Description

New Holland E18SR 2007 Parts Catalog

New Holland E18SR 2007 Parts Catalog – if you are wrenching on a compact crawler excavator and need to order parts, stop guessing with aftermarket cross-reference sheets. This is the real deal: a 372-page OEM factory document printed in March 2007 by CNH America. Page 3 lays out the full table of contents, and if you have ever tried to rebuild a fuel system or an engine without the correct part numbers, you already know why this catalog matters.

You get exploded-view drawings for every assembly on the machine – upper frame, lower frame, hydraulics, controls, electrical. Each drawing is paired with a parts list that includes the factory part number, description, and quantity. That eliminates the “I think this bolt is M10” headache. The manual covers the E18SR serial range starting at PU08-05001. Use it to verify what you are ordering before you call your dealer.

372 Pages of Factory Parts Breakdown

That number – 372 pages – is not filler. Every page corresponds to a specific assembly group. Start at section 00-001 for fuel filter and oil filter parts, then move through the engine (01-004) and radiator (01-006). The book is organized by machine location, so you don’t hunt through a generic index. Get the part number from the exact illustration that matches the view under your hood. If you are swapping out a fuel line, check section 01-010. Need the full fuel tank installation? Go to 01-011.

What Does the Table of Contents Cover?

The TOC on page 3 lists every section from the upper frame assembly to the lower frame and track roller groups. You will see sections like 01-019 for hydraulics – upper/swing motor to cylinder, and 02-008 for track shoe/belt assembly. This is not a reprint of a third-party summary. These are the exact sections used by New Holland dealership parts departments. If you have ever ordered the wrong idler assembly because the online listing was vague, this TOC puts you back on track.

Fuel System and Engine: Two Critical Sections

Section 00-001 covers the fuel filter – a common wear item that causes rough running if ignored. The engine assembly section (01-004) lists everything from the block to the intake manifold. When you need a gasket set or a water pump, the part number in this catalog matches what the dealer stocks. I have seen too many guys grab a generic “fits-all” filter and then wonder why the machine starves for fuel. Use the OEM part number from page 00-001 and sleep better.

Rely on OEM Specs, Not Aftermarket Copies

Aftermarket parts catalogs are a gamble. They often use blurry screenshots or omit revision notes. This manual is an original CNH publication. The revision history on page 2 tells you exactly which machines each edition covers. No guesswork about whether your E18SR with serial PU08-05001 is included. The book also includes the copyright notice – so you know it is not a PDF scraped from an illegal source. For a parts catalog that you will reference daily, OEM is the only choice.

How to Get the Right Part Number

Open the manual to the section that matches the component you are removing. Compare the illustration to your machine. Write down the part number from the adjacent list. Call your dealer and read that number. That is the procedure. No need to measure bolt pitch or guess the hose length. The exploded view shows every clip, seal, and fastener. I keep a copy of this catalog on my shop tablet for exactly that reason – especially when a customer brings in an E18SR with a leaking hydraulic line. Section 01-030 for remote control lines gives you the exact hose assemblies.

Related manuals that pair well with this parts catalog: New Holland E18SR Service Manual – 678 Pages OEM Factory Specs for the repair procedures, and Ford New Holland 853 1993 Parts Catalog or Ford New Holland 568 1991 Parts Catalog if you work on older models. For background on how manufacturers structure such publications, see the Automotive Industry Overview.

Does this catalog include service repair steps?

No, it is a parts catalog only. It lists part numbers and exploded views.

Can I use this to order parts from my dealer?

Yes, and that is the main purpose. The part numbers in this catalog are the exact numbers New Holland dealers use. When you walk in with the number from section 01-011 for the fuel tank install, the counterman pulls it up instantly. I have done it dozens of times. The alternative is to bring the old part in and hope the guy behind the counter can match it by eye – which I have done too, but it wastes time. This catalog eliminates that guessing. For the cost of the access, you avoid one wrong-order return fee and it pays for itself. The exploded views also show bolt quantities and gasket thickness, so you can confirm you are getting every piece needed for the job.

If you are keeping a New Holland E18SR in your fleet – whether you are a rental yard or a private owner – this catalog belongs on your hard drive or in a binder. It is 372 pages of factory correctness, from the fuel filter to the track shoes. Access the Factory Manual and get the right parts the first time.