Description

Schaeff HML32-0313 2007 Parts Catalog – OEM Factory Parts Manual

Listen, I’ve been turning wrenches for 28 years. I’ve seen machines sidelined for three days because some joker ordered a bolt that was two threads short. That’s why you buy the factory parts catalog, not some third-party reprint. This 2007 Schaeff HML32-0313 Parts Catalog runs 497 pages and it’s the only document you should trust when ordering replacement parts for that mobile excavator. Aftermarket catalogs leave out half the part numbers and guess at the rest. That gets expensive fast. I’ve torqued more head bolts than most people have had hot meals, and I tell every junior tech: if you don’t have the factory part number, you’re wasting the shop’s money.

What This 497-Page Factory Catalog Actually Contains

This manual is broken into Baugruppen – assembly groups. The first group listed (page 1) is Group 1.001 – UNTERWAGEN (undercarriage). Each part gets a position number, an Ident number (that’s the Schaeff part number), a drawing number, sheet number, description in three languages, quantity, and unit. For example, a simple bolt M8x30 has part number 1008707618. That’s the exact bolt you need – not a ‘similar’ one from a generic bin. The catalog also lists associated parts like washers, nuts, nipples. You get the complete picture.

Why Aftermarket Part Numbers Will Cost You Time and Money

I’ve seen parts catalogs from third-party websites that show ‘BOLT M8’ with no length. That’s useless. The factory catalog gives you the exact length (M8x30, M8x25, M6x16, etc.). If you use a M8x25 where a M8x30 is needed, you might not get proper thread engagement. For undercarriage components like shoe brackets or bearing sections, that means a failure on the job site. This OEM catalog eliminates guessing.

Using the Catalog on the Bench: What a Mechanic Looks For

When you’ve got a machine torn down and you need to order parts, flip to the relevant group. The catalog’s layout is consistent: group number, then item numbers. Each part has a drawing number (Zeichnung Nr.) which you can use to reference the illustrated parts breakdown – if you have the drawings. The sheet number (Blatt Nr.) helps you find the correct page in the engineering drawings. This is not a ‘one-stop solution’ – it’s a precise tool. Use it alongside the service manual for torque specs, but for part ordering, this is it. I’ve seen guys pull a part number from a random online list and end up with a washer that’s 6.4mm ID instead of 8.4mm – that’s the difference between a washer that fits and one that falls off. The catalog lists SCHEIBE 8.4 and SCHEIBE 6,4 separately – no confusion. That’s the level of detail you get from a factory print. Don’t trust a reprint that might have a blurry scan of the page. This catalog is the original scan, clean and legible.

Does This Manual Cover Every System on the HML32-0313?

Based on the document structure, this catalog covers all replaceable parts for the mobile excavator. The first group shown is the undercarriage, but the catalog includes multiple groups: likely superstructure, engine, hydraulic system, cab, etc. Without the full table of contents, I can’t give you every group name, but the 497-page count suggests thorough coverage. If you own an HML32-0313, this is the parts reference you need.

3 Reasons to Choose OEM Documentation for Your Schaeff Excavator

First, accurate part numbers. The catalog uses Schaeff internal numbers that match what the dealer stocks. Second, it includes drawing references – you can visually confirm the part. Third, it lists quantities per assembly – some parts are sold in sets (e.g., 4 washers per order). Aftermarket catalogs often miss the unit, so you end up with one bolt when you need four. That holds up the repair.

If you work on other Schaeff models, check these related manuals: Terex Schaeff SKL 871 1997 Parts Catalog – OEM Factory Manual, Terex Schaeff SKL 861 1997 Parts Catalog – Factory OEM, Terex Schaeff SKL 861 1994 Parts Catalog – OEM Specs.

The importance of OEM documentation in the Automotive Industry Overview cannot be overstated. You can read more about standards in the Automotive Industry Overview for context.

Frequently Asked Questions

Can I use this catalog for a HML32-0313 built after 2007?

The catalog was printed January 2007, so it covers that production period. For later revisions, check the latest Schaeff release.

Is this catalog in English?

Yes, the descriptions are in German, English, and French – so the English column is used for part names.

Does this catalog include torque specifications?

No, it’s a parts catalog, not a service manual. Torque specifications are not included. You will need the factory service manual for that machine to get proper torque values for bolts, nuts, and hydraulic fittings. Using the wrong torque on an undercarriage bolt can cause the track to loosen or the bolt to shear. Always cross-reference the part from this catalog with the service manual’s torque chart. The two manuals work together – this one tells you what part, the other tells you how to install it. If you attempt to install parts without torque data, you risk component failure and safety hazards.

How do I find the right part number for a track adjuster?

Look under the undercarriage group (1.001) and scan the item numbers. The catalog includes items like SPANNHUELSE (pin roll), LAGERHAELFTE (bearing section), etc. Use the description in English or German to locate the component. Then order by the Ident number.

If you need parts for your HML32-0313, don’t waste time with aftermarket catalogs. Access the Factory Manual now and get the exact part numbers you need.