Description

Neuson 5501 WD 2002 Parts Catalog

I’ve seen guys order parts blind – wrong thread pitch, wrong bolt length, then wonder why the machine sits dead for two days. You don’t have that kind of time, and your customer doesn’t have that kind of patience. That’s exactly why the Neuson 5501 WD 2002 Parts Catalog belongs on your shelf. If you’re pulling a part off a Mobilbager 5501 WD, you need its exact factory number before you touch the phone. This is the same 250-page document that Neuson’s own parts counter uses: TEIL A through TEIL D, all original OEM print, no aftermarket translation errors.

Ordering a replacement without the catalog is rolling dice on a $500 hydraulic fitting. The 2002 edition covers every nut, washer, and seal listed with position numbers, quantities, and specs. Page 4 breaks down the table columns so you know what each number means – article number, quantity, description in German, English, French. That table format is the same across all sections. You get the part number, you order it, you move on.

Page 5 tells you exactly what info the parts desk needs: machine type, serial number, engine type and serial, catalog page, position number, order number. Write it down or you get hung up on. This catalog is the only source that gives you those position numbers. Without it, you’re guessing.

What’s Inside the 2002 Neuson 5501 WD Parts Catalog

The document splits into four main parts, each serving a specific job. TEIL A – Allgemeine Informationen / General Informations – covers the general notes and how to read the tables. TEIL B – Teilesuchliste / Parts Number Reference List – is the core: hundreds of line items with factory article numbers. TEIL C – Index – lets you cross-reference a part name or number to locate it in the illustrations. TEIL D – Anbauwerkzeuge / Attachement Tools – lists spare parts for buckets, breakers, and other attachments. Every section is trilingual (DE/EN/FR) so you don’t get lost if the machine came from a European job site.

Why the OEM Parts Number Reference List Matters

I’ve tested aftermarket parts catalogs. Half the numbers are dead wrong – superseded, discontinued, or just made up. The Neuson 5501 WD 2002 Parts Catalog comes straight from Neuson Baumaschinen GmbH in Linz, Austria. That’s the same source the dealer uses. When TEIL B says an M10x25 hex screw is part number 3802224, that’s what arrives. Automotive Industry Overview shows how critical standardized part numbering is – but only if the numbers are original. Aftermarket lists skip the revision history. This catalog doesn’t.

3 Sections That Save You Time

TEIL B – Parts Number Reference List. Flip here for the raw part numbers grouped by system. Engine, hydraulics, undercarriage – all in one place. Each line gives the article number, quantity per machine, and a specifications column (like thread size or washer thickness).

TEIL C – Index. Need to find a part by name? The index lists every item alphabetically (by German term) and points you to the page and position number. Saves digging through 200 pages blind.

TEIL D – Attachment Tools. This is the section most DIY guys forget. Bucket teeth, quick coupler pins, hydraulic hose kits for breakers – all listed with their factory numbers. Order the wrong tooth pin and the bucket falls off mid-swing. That’s a safety risk.

Ordering Parts: What This Manual Tells You

Page 5 has a block you need to memorize: always state the machine type (5501 WD), serial number, engine type and serial, the catalog page you’re using, the position number from the illustration, and the order number. I’ve stood behind parts counters where the clerk wouldn’t even look up the number without that info. This catalog makes you look like you know what you’re doing. And it keeps you from ordering the wrong part because you misread a superscript.

Does This Catalog Cover the 5501 WD?

Yes – it’s the specific 2002 edition for the Mobilbager 5501 WD model. No cross-model compromises. The serial number range is on the title page (not included in excerpt, but the catalog is model-specific). If you own a 5501 WD from 2002 or later, this is the parts document you need. Earlier models? Check the Wacker Neuson 8002 RD 2009 Parts Catalog – Factory Spare Parts or the Wacker Neuson LOCUST 752 2007 Parts Catalog for related machines. The Wacker Neuson 6502 WD, 6502 2008 Parts Catalog – OEM Factory Spare Parts also follows the same layout.

Can I use this catalog for repair procedures?

No – this is a parts catalog, not a service manual. It lists part numbers and quantities but won’t tell you torque specs or removal steps. You need the factory service manual for that.

How do I find the correct part number quickly?

Start with TEIL C (Index). Look up the part name in German – most construction parts are labeled in the index. Note the page and position number. Then go to that page in TEIL B, find the position, and copy the article number. Always cross-check the specifications column (thread size, length) against the old part you pulled. If the old part is gone, measure it. Page 4 shows how the table columns work. Once you have the article number, give it to the dealer with your machine serial number. Avoids the “we think that’s the one” phone game.

If you’ve been burning hours hunting down the right pin or seal for a Neuson 5501 WD, stop. Automotive Industry Overview highlights why factory documentation eliminates the guesswork. Get the actual OEM list – Access the Factory Manual now and keep it on your tablet next to the machine.