Description

Perkins 1106A-70TA, 1106C-70TA 2011 Operators Manual

I’m Mike Callahan. 28 years ASE Master, six-bay shop in San Antonio. If you’re working on a Perkins 1106A-70TA, 1106C-70TA 2011 Operators Manual engine, you don’t need guesswork – you need the factory book. This 88-page manual from Perkins is what I put in my own tool box. It’s what you need to keep that industrial engine running without burning up a piston or getting yourself hurt.

Most aftermarket stuff you find online is a copy of a copy. Not this. This is the original 2011 print from Perkins, covering both the 1106A-70TA and 1106C-70TA models. It’s not a repair manual – it’s the operation and maintenance manual. That means it tells you how to start it, run it, and keep it alive. You need the service manual for heavy tear-downs, but you need this one for every day.

Safety Section – Page 5 Is Where You Start

That opening section includes Safety Messages, General Hazard Information, Burn Prevention, Fire Prevention and Explosion Prevention, and Crushing Prevention. I’ve seen guys skip page 5 and then wonder why the engine caught fire. Perkins spells out exactly what fluids are combustible, what temperatures cause burns, and how to lift the engine without crushing a hand. If you’re working on a Manual Transmission as well, don’t assume the same fluid. The electrical system section (page 11) warns about battery gas explosions – a real thing. That warning label is not decorative.

Period.

Refill Capacities – Page 36 Gets the Numbers Right

Page 36 lists refill capacities for cooling systems, oil pans, and fuel tanks. Aftermarket manuals often list wrong quantities or forget to specify the correct oil grade for your climate. Perkins gives you the exact numbers for the 1106A-70TA and 1106C-70TA. Use the wrong coolant mix and you’ll crack a head. This page saves you that headache.

Cold Weather Operation – What Perkins Says About Winter Starts

Cold weather operation starts on page 31. If you’re in San Antonio it might not seem urgent, but this engine ends up in generators and pump sets from Canada to the Gulf. Perkins covers ether aid, glow plug usage, and battery cranking requirements. For transmission linkage adjustments on the equipment, check the Manual Transmission manual for your vehicle. But for the engine itself, this section is the only source you should trust.

Maintenance Interval Schedule – Page 54 Needs to Be on The Wall

Maintenance interval schedule from page 54 lays out every service point at specific hours. Oil change every 250 hours? Coolant change after 2000 hours? It’s all there. Skip an interval on a Perkins industrial engine and you’ll be pulling the head because of a plugged oil cooler. The schedule includes daily checks, weekly inspections, and annual overhauls. Write it on the wall above your workbench.

Warranty Section – Page 82 Covers Your Back

Warranty information on page 82 tells you what Perkins covers and what voids the warranty. Using the wrong starting procedure or not following the break-in period? That’s on you. Know the rules before you need to claim. This manual gives you the straight factory language – no third-party interpretation.

Is this manual the same for both the 1106A-70TA and 1106C-70TA?

Yes. The manual covers both models. Page 17 shows the product identification section to confirm which engine you have.

Can I use this manual for troubleshooting electrical faults?

It covers engine electronics on page 13, but it’s not a service manual.

How many pages is it?

88 pages including the index on page 84.

Why would I need an operators manual if I have a service manual?

A service manual tells you how to rebuild the engine. This operators manual tells you how to operate it correctly to avoid needing that rebuild. It includes cold weather starting procedures, correct oil grade for your climate, and safety warnings that prevent fires and injury. I’ve seen shops skip the operators manual and then wonder why the engine throws a rod after they used the wrong starting procedure. This is the baseline documentation that keeps the engine healthy day-to-day. Access it and read it before you turn the key.

Related Manuals

• Perkins 400C 2007 Operators Manual – Factory Specs & Safety
• Perkins 854F-E34T 854E-E34TA Operation Manual
• Perkins 403F-15T 404F-22 404F-22T Operation Manual

If you want to do it right the first time and avoid blowing a head gasket because you used the wrong oil, this is the manual. Access the Factory Manual.