems – Part Numbers You Can Trust

The catalog breaks the loader down by system. Chapters E1 through E10 cover every hydraulic circuit: Lenkzylinder (steering cylinder), Hubzylinder (lift cylinder), Werkzeugzylinder (tool cylinder), Hydraulikfilter (oil filter head), Lenkhydraulik (steering hydraulics), Arbeitshydraulik (work hydraulics), Steuergerät (control valve block), and Fahrhydraulik (drive hydraulics). Each page shows the exploded view and the corresponding Schäffer part number. Need the steering cylinder seal kit? Flip to chapter E1 and get the number off the page. No clicking through three websites to cross-reference a generic seal.

Engine and Drivetrain – Motorlager, Kupplung, and Axles

Chapters E22 through E29 cover the mechanical bones: Motorlager / Kupplung (engine mounts and clutch), Kraftstoffanlage (fuel system), Auspuffanlage (exhaust), Luftfilteranlage (air intake), Wasser- / Ölkühler (radiator and oil cooler), Vorderachse (front axle), Hinterachse (rear axle), and Achsen / Bereifung (axles and tires). The part numbers here are critical – a wrong engine mount bolt or a mis-specified axle seal will put the machine down for days. This catalog uses the same numbering as the Schäffer factory line. Cross-reference to a genuine Schäffer dealer and the part arrives correct.

Cabin and Special Equipment – Dieteg Type 2033 and Optional Kits

Special equipment sections S8.1 through S18.4 cover the Zusatz-Ölkühler (additional oil cooler), ROPS-Bügel (roll-over protection), Werkzeugaufnahme EU-WS (European tool carrier), and hydraulic tool locking. The cabin section for Dieteg Type 2033 (K1.1 through K1.11) includes everything from the door glass to the Schalldämmung (sound deadening). If you need a right-side cabin door seal or the heater blower motor, the part number is in this catalog. No hunting through a 200-page aftermarket PDF that rearranged the numbering.

Does This Catalog Include Torque Specs?

Short answer: no. This is a parts catalog, not a service manual. It lists part numbers, quantities, and exploded views. If you need torque values for head bolts or hydraulic fitting tightening sequences, you need the Schäffer service manual. But for ordering the correct seal, bearing, hose, or filter, this is the only document you should trust.

Why OEM Documentation Beats Aftermarket Catalogs

Aftermarket parts catalogs for loaders like the 2033(S) often use generic part numbers that map to multiple manufacturers. One aftermarket list I saw used a Bosch Rexroth seal number for the steering cylinder that did not match the Schäffer cylinder bore. The OEM catalog has the exact Schäffer number. If you order using the OEM part number, the dealer will ship the correct part. That alone saves you the return shipping fee and the downtime. For a shop running a six-bay operation, that is billable hours lost.

3 Reasons to Keep This PDF on Your Shop Tablet

1. **85 pages of factory-exploded diagrams** – each part is shown in relationship to the assembly, so you can verify quantity and orientation before you order.
2. **OEM Schäffer part numbers** – cross-reference directly to the dealer’s inventory. No translation needed.
3. **Coverage of the 2033(S) with both standard and special equipment** – from the basic loader to the ROPS cab and hydraulic tool locking.

I have bought aftermarket parts lists that claimed to cover the Schäffer 2033(S) but omitted the Zusatz-Ölkühler and the Dieteg cabin sections. Those sections are critical if you are working on a machine with the factory cab. This catalog includes them in full.

Reference: Related Manuals on AutoRepairManuals

If you also need the service procedures for the 2033(S), you will want the factory service manual. Check the related listings: Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List for the larger 900-series loader, and Schäffer 3026 3033(S) Parts Catalog 2005 – AutoRepairManuals for the predecessor models. For a parts catalog covering the 4042 and 4048 models, see Schäffer 4042, 4048 2006 Parts Catalog – OEM Factory Spare Parts List.

For background on how OEM parts catalogs support the automotive industry, you can read the Automotive Industry Overview and also check Automotive Industry Overview for context on supply chain accuracy.

Does this catalog include hydraulic hose part numbers?

Yes. Each hose assembly is drawn and numbered in the relevant hydraulic chapter (E6, E7, E8).

How do I use the catalog to find a part if I only have the machine serial number?

The catalog does not index by serial number; it indexes by assembly chapter. Find the chapter that matches the system (e.g., E27 for front axle), look at the exploded diagram, and identify the part by visual match. Then locate the part number in the adjacent list. If you are unsure which chapter covers a component, start with the table of contents on page 5. The chapters are grouped by system, not by serial range, because Schäffer used a single parts list for the entire 2033(S) production run in 2007.

If you are tired of ordering the wrong hydraulic cylinder or seal for your Schäffer 2033(S), stop relying on third-party approximations. Access the Factory Manual – the OEM 2007 parts catalog with 85 pages of verified Schäffer numbers. One access, one correct part, no return shipping.