Description

Sandvik QS441 Parts Catalog

You run a QS441 in the field or you’re rebuilding one after a long season. The wrong part number means a week of downtime while you wait for a return and the correct replacement. I’ve seen it happen. Shops order a Sandvik QS441 Parts Catalog from me because they’re tired of guessing. This is the factory document – 128 pages of exploded assembly drawings with each part labeled by Sandvik’s own part numbering system. Not a third-party re-draw. Not a photocopy. Original PDF, exactly what the Sandvik parts desk uses.

Fuel Tank Assembly Breakdown (Page 52)

Page 52 shows the fuel tank assembly with every line, fitting, and bracket. Need to order a cap, sender unit, or the tank itself? The exploded view gives you the exact Sandvik part number. No cross-referencing a generic catalog. You see the fuel pump assembly later in the manual – separate section – so you don’t confuse the tank parts with the pump kit. If you’ve ever ordered a tank when you needed a pump, you know why this matters.

128 Pages of Exploded Views

Chassis, tank tower frame, chamber kits (medium coarse and extra coarse), drive guard, tension system, rear return manifold, rear case drain manifold, hydraulic tank fittings, maintenance platform, main conveyor, front return manifold, hydraulic tank sub assembly, ladders, front jacking leg, control cabinet, radio remote control, hydraulic pipe kit, hydraulic valve, machine lighting kit option, lubrication tank, feeder conveyor, drive unit, hopper extensions, metal detector brackets, feeder hopper, crusher lubrication tank, water pump kit, magnet frame assembly, magnet assembly, fuel pump, stockpile sensor, auto lubrication kit, additional guarding, conveyor guards, and tool kit. Every single assembly gets its own exploded diagram with callouts. That’s how you verify you’re ordering the right valve – not a similar-looking one from a different model.

Questions About Ordering the Correct Parts?

You need a chamber kit for your QS441. The manual lists two options: Medium Coarse and Extra Coarse. If you order the wrong one, the crusher won’t close properly and you’ll chew through liners. The exploded view on page 16 (Medium Coarse) and page 20 (Extra Coarse) shows each liner, wedge, and bolt. Compare the wear pattern from your old chamber to the diagram. It’s that direct.

Valve Components – Know Before You Order

Hydraulic valve assembly is a common headache. The manual breaks down the valve body, spools, seals, and solenoids. Not a generic schematic – Sandvik’s own drawing. Use it to identify which O-ring you need before you pull the valve. Nothing worse than opening a box expecting a seal kit and getting the wrong size. The parts catalog prevents that waste.

Source Authenticity – Factory PDF vs Aftermarket

Aftermarket parts catalogs for Sandvik equipment often re-draw images and renumber parts to match their own inventory. That’s fine if you only buy from them. But if you need a genuine Sandvik part, you must use the factory part number. This catalog is the PDF that Sandvik issued in 2015. Every page is a direct scan – no reprints, no third-party redaction. The file name on the original is SANDVIK_QS441_Parts_Catalog_en-43414007190.pdf. That’s the serial number you can check against Sandvik’s internal system. I don’t trust any other source for part numbers on a cone crusher this size.

Related Manuals

• Sandvik DE710 Parts Catalog – OEM Factory Specs & Exploded Views
• Sandvik LH203 2010 Operators Manual – Factory Specs & Safety
• Sandvik QI240 Operators Manual – 258 Pages Factory Safety & Operations

For background on the importance of using factory documentation in heavy equipment repair, see the Automotive Industry Overview and Automotive Industry Overview – the same principles of exact specification apply off-road.

Does this parts catalog include torque specs for reassembly?

No. This is a parts catalog, not a service manual. It shows exploded views and part numbers only. You need the separate service manual for torque values and procedures.

Can I use this catalog to order parts for a QS441 that has been modified with aftermarket components?

The catalog lists only genuine Sandvik parts as originally manufactured. If someone replaced the hydraulic valve with a non-Sandvik unit, the part numbers won’t match. You’ll need to track down the aftermarket manufacturer’s ID. However, if you’re restoring the machine to factory spec, this catalog gives you every original part number including every seal, bolt, and bracket. That’s over 128 pages of detailed breakdowns covering the entire machine from the crusher lubrication tank to the radio remote control. Using it alongside the original machine serial number ensures you get the correct OEM components for your specific chassis variant.

Stop wasting money on wrong parts and lost time. Access the Factory Manual today.