Description

Ricoh Aficio 200, DF43, PT200, AD330, PS330 1997 Parts Catalog

Ordering the wrong part because some aftermarket list was missing a revision code or didn’t show the bracket orientation? I’ve been that guy too. When you’re elbow-deep in a Ricoh Aficio 200 or one of the DF43 feeder units, guessing the part number costs billable hours and sometimes a return shipping fee. That’s why this factory Parts Catalog from 1997 gets a spot on my bench. It covers the Aficio 200 (A193), DF43 (A628), PT200 (A629), AD330, and PS330 – five machines in one 185-page binder. No photocopied garbage, no third-party renumbering. This is the OEM document that Ricoh’s own parts counter used.

185 Pages of Factory Parts Data

Opens with the Aficio 200 (A193) section. Table of Contents lists every subassembly – Exterior 1, Exterior 2, Platen Cover, Operation Panel, By-pass Feed Table, Paper Tray, Registration, Paper Feed Section, Optics Section 1 and 2, Laser Unit, Toner Hopper Unit, P.C.U., Fusing Unit, Paper Exit Section, Transport 1 and 2, Drive 1 and 2, Electrical Section 1 and 2, Frame 1 and 2, BICU Board (separate listings for 115V and 230V models), IOCSS Board, Decal and Document, and Special Tools. Each section gives you exploded-view illustrations with callouts matching the Parts Index at the end. Need the exact feed roller part for the DF43? Section 3 – Paper Feed Unit (A628) – gets you there.

For the PT200 1-Bin Tray, the exploded diagram shows the paper path and the latch springs. All callouts tie back to the index. That’s the difference between a parts catalog and a brochure.

Electrical Section 1 and 2: Tracing Parts on the Board

Electrical Section 1 (A193) covers the main harness routing, connectors, and board locations. Electrical Section 2 continues with the power supply and motor drivers. If you’ve ever swapped a BICU board without the correct part suffix, you know the machine won’t even power on. Both BICU Board sections (115V and 230V) list the exact board part numbers. Same for the IOCSS Board – separate listings for each voltage variant. That level of detail keeps you from ordering the wrong revision.

What Does the DF43 Section Cover?

The DF43 (A628) section is four sections: Exterior, Paper Feed Unit, Paper Exit Section, Electrical Section. The Paper Feed Unit shows the pickup roller, separation roller, and all springs. The Electrical Section has the main and sub PCBs. If you’re troubleshooting a misfeed on the Aficio 200 with the DF43 attached, you can verify the part before pulling the old one.

AD330 and PS330 are included as well – both are accessory units for the Aficio series. The catalog treats them with the same exploded-view format. No guesswork.

Verify Part Numbers Before Ordering

Look up the part in the Parts Index – locations page numbers for every callout in the diagrams. Cross-reference the decal and document section for the label part numbers. Then go order with confidence. I tell my guys: if the part number doesn’t match the factory catalog, don’t hit ‘buy’ yet. That rule has saved us more than once.

Also contains a Special Tools section (page 64 for A193) – lists the Ricoh tool numbers for alignment jigs and pin extractors. If you don’t have the tool, the catalog tells you what to order.

Source Authenticity: OEM vs Aftermarket

Aftermarket parts catalogs often consolidate multiple models into one generic PDF and miss the minor revisions that matter. This one is the original Ricoh factory print – 185 pages, 1997, covering Aficio 200, DF43, PT200, AD330, PS330. The part number columns show the actual Ricoh stock numbers. If you’ve been burned by a re-labeled part that didn’t fit, this is your insurance.

Related manuals worth pairing with this catalog: Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide”>Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide – different machine, same philosophy for original hardware. For more office equipment parts, see Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs”>Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs and Longagribusiness 410 DTC, 450, 450 DTC, 470 DTC, 530 DTC 2002 Parts Catalog”>Longagribusiness 410 DTC, 450, 450 DTC, 470 DTC, 530 DTC 2002 Parts Catalog. For background on industrial document control, see Automotive Industry Overview”>Automotive Industry Overview and Internal Combustion Engine”>Internal Combustion Engine.

Does this catalog include the AD330 and PS330 completely?

Yes. Both are covered with their own exploded-view sections. AD330 is the automatic document feeder variant, PS330 is the paper tray unit. The catalog shows all part callouts and the index includes their part numbers. No separate manuals needed.

Can I use this catalog to order parts for a DF43 standalone?

Yes.

Factory parts documentation beats any aftermarket list every time. Stop cross-referencing guesses. Access the Factory Manual and keep your bench stocked with the right parts the first call.