Description

Schaeff HR16 2007 Parts Catalog

You need a part number – not a guess, not a “this looks like it fits” from some forum. That mistake costs you a day of downtime and a return shipping label. The Schaeff HR16 2007 Parts Catalog – 242 pages – is the only document that lists every OEM number for the mini excavator. No aftermarket translation errors. No missing diagrams. I have seen guys order a dozer blade pin from a third-party listing and end up with a bolt that’s 2 mm too short. That doesn’t happen when you pull the number off page 3 of this catalog.

Undercarriage and Dozer Blade Assembly – Group 1.001

First section of the catalog breaks down the undercarriage and front dozer blade. You get drawing numbers, sheet references, and the exact OEM part identifier for each component: pin, nut M8, bolt M10x75, shim 40x50x1. The dozer blade itself comes in two variants – standard and 1500 mm long. Without the factory print, you wouldn’t know there are two blade options. Page 3 shows the diagram for this group. Use it to verify which blade your machine carries before ordering.

Slewing Mechanism – Group 1.002

Rotary connection, grease nipple M10x1 with 90° angle, hose assemblies, pipe lines. This section covers everything that lets the upper structure rotate. The part numbers are straight from Schaeff’s inventory system. One missed digit and you get a hose that’s 50 mm too short. That’s a full afternoon of bleeding the system. The catalog lists the rotary connection under Ident Nr. 5609661440 – that number is locked to the HR16 chassis.

3 Reasons to Choose OEM Documentation Over Aftermarket

Aftermarket parts catalogs re-package the same data with errors. They drop sheet numbers, omit supersessions, and sometimes use generic images. The 2007 Schaeff HR16 Parts Catalog is the original factory printout dated 02.02.2007. Every part group (Baugruppe) is stored as Schaeff intended – group 1.001, 1.002, etc. If a bolt was superseded, the factory note appears in the memo column. You don’t get that from a PDF that was scanned from a photocopy of a photocopy. Automotive Industry Overview might explain why OEM data matters, but I’d rather you just look at the part numbers yourself.

Does This Catalog Include Wiring or Hydraulic Diagrams?

It’s a parts catalog, not a service manual. You get exploded views of assemblies, part numbers, quantities, and units. No wiring schematics, no step-by-step rebuild procedures. If you need the parts list to order the right seal kit for the hydraulic pump, this is it. If you need torque specs for the swing gear, you need the full service manual – but you still need this catalog to know which fastener you’re torquing. The two documents work together.

Audience – Who Needs This 242-Page Document

Owners of the Schaeff HR16 mini excavator who do their own maintenance. Independent mechanics who service compact construction equipment. Rental yards that need to keep a fleet of HR16 machines running. The catalog is bilingual – German and English – so you get both the original German terms and the English translations. That helps when you’re calling a supplier and they ask for a “Dichtung” instead of “gasket.” The page count runs 242, and every one of them is packed with OEM information you can’t get from a third-party database.

Get the Right Part Number – Every Time

You have a torn hose on the rotary connection. You pull group 1.002, find item 10: Schlauch / Hose, Ident Nr. 0188805542. Order that exact number. No cross-referencing to a generic hose. No wondering if it’s the right length. This catalog removes that uncertainty. If you work on HR16 machines regularly, keep a printed copy or the PDF on your tablet. The Terex Schaeff SKL 871 1997 Parts Catalog – OEM Factory Manual covers a different model, but the same logic applies – OEM numbers are irreplaceable. Also check the Terex Schaeff SKL 861 1997 Parts Catalog – Factory OEM and Terex Schaeff SKL 861 1994 Parts Catalog – OEM Specs if you work on those machines.

What kind of parts are covered in this catalog?

Undercarriage, dozer blade, slewing mechanism, hoses, pins, nuts, bolts, and all related hardware for the HR16.

Is it in English or German?

Both. The original printout is in German with English translations in every row (Designation of part). You can read either language.

Can I use this catalog to find torque specifications for the track adjuster?

No. This is a parts catalog – it lists part numbers and quantities only. You need the Schaeff HR16 service manual for torque values and adjustment procedures.

The part number I need appears in the catalog but the diagram is blurry – how do I confirm the shape?

The catalog includes drawing numbers and sheet numbers for each assembly. Look up the drawing number (e.g., 1.001) on the corresponding sheet – those are clean line drawings, not photos. If the digital version is scanned, zoom in; the original printout was sharp. Otherwise call Schaeff with the drawing number and they can verify.

Order the wrong part once – you remember the cost. Order from the factory catalog and you stop guessing. Access the Factory Manual from AutoRepairManuals today and keep the HR16 running on OEM numbers.