Description

Rexworks SP1000 Parts Catalog – Factory Breakdown for the Silver Series Vibratory Roller

If you’re wrenching on a Rexworks SP1000 Silver Series vibratory roller and you’re guessing which part number fits where, you’re burning time and risking ordering the wrong piece. I’ve been turning wrenches for 28 years, and I’ve seen too many guys grab an aftermarket parts list that’s missing half the exploded views. This is the real deal. The Rexworks SP1000 Parts Catalog – 142 pages of OEM factory parts breakdowns, direct from Rexworks. No reprints, no scanned copies. The original PDF.

Console Assembly and Control Console: Where the Operator Lives

Page 26 gives you the exploded view of the Console Assembly with every single part labeled – from the control console down to the instrument panel. The catalog breaks out the Steering Control Assembly separate from the Console, which matters when you need that specific lever bracket or cable. Aftermarket catalogs often lump these together, then you waste a week waiting for the wrong part.

Hydraulic Tank and Vibrator Tank Assemblies – Don’t Mix Up the Lines

Hydraulic lines on the SP1000 are not forgiving. The catalog shows the Hydraulic Tank Assembly and the Vibrator Tank Assembly as distinct sections. You get the exact fittings, filters, and mounting hardware. The Recommended Service Procedures section (after the air intake system) tells you the intervals and methods for checking fluid levels and changing filters. This isn’t guesswork – it’s what the factory said to do.

Water Pump, Spray Bar, and Scraper Assemblies: Dust Control

The SP1000 uses a pressure water spray system to keep dust down during asphalt compaction. The catalog lists two Water Pump Assembly entries – one for the pump itself, one for the pump and strainer combo. That distinction is critical when ordering. The Spray Bar Assemblies and Scraper Assembly follow, all with part numbers. I’ve seen guys order the wrong spray bar because they didn’t realize there were two different assemblies. This kills that problem.

Engine Exhaust and Air Intake Systems: John Deere 4239A Support

Page 5 in the foreword lists the engine specs – 117 HP John Deere 4239A, 26,935 lbs maximum centrifugal force at 2,500 VPM. The catalog covers the Engine Exhaust System and Air Intake System with OEM part numbers for mufflers, tubing, air cleaners, ducts. The John Deere engine is widely used, but aftermarket parts catalogs for the SP1000 often omit the specific Rexworks brackets and adapters. This catalog includes them.

Source Authenticity: Why This OEM Parts Catalog Beats Aftermarket

Rexworks includes its own Standard Instructions For Ordering Material Lost Or Damaged, a Design Change Disclaimer, and a Warranty Disclaimer. These documents are not fluff – they tell you exactly how the factory handles part supersessions, design changes, and warranty claims. Aftermarket parts catalogs ignore this stuff. You call a dealer with a part number from a generic list, they might tell you it’s been superseded three times since. With the Rexworks original, you have the correct number and the revision history. The Automotive Industry Overview can give you background, but for real-world parts ordering, you need factory data.

Specifications: 117 HP and 26,935 lbs Centrifugal Force

The SP1000 Silver Series is a dual drum drive roller with a turbocharged engine and direct vibration drive. The catalog’s specifications section repeats key numbers from the foreword, including the 0–8 MPH travel speed and the dynamic force selection range. If you’re rebuilding the vibration system, you need the correct bearing and seal part numbers from the Vibrator Tank Assembly – that section is in the catalog. The Automotive Industry Overview equipment sector relies on machines like this, and having the factory parts book is the difference between a two-day repair and a two-week wait.

Frequently Asked Questions

Is this a service manual or a parts catalog?

Parts catalog. Torque specs and procedures are in the service manual, not here.

What machines does this cover?

Rexworks SP1000 Silver Series vibratory roller, serial number range starting with 10GS258. It covers the dual drum drive model with the John Deere 4239A turbo engine.

Can I use this to order replacement parts from my dealer?

Yes, and that’s the whole point. Each assembly – from the console to the water pump to the axles – has an exploded diagram with part numbers. The manual includes Rexworks’ own ordering instructions for lost or damaged material, so you know exactly how to reference parts when calling your dealer. Without this, you’re guessing part numbers from memory or relying on a parts guy who might not have the latest supersessions. I’ve seen guys order the wrong scraper blade three times because they didn’t have the factory diagram. This kills that.

Does the PDF include the warranty disclaimer and design change info?

Yes, pages include the warranty disclaimer and design change disclaimer. Important if you’re dealing with a machine that might have updates after the original build date.

Related Manuals

• Rexworks SP-848B Parts Catalog – 182-Page OEM Manual
• Rexworks SP400 1982 Parts Catalog – Factory Specs & Assembly Diagrams
• REXWORKS SP-600D Parts & Service Manual

You’ve got a machine that earns its keep. Don’t waste time with half-assed parts diagrams. Access the Factory Manual and get the right part the first time.